(Deleted)

(Deleted)

Electric double layer capacitors of UN No. 3499, manufactured before 1 January 2014, need not be
marked with the energy storage capacity in Wh as required by sub-paragraph (e) of special provision
361 of Chapter 3.3.

Asymmetric capacitors of UN No. 3508, manufactured before 1 January 2016, need not be marked
with the energy storage capacity in Wh as required by sub-paragraph (c) of special provision 372 of
Chapter 3.3.

The instructions in writing in accordance with the requirements of ADR applicable up to 31 December
2014, but which do not however conform to the requirements of 5.4.3 applicable as from 1 January
2015, may continue to be used until 30 June 2017.

Driver training certificates issued before 1 January 2014 that do not comply with the requirements
under 8.2.2.8.5 applicable from 1 January 2013 in respect of the sequence used for the presentation of
dates under numbers 4. and 8., the colour (white with black lettering), and the use of the numbers 9.
and 10. on the back of the certificate to introduce the corresponding lists of classes for which the
certificate is valid, may continue to be used until their date of expiry.

(Reserved)

Contracting Parties may continue to issue training certificates for dangerous goods safety advisers
conforming to the model applicable until 31 December 2016, instead of those conforming to the
requirements of 1.8.3.18 applicable from 1 January 2017, until 31 December 2018. Such certificates
may continue in use to the end of their five year validity.

Notwithstanding the requirements of special provision 188 of Chapter 3.3 applicable as from 1
January 2017, packages containing lithium cells or batteries may continue to be marked until 31
December 2018 in accordance with the requirements of special provision 188 of Chapter 3.3 in force
up to 31 December 2016

Notwithstanding the requirements of ADR applicable as from 1 January 2017, articles of UN
Nos. 0015, 0016 and 0303 containing smoke-producing substance(s) toxic by inhalation according to
the criteria for Class 6.1 manufactured before 31 December 2016 may be carried until 31 December
2018 without a "TOXIC" subsidiary risk label (model No. 6.1, see 5.2.2.2.2).

Notwithstanding the requirements of ADR applicable as from 1 January 2017, large packagings
conforming to the packing group III performance level in accordance with special packing provision
L2 of packing instruction LP02 of 4.1.4.3 applicable until 31 December 2016 may continue to be used
until 31 December 2022 for UN No. 1950.

Notwithstanding the requirements of column (5) of Table A of Chapter 3.2 applicable as from 1
January 2017 to UN Nos. 3090, 3091, 3480 and 3481, the Class 9 label (model No 9, see 5.2.2.2.2)
may continue to be used for these UN numbers until 31 December 2018.

Vehicles registered or brought into service before 1 July 2017, as defined in special provisions 240,
385 and 669 of Chapter 3.3, and their equipment intended for use during carriage, which conform to
the requirements of ADR applicable until 31 December 2016 but containing lithium cells and batteries
which do not conform to the requirement of 2.2.9.1.7 may continue to be carried as a load in
accordance with the requirements of special provision 666 of Chapter 3.3.

Pressure receptacles and receptacles for Class 2

Receptacles built before 1 January 1997 and which do not conform to the requirements of ADR
applicable as from 1 January 1997, but the carriage of which was permitted under the requirements of
ADR applicable up to 31 December 1996, may continue to be transported after that date if the
periodic test requirements in packing instructions P200 and P203 are complied with.
Previous Matter Next Matter

adrbook.com - Copyright all rights reserved. © 2015-2018