|
Title of document |
Applicable sub- sections and paragraphs |
Applicable for new type approvals or for renewals |
Latest date for withdrawal of existing type approvals |
(1) |
(2) |
(3) |
(4) |
(5) |
for design and construction |
||||
Annex I, Parts 1 to 3 to 84/525/EEC |
Council directive on the approximation of the laws of the Member States relating to seamless steel gas cylinders, published in the Official Journal of the European Communities No. L300 of 19.11.1984 |
6.2.3.1 and 6.2.3.4 |
Until further notice |
|
Annex I, Parts 1 to 3 to 84/526/EEC |
Council directive on the approximation of the laws of the Member States relating to seamless, unalloyed aluminium and aluminium alloy gas cylinders, published in the Official Journal of the European Communities No. L300 of 19.11.1984 |
6.2.3.1 and 6.2.3.4 |
Until further notice |
|
Annex I, Parts 1 to 3 to 84/527/EEC |
Council directive on the approximation of the laws of the Member States relating to welded unalloyed steel gas cylinders, published in the Official Journal of the European Communities No. L300 of 19.11.1984 |
6.2.3.1 and 6.2.3.4 |
Until further notice |
|
EN 1442:1998 + AC:1999 |
Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) - Design and construction |
6.2.3.1 and 6.2.3.4 |
Between 1 July 2001 and 30 June 2007 |
31 December 2012 |
EN 1442:1998 + A2:2005 |
Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) - Design and construction |
6.2.3.1 and 6.2.3.4 |
Between 1 January 2007 and 31 December 2010 |
|
EN 1442:2006 + A1:2008 |
Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) - Design and construction |
6.2.3.1 and 6.2.3.4 |
Until further notice |
|
EN 1800:1998 + AC:1999 |
Transportable gas cylinders - Acetylene cylinders - Basic requirements and definitions |
6.2.1.1.9 |
Between 1 July 2001 and 31 December 2010 |
|
EN 1800:2006 |
Transportable gas cylinders - Acetylene cylinders - Basic requirements, definitions and type testing |
6.2.1.1.9 |
Between 1 January 2009 and 31 December 2016 |
Reference |
Title of document |
Applicable sub- sections and paragraphs |
Applicable for new type approvals or for renewals |
Latest date for withdrawal of existing type approvals |
(1) |
(2) |
(3) |
(4) |
(5) |
EN ISO 3807:2013 |
Gas cylinders – Acetylene cylinders – Basic requirements and type testing NOTE: Fusible plugs shall not be fitted. |
6.2.1.1.9 |
Until further notice |
|
EN 1964-1:1999 |
Transportable gas cylinders – Specifications for the design and construction of refillable transportable seamless steel gas cylinders of capacity from 0.5 litres up to 150 litres – Part 1: Cylinders made of seamless steel with a Rm value of less than 1 100 MPa |
6.2.3.1 and 6.2.3.4 |
Until 31 December 2014 |
|
EN 1975:1999 (except Annex G) |
Transportable gas cylinders – Specifications for the design and construction of refillable transportable seamless aluminium and aluminium alloy gas cylinders of capacity from 0.5 litres up to 150 litres |
6.2.3.1 and 6.2.3.4 |
Until 30 June 2005 |
|
EN 1975:1999 + A1:2003 |
Transportable gas cylinders – Specifications for the design and construction of refillable transportable seamless aluminium and aluminium alloy gas cylinders of capacity from 0.5 litres up to 150 litres |
6.2.3.1 and 6.2.3.4 |
Between 1 January 2009 and 31 December 2016 |
|
EN ISO 7866:2012 + AC:2014 |
Gas cylinders – Refillable seamless aluminium alloy gas cylinders – Design, construction and testing (ISO 7866:2012) |
6.2.3.1 and 6.2.3.4 |
Until further notice |
|
EN ISO 11120:1999 |
Gas cylinders – Refillable seamless steel tubes for compressed gas transport of water capacity between 150 litres and 3 000 litres – Design, construction and testing |
6.2.3.1 and 6.2.3.4 |
Between 1 July 2001 and 30 June 2015 |
31 December 2015 for tubes marked with the letter "H" in accordance with 6.2.2.7.4 (p) |
EN ISO 11120:1999 + A1:2013 |
Gas cylinders – Refillable seamless steel tubes for compressed gas transport of water capacity between 150 litres and 3 000 litres – Design, construction and testing |
6.2.3.1 and 6.2.3.4 |
Until further notice |
|
EN 1964-3:2000 |
Transportable gas cylinders – Specifications for the design and construction of refillable transportable seamless steel gas cylinders of capacity from 0.5 litre up to 150 litres – Part 3: Cylinders made of seamless stainless steel with an Rm value of less than 1 100 MPa |
6.2.3.1 and 6.2.3.4 |
Until further notice |
|
EN 12862:2000 |
Transportable gas cylinders- Specifications for the design and construction of refillable transportable welded aluminium alloy gas cylinders |
6.2.3.1 and 6.2.3.4 |
Until further notice |
|
EN 1251-2:2000 |
Cryogenic vessels – Transportable, vacuum insulated, of not more than 1 000 litres volume – Part 2: Design, fabrication, inspection and testing NOTE: Standard EN 1252-1:1998 referenced in this standard is also applicable to closed cryogenic receptacles for the carriage of UN No. 1972 (METHANE, REFRIGERATED LIQUID or NATURAL GAS, REFRIGERATED LIQUID). |
6.2.3.1 and 6.2.3.4 |
Until further notice |
Reference |
Title of document |
Applicable sub- sections and paragraphs |
Applicable for new type approvals or for renewals |
Latest date for withdrawal of existing type approvals |
(1) |
(2) |
(3) |
(4) |
(5) |
EN 12257:2002 |
Transportable gas cylinders – Seamless, hoop wrapped composite cylinders |
6.2.3.1 and 6.2.3.4 |
Until further notice |
|
EN 12807:2001 (except Annex A) |
Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG) – Design and construction |
6.2.3.1 and 6.2.3.4 |
Between 1 January 2005 and 31 December 2010 |
31 December 2012 |
EN 12807:2008 |
Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG) – Design and construction |
6.2.3.1 and 6.2.3.4 |
Until further notice |
|
EN 1964-2:2001 |
Transportable gas cylinders – Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0.5 litre up to and including 150 litre – Part 2: Cylinders made of seamless steel with an Rm value of 1 100 MPa and above |
6.2.3.1 and 6.2.3.4 |
Until 31 December 2014 |
|
EN ISO 9809-1:2010 |
Gas cylinders — Refillable seamless steel gas cylinders — Design, construction and testing – Part 1: Quenched and tempered steel cylinders with tensile strength less than 1100 MPa (ISO 9809-1:2010) |
6.2.3.1 and 6.2.3.4 |
Until further notice |
|
EN ISO 9809-2:2010 |
Gas cylinders — Refillable seamless steel gas cylinders — Design, construction and testing – Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1100 MPa (ISO 9809-2:2010) |
6.2.3.1 and 6.2.3.4 |
Until further notice |
|
EN ISO 9809-3:2010 |
Gas cylinders — Refillable seamless steel gas cylinders — Design, construction and testing – Part 3: Normalized steel cylinders (ISO 9809-3:2010) |
6.2.3.1 and 6.2.3.4 |
Until further notice |
|
EN 13293:2002 |
Transportable gas cylinders – Specification for the design and construction of refillable transportable seamless normalised carbon manganese steel gas cylinders of water capacity up to 0.5 litre for compressed, liquefied and dissolved gases and up to 1 litre for carbon dioxide |
6.2.3.1 and 6.2.3.4 |
Until further notice |
|
EN 13322-1:2003 |
Transportable gas cylinders – Refillable welded steel gas cylinders – Design and construction – Part 1: Welded steel |
6.2.3.1 and 6.2.3.4 |
Until 30 June 2007 |
|
EN 13322-1:2003 + A1:2006 |
Transportable gas cylinders – Refillable welded steel gas cylinders – Design and construction – Part 1: Welded steel |
6.2.3.1 and 6.2.3.4 |
Until further notice |
|
EN 13322-2:2003 |
Transportable gas cylinders – Refillable welded stainless steel gas cylinders – Design and construction – Part 2: Welded stainless steel |
6.2.3.1 and 6.2.3.4 |
Until 30 June 2007 |
|
EN 13322-2:2003 + A1:2006 |
Transportable gas cylinders – Refillable welded stainless steel gas cylinders – Design and construction – Part 2: Welded stainless steel |
6.2.3.1 and 6.2.3.4 |
Until further notice |
|
EN 12245:2002 |
Transportable gas cylinders – Fully wrapped composite cylinders |
6.2.3.1 and 6.2.3.4 |
Until 31 December 2014 |
|
EN 12245:2009 +A1:2011 |
Transportable gas cylinders – Fully wrapped composite cylinders |
6.2.3.1 and 6.2.3.4 |
Until further notice |
Reference |
Title of document |
Applicable sub- sections and paragraphs |
Applicable for new type approvals or for renewals |
Latest date for withdrawal of existing type approvals |
(1) |
(2) |
(3) |
(4) |
(5) |
EN 12205:2001 |
Transportable gas cylinders – Non refillable metallic gas cylinders |
6.2.3.1 and 6.2.3.4 |
Between 1 January 2005 and 31 December 2017 |
31 December 2018 |
EN ISO 11118:2015 |
Gas cylinders – Non-refillable metallic gas cylinders – Specification and test methods |
6.2.3.1, 6.2.3.3 and 6.2.3.4 |
Until further notice |
|
EN 13110:2002 |
Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) – Design and construction |
6.2.3.1 and 6.2.3.4 |
Until 31 December 2014 |
|
EN 13110:2012 |
Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) – Design and construction |
6.2.3.1 and 6.2.3.4 |
Until further notice |
|
EN 14427:2004 |
Transportable refillable fully wrapped composite cylinders for liquefied petroleum gases - Design and construction NOTE: This standard applies only to cylinders equipped with pressure relief valves. |
6.2.3.1 and 6.2.3.4 |
Between 1 January 2005 and 30 June 2007 |
|
EN 14427:2004 + A1:2005 |
Transportable refillable fully wrapped composite cylinders for liquefied petroleum gases - Design and construction NOTE 1: This standard applies only to cylinders equipped with pressure relief valves. NOTE 2: In 5.2.9.2.1 and 5.2.9.3.1, both cylinders shall be subject to a burst test when they show damage equal to or worse than the rejection criteria. |
6.2.3.1 and 6.2.3.4 |
Between 1 January 2007 and 31 December 2016 |
|
EN 14427:2014 |
LPG Equipment and accessories – Transportable refillable fully wrapped composite cylinders for LPG – Design and construction |
6.2.3.1 and 6.2.3.4 |
Until further notice |
|
EN 14208:2004 |
Transportable gas cylinders – Specification for welded pressure drums up to 1000 litres capacity for the transport of gases – Design and construction |
6.2.3.1 and 6.2.3.4 |
Until further notice |
|
EN 14140:2003 |
Transportable refillable welded steel cylinders for Liquefied Petroleum Gas (LPG) – Alternative design and construction |
6.2.3.1 and 6.2.3.4 |
Between 1 January 2005 and 31 December 2010 |
|
EN 14140:2003 + A1:2006 |
LPG equipment and accessories – Transportable refillable welded steel cylinders for LPG – Alternative design and construction |
6.2.3.1 and 6.2.3.4 |
Between 1 January 2009 and 31 December 2018 |
|
EN 14140:2014 +AC:2015 (except over- moulded cylinders) |
LPG Equipment and accessories – Transportable refillable welded steel cylinders for LPG – Alternative design and construction |
6.2.3.1 and 6.2.3.4 |
Until further notice |
|
EN 13769:2003 |
Transportable gas cylinders – Cylinder bundles – Design, manufacture, identification and testing |
6.2.3.1 and 6.2.3.4 |
Until 30 June 2007 |
|
EN 13769:2003 + A1:2005 |
Transportable gas cylinders – Cylinder bundles – Design, manufacture, identification and testing |
6.2.3.1 and 6.2.3.4 |
Until 31 December 2014 |
Reference |
Title of document |
Applicable sub- sections and paragraphs |
Applicable for new type approvals or for renewals |
Latest date for withdrawal of existing type approvals |
(1) |
(2) |
(3) |
(4) |
(5) |
EN ISO 10961:2012 |
Gas cylinders – Cylinder bundles – Design, manufacture, testing and inspection |
6.2.3.1 and 6.2.3.4 |
Until further notice |
|
EN 14638-1:2006 |
Transportable gas cylinders – Refillable welded receptacles of a capacity not exceeding 150 litres – Part 1 Welded austenitic stainless steel cylinders made to a design justified by experimental methods |
6.2.3.1 and 6.2.3.4 |
Until further notice |
|
EN 14893:2006 + AC:2007 |
LPG equipment and accessories – Transportable LPG welded steel pressure drums with a capacity between 150 and 1 000 litres |
6.2.3.1 and 6.2.3.4 |
Between 1 January 2009 and 31 December 2016 |
|
EN 14893:2014 |
LPG equipment and accessories – Transportable LPG welded steel pressure drums with a capacity between 150 and 1 000 litres |
6.2.3.1 and 6.2.3.4 |
Until further notice |
|
EN 14638-3:2010 + AC:2012 |
Transportable gas cylinders — Refillable welded receptacles of a capacity not exceeding 150 litres — Part 3: Welded carbon steel cylinders made to a design justified by experimental methods |
6.2.3.1 and 6.2.3.4 |
Until further notice |
|
for closures |
||||
EN 849:1996 (except Annex A) |
Transportable gas cylinders – Cylinder valves – Specification and type testing |
6.2.3.1 and 6.2.3.3 |
Until 30 June 2003 |
31 December 2014 |
EN 849:1996 + A2:2001 |
Transportable gas cylinders – Cylinder valves – Specification and type testing |
6.2.3.1 and 6.2.3.3 |
Until 30 June 2003 |
31 December 2016 |
EN ISO 10297:2006 |
Transportable gas cylinders – Cylinder valves – Specification and type testing |
6.2.3.1 and 6.2.3.3 |
Between 1 January 2009 and 31 December 2018 |
|
EN ISO 10297:2014 |
Gas cylinders – Cylinder valves – Specification and type testing (ISO/DIS 10297:2012) |
6.2.3.1 and 6.2.3.3 |
Until further notice |
|
EN ISO 14245:2010 |
Gas cylinders – Specifications and testing of LPG cylinder valves – Self- closing (ISO 14245:2006) |
6.2.3.1 and 6.2.3.3 |
Until further notice |
|
EN 13152:2001 |
Specifications and testing of LPG – Cylinder valves – Self closing |
6.2.3.1 and 6.2.3.3 |
Between 1 January 2005 and 31 December 2010 |
|
EN 13152:2001 + A1:2003 |
Specifications and testing of LPG – Cylinder valves – Self closing |
6.2.3.1 and 6.2.3.3 |
Between 1 January 2009 and 31 December 2014 |
|
EN ISO 15995:2010 |
Gas cylinders – Specifications and testing of LPG cylinder valves – Manually operated (ISO 15995:2006) |
6.2.3.1 and 6.2.3.3 |
Until further notice |
|
EN 13153:2001 |
Specifications and testing of LPG – Cylinder valves – Manually operated |
6.2.3.1 and 6.2.3.3 |
Between 1 January 2005 and 31 December 2010 |
|
EN 13153:2001 + A1:2003 |
Specifications and testing of LPG – Cylinder valves – Manually operated |
6.2.3.1 and 6.2.3.3 |
Between 1 January 2009 and 31 December 2014 |
|
EN ISO 13340:2001 |
Transportable gas cylinders – Cylinder valves for non-refillable cylinders – Specification and prototype testing |
6.2.3.1 and 6.2.3.3 |
Between 1 January 2011 and 31 December 2017 |
31 December 2018 |
Reference |
Title of document |
Applicable sub- sections and paragraphs |
Applicable for new type approvals or for renewals |
Latest date for withdrawal of existing type approvals |
(1) |
(2) |
(3) |
(4) |
(5) |
EN 13648-1:2008 |
Cryogenic vessels – Safety devices for protection against excessive pressure – Part 1: Safety valves for cryogenic service |
6.2.3.1 and 6.2.3.4 |
Until further notice |
|
EN 1626:2008 (except valve category B) |
Cryogenic vessels – Valves for cryogenic service |
6.2.3.1 and 6.2.3.4 |
Until further notice |
|
EN 13175:2014 |
LPG Equipment and accessories – Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings |
6.2.3.1 and 6.2.3.3 |
Until further notice |
|
EN ISO 17871:2015 |
Gas cylinders – Quick-release cylinder valves - Specification and type testing (ISO 17871:2015) |
6.2.3.1, 6.2.3.3 and 6.2.3.4 |
Until further notice |
|
EN 13953:2015 |
LPG equipment and accessories – Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG) NOTE: The final sentence of the scope shall not apply. |
6.2.3.1, 6.2.3.3 and 6.2.3.4 |
Until further notice |
|
EN ISO 14246:2014 |
Gas cylinders – Cylinder valves – Manufacturing tests and examinations (ISO 14246:2014) |
6.2.3.1 and 6.2.3.4 |
Until further notice |
Title of document |
Applicable |
|
(1) |
(2) |
(3) |
for periodic inspection and test |
||
EN 1251-3:2000 |
Cryogenic vessels – Transportable, vacuum insulated, of not more than 1 000 litres volume – Part 3: Operational requirements |
Until further notice |
EN 1968:2002 + A1:2005 (except Annex B) |
Transportable gas cylinders – Periodic inspection and testing of seamless steel gas cylinders |
Until further notice |
EN 1802:2002 (except Annex B) |
Transportable gas cylinders – Periodic inspection and testing of seamless aluminium alloy gas cylinders |
Until further notice |
EN ISO 10462:2013 |
Gas cylinders – Acetylene cylinders – Periodic inspection and maintenance (ISO 10462:2013) |
Until further notice |
EN 1803:2002 (except Annex B) |
Transportable gas cylinders – Periodic inspection and testing of welded steel gas cylinders |
Until further notice |
EN ISO 11623:2002 (except clause 4) |
Transportable gas cylinders – Periodic inspection and testing of composite gas cylinders |
Until 31 December 2018 |
EN ISO 11623:2015 |
Gas cylinders – Composite construction – Periodic inspection and testing |
Mandatorily from 1 January 2019 |
Reference |
Title of document |
Applicable |
(1) |
(2) |
(3) |
EN ISO 22434:2011 |
Transportable gas cylinders – Inspection and maintenance of cylinder valves (ISO 22434:2006) |
Until further notice |
EN 14876:2007 |
Transportable gas cylinders – Periodic inspection and testing of welded steel pressure drums |
Until further notice |
EN 14912:2005 |
LPG equipment and accessories – Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders |
Until 31 December 2018 |
EN 14912:2015 |
LPG equipment and accessories – Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders |
Mandatorily from 1 January 2019 |
EN 1440:2008 + A1:2012 (except Annexes G and H) |
LPG equipment and accessories – Periodic inspection of transportable refillable LPG cylinders |
Until 31 December 2018 |
EN 1440:2016 (except Annex C) |
LPG equipment and accessories – Transportable refillable traditional welded and brazed steel Liquefied Petroleum Gas (LPG) cylinders – Periodic inspection |
Mandatorily from 1 January 2019 |
EN 16728:2016 (except clause 3.5, Annex F and Annex G) |
LPG equipment and accessories – Transportable refillable LPG cylinders other than traditional welded and brazed steel cylinders – Periodic inspection |
Mandatorily from 1 January 2019 |
EN 15888: 2014 |
Transportable gas cylinders - Cylinder bundles - Periodic inspection and testing |
Until further notice |
(Reserved)
B |
C |
D |
||
Tensile strength, Rm, in MPa (= N/mm2) |
49 to 186 |
196 to 372 |
196 to 372 |
343 to 490 |
Yield stress, Re, in MPa (= N/mm2) (permanent set = 0,2%) |
10 to 167 |
59 to 314 |
137 to 334 |
206 to 412 |
Permanent elongation at fracture (l = 5d), in % |
12 to 40 |
12 to 30 |
12 to 30 |
11 to 16 |
Bend test (diameter of former d = n e, where e is the thickness of the test piece) |
n = 5 (Rm 98) n = 6 (Rm > 98) |
n = 6 (Rm 325) n = 7 (Rm > 325) |
n = 6 (Rm 325) n = 7 (Rm > 325) |
n = 7 (Rm 392) n = 8 (Rm > 392) |
Aluminium Association Series Number a |
1 000 |
5 000 |
6 000 |
2 000 |