Reference to standards
The requirements of this section are deemed to be met if the following standards are complied with:
- for aerosol dispensers (UN No. 1950 aerosols): Annex to Council Directive 75/324/EEC4 as amended
and applicable at the date of manufacture;
- for UN No. 2037, small receptacles containing gas (gas cartridges) containing UN No. 1965,
hydrocarbon gas mixture n.o.s, liquefied: EN 417:2012 Non-refillable metallic gas cartridges for
liquefied petroleum gases, with or without a valve, for use with portable appliances -
Construction, inspection, testing and marking;
3 WHO Publication: "Quality assurance of pharmaceuticals. A compendium of guidelines and related
materials. Volume 2: Good manufacturing practices and inspection".
f the laws of the
Member States relating
ished in the Official Journal of the European Communities No. L 147 of 9.06.1975.
- for UN No. 2037 small receptacles containing gas (gas cartridges) containing non-toxic, nonflammable
compressed or liquefied gases: EN 16509:2014 Transportable gas cylinders - Nonrefillable,
small transportable, steel cylinders of capacities up to and including 120 ml
containing compressed or liquefied gases (compact cylinders) – Design, construction, filling
and testing (excluding clause 9).
REQUIREMENTS FOR THE CONSTRUCTION AND TESTING OF PACKAGINGS FOR CLASS 6.2 INFECTIOUS SUBSTANCES OF CATEGORY A
NOTE: The requirements of this Chapter don't apply to packagings used for the carriage of Class 6.2
substances according to packing instruction P621 of 22.214.171.124.
The requirements of this Chapter apply to packagings intended for the carriage of infectious
substances of Category A.
Requirements for packagings
The requirements for packagings in this section are based on packagings, as specified in 6.1.4,
currently used. In order to take into account progress in science and technology, there is no objection
to the use of packagings having specifications different from those in this Chapter provided that they
are equally effective, acceptable to the competent authority and able successfully to withstand the tests
described in 6.3.5. Methods of testing other than those described in ADR are acceptable provided they
are equivalent, and are recognized by the competent authority.
Packagings shall be manufactured and tested under a quality assurance programme which satisfies the
competent authority in order to ensure that each packaging meets the requirements of this Chapter.
NOTE: ISO 16106:2006 "Packaging – Transport packages for dangerous goods – Dangerous
goods packagings, intermediate bulk containers (IBCs) and large packagings – Guidelines for the
application of ISO 9001" provides acceptable guidance on procedures which may be followed.
Manufacturers and subsequent distributors of packagings shall provide information regarding
procedures to be followed and a description of the types and dimensions of closures (including
required gaskets) and any other components needed to ensure that packages as presented for carriage
are capable of passing the applicable performance tests of this Chapter.
Code for designating types of packagings
The codes for designating types of packagings are set out in 126.96.36.199.
The letters "U" or "W" may follow the packaging code. The letter "U" signifies a special packaging
conforming to the requirements of 188.8.131.52.6. The letter "W" signifies that the packaging, although, of
the same type indicated by the code is manufactured to a specification different from that in 6.1.4 and
is considered equivalent under the requirements of 184.108.40.206.
NOTE 1: The marks indicate that the packaging which bears them corresponds to a successfully
tested design type and that it complies with the requirements of this Chapter which are related to the
manufacture, but not to the use, of the packaging.
NOTE 2: The marks are intended to be of assistance to packaging manufacturers, reconditioners,
packaging users, carriers and regulatory authorities.
NOTE 3: The marks do not always provide full details of the test levels, etc., and these may need to
be taken further into account, e.g. by reference to a test certificate, to test reports or to a register of
successfully tested packagings.
Each packaging intended for use according to ADR shall bear marks which are durable, legible and
placed in a location and of such a size relative to the packaging as to be readily visible. For packages
with a gross mass of more than 30 kg, the marks or a duplicate thereof shall appear on the top or on a
side of the packaging. Letters, numerals and symbols shall be at least 12 mm high, except for
packagings of 30 litres or 30 kg capacity or less, when they shall be at least 6 mm in height and for
packagings of 5 litres or 5 kg or less when they shall be of an appropriate size.
A packaging that meets the requirements of this section and of 6.3.5 shall be marked with:
(a) The United Nations packaging symbol
This symbol shall not be used for any purpose other than certifying that a packaging, a flexible
bulk container, a portable tank or a MEGC complies with the relevant requirements in
Chapter 6.1, 6.2, 6.3, 6.5, 6.6, 6.7 or 6.11;
(b) The code designating the type of packaging according to the requirements of 6.1.2;
(c) The text "CLASS 6.2";
(d) The last two digits of the year of manufacture of the packaging;
(e) The state authorizing the allocation of the mark, indicated by the distinguishing sign used on
vehicles in international road traffic1;
(f) The name of the manufacturer or other identification of the packaging specified by the
(g) For packagings meeting the requirements of 220.127.116.11.6, the letter "U", inserted immediately
following the mark required in (b) above.
Marks shall be applied in the sequence shown in 18.104.22.168 (a) to (g); each mark required in these subparagraphs
shall be clearly separated, e.g. by a slash or space, so as to be easily identifiable. For
examples, see 22.214.171.124.
Any additional marks authorized by a competent authority shall still enable the marks required in
126.96.36.199 to be correctly identified.