Dangerous Goods by Road
The design for special form radioactive material shall require unilateral approval. The design for low
dispersible radioactive material shall require multilateral approval (see also 6.4.23.8).
The design for a fissile material excepted from "FISSILE" classification in accordance with
2.2.7.2.3.5 (f) shall require multilateral approval.
Alternative activity limits for an exempt consignment of instruments or articles in accordance with
2.2.7.2.2.2 (b) shall require multilateral approval.
Any design that requires unilateral approval originating in a country Contracting Party to ADR shall
be approved by the competent authority of this country; if the country where the package design has
been designed is not a Contracting Party to ADR, carriage is possible on condition that:
(a) A certificate has been supplied by this country, proving that the package design satisfies the
technical requirements of ADR, and that this certificate is validated by a competent authority
of an ADR Contracting Party;
(b) If no certificate and no existing package design approval by a country Contracting Party to
ADR has been supplied, the package design is approved by the competent authority of an ADR
Contracting Party.
For designs approved under the transitional measures see 1.6.6.
Applications and approvals for radioactive material carriage
(Reserved)
An application for approval of shipment shall include:
(a) The period of time, related to the shipment, for which the approval is sought;
(b) The actual radioactive contents, the expected modes of carriage, the type of vehicle, and the
probable or proposed route; and
(c) The details of how the precautions and administrative or operational controls, referred to in
the certificate of approval for the package design, if applicable, issued under 5.1.5.2.1 (a) (v),
(vi) or (vii), are to be put into effect.
An application for approval of shipments under special arrangement shall include all the
information
necessary to satisfy the competent authority that the overall level of safety in carriage is at
least equivalent to that which would be provided if all the applicable requirements of ADR had been
met.
The application shall also include:
(a) A statement of the respects in which, and of the reasons why, the shipment cannot be made in
full accordance with the applicable requirements of ADR; and
(b) A statement of any special precautions or special administrative or operational controls
which are to be employed during carriage to compensate for the failure to meet the applicable
requirements of ADR.
An application for approval of Type B(U) or Type C package design shall include:
(a) A detailed description of the proposed radioactive contents with reference to their physical
and chemical states and the nature of the radiation emitted;
(b) A detailed statement of the design, including complete engineering drawings and schedules of
materials and methods of manufacture;
(c) A statement of the tests which have been done and their results, or evidence based on
calculative methods or other evidence that the design is adequate to meet the applicable
requirements;
(d) The proposed operating and maintenance instructions for the use of the packaging;
(e) If the package is designed to have a maximum normal operating pressure in excess of 100 kPa
gauge, a specification of the materials of manufacture of the containment system, the samples to be
taken, and the tests to be made;
(f) Where the proposed radioactive contents are irradiated nuclear fuel, a statement and a
justification of any assumption in the safety analysis relating to the characteristics of the fuel
and a description of any pre-shipment measurement as required by 6.4.11.5 (b);
(g) Any special stowage provisions necessary to ensure the safe dissipation of heat from the
package considering the various modes of carriage to be used and type of vehicle or container;
(h) A reproducible illustration, not larger than 21 cm by 30 cm, showing the make-up of the
package; and
(i) A specification of the applicable management system as required in 1.7.3.
An application for approval of a Type B(M) package design shall include, in addition to the general
information required in 6.4.23.4 for Type B(U) packages:
(a) A list of the requirements specified in 6.4.7.5, 6.4.8.4 to 6.4.8.6 and 6.4.8.9 to 6.4.8.15
with which the package does not conform;
(b) Any proposed supplementary operational controls to be applied during carriage not regularly
provided for in this Annex, but which are necessary to ensure the safety of the package or to
compensate for the deficiencies listed in (a) above;
(c) A statement relative to any restrictions on the mode of carriage and to any special loading,
carriage, unloading or handling procedures; and
(d)
A statement of the range of ambient conditions (temperature, solar radiation) which are
expected to be encountered during carriage and which have been taken into account in the
design.
The application for approval of designs for packages containing 0.1 kg or more of uranium
hexafluoride shall include all information necessary to satisfy the competent authority that the design
meets the applicable requirements of 6.4.6.1, and a description of the applicable management system
as required in 1.7.3.
An application for a fissile package approval shall include all information necessary to satisfy the
competent authority that the design meets the applicable requirements of 6.4.11.1, and a specification
of the applicable management system as required by 1.7.3.
An application for approval of design for special form radioactive material and design
for low
dispersible radioactive material shall include:
(a) A detailed description of the radioactive material or, if a capsule, the contents; particular
reference shall be made to both physical and chemical states;
(b) A detailed statement of the design of any capsule to be used;
(c) A statement of the tests which have been done and their results, or evidence based on
calculative methods to show that the radioactive material is capable of meeting the performance
standards, or other evidence that the special form radioactive material or low dispersible
radioactive material meets the applicable requirements of ADR;
(d) A specification of the applicable management system as required in 1.7.3; and
(e) Any proposed pre-shipment actions for use in the consignment of special form radioactive
material or low dispersible radioactive material.
An application for approval of design for fissile material excepted from "FISSILE" classification in
accordance with Table 2.2.7.2.1.1, under 2.2.7.2.3.5 (f) shall include:
(a) A detailed description of the material; particular reference shall be made to both physical and
chemical states;
(b) A statement of the tests that have been carried out and their results, or evidence based on
calculation methods to show that the material is capable of meeting the requirements specified
in 2.2.7.2.3.6;
(c) A specification of the applicable management system as required in 1.7.3;
(d) A statement of specific actions to be taken prior to shipment.