LP02
|
LP02 |
PACKING INSTRUCTION (SOLIDS) |
LP02 |
||
|
The following large packagings are authorized provided the general provisions of 4.1.1 and 4.1.3 are met: |
||||
|
Inner packagings |
Large outer packagings |
Packing group I |
Packing group II |
Packing group III |
|
Glass 10 kg |
Steel (50A) |
Maximum capacity: 3 m3 |
||
|
Plastics b 50 kg |
Aluminium (50B) |
|||
|
Metal 50 kg |
Metal other than steel or aluminium (50N) |
|||
|
Paper a, b 50 kg |
||||
|
Fibre a, b 50 kg |
Rigid plastics (50H) |
|||
|
Natural wood (50C) |
||||
|
Plywood (50D) |
||||
|
Reconstituted wood (50F) |
||||
|
Fibreboard (50G) |
||||
|
Flexible plastics (51H) c |
||||
|
a These inner packagings shall not be used when the substances being carried may become liquid during carriage. b These inner packagings shall be sift-proof. c To be used with flexible inner packagings only. |
||||
|
Special packing provisions: |
||||
|
L2 Deleted. L3 Note: For UN Nos. 2208 and 3486, carriage by sea in large packagings is prohibited. |
||||
|
LP02 |
PACKING INSTRUCTION (SOLIDS) (cont'd) |
LP02 |
|
Special packing provision specific to RID and ADR: |
||
|
LL1 For UN 3509, large packagings are not required to meet the requirements of 4.1.1.3. Large packagings meeting the requirements of 6.6.4, made leak tight or fitted with a leak tight and puncture resistant sealed liner or bag, shall be used. When the only residues are solids which are not liable to become liquid at temperatures likely to be encountered during carriage, flexible large packagings may be used. When liquid residues are present, rigid large packagings that provide a means of retention (e.g. absorbent material) shall be used. Before being filled and handed over for carriage, every large packaging shall be inspected to ensure that it is free from corrosion, contamination or other damage. Any large packaging showing signs of reduced strength, shall no longer be used (minor dents and scratches are not considered as reducing the strength of the large packaging). Large packagings intended for the carriage of packagings, discarded, empty, uncleaned with residues of Class 5.1 shall be so constructed or adapted that the goods cannot come into contact with wood or any other combustible material. |
||