Outer packaging

Plastics receptacle with outer steel or aluminium drum 6HA1 or 6HB1; the relevant requirements of
6.1.4.1 or 6.1.4.2, as appropriate, apply to the construction of the outer packaging.

Plastics receptacle with outer steel or aluminium crate or box 6HA2 or 6HB2; the relevant
requirements of 6.1.4.14 apply to the construction of the outer packaging.

Plastics receptacle with outer wooden box 6HC; the relevant requirements of 6.1.4.9 apply to the
construction of the outer packaging.

Plastics receptacle with outer plywood drum 6HD1; the relevant requirements of 6.1.4.5 apply to the
construction of the outer packaging.

Plastics receptacle with outer plywood box 6HD2; the relevant requirements of 6.1.4.10 apply to the
construction of the outer packaging.

Plastics receptacle with outer fibre drum 6HG1; the requirements of 6.1.4.7.1 to 6.1.4.7.4 apply to the
construction of the outer packaging.

Plastics receptacle with outer fibreboard box 6HG2; the relevant requirements of 6.1.4.12 apply to the
construction of the outer packaging.

Plastics receptacle with outer plastics drum 6HH1; the requirements of 6.1.4.8.1 to 6.1.4.8.6 apply to
the construction of the outer packaging.

Plastics receptacles with outer solid plastics box (including corrugated plastics material) 6HH2; the
requirements of 6.1.4.13.1 and 6.1.4.13.4 to 6.1.4.13.6 apply to the construction of the outer
packaging.

Composite packagings (glass, porcelain or stoneware)

6PA1 receptacle with outer steel drum
6PA2 receptacle with outer steel crate or box
6PB1 receptacle with outer aluminium drum
6PB2 receptacle with outer aluminium crate or box
6PC receptacle with outer wooden box
6PD1 receptacle with outer plywood drum
6PD2 receptacle with outer wickerwork hamper
6PG1 receptacle with outer fibre drum
6PG2 receptacle with outer fibreboard box
6PH1 receptacle with outer expanded plastics packaging
6PH2 receptacle with outer solid plastics packaging

Inner receptacle

Receptacles shall be of a suitable form (cylindrical or pear-shaped) and be made of good quality
material free from any defect that could impair their strength. The walls shall be sufficiently thick at
every point and free from internal stresses.

Screw-threaded plastics closures, ground glass stoppers or closures at least equally effective shall be
used as closures for receptacles. Any part of the closure likely to come into contact with the contents
of the receptacle shall be resistant to those contents. Care shall be taken to ensure that the closures are
so fitted as to be leakproof and are suitably secured to prevent any loosening during carriage. If vented
closures are necessary, they shall comply with 4.1.1.8.

The receptacle shall be firmly secured in the outer packaging by means of cushioning and/or
absorbent materials.
Previous Matter Next Matter

adrbook.com - Copyright all rights reserved. © 2015-2018