P002
|
P002 PACKING INSTRUCTION (SOLIDS) P002 |
||||
|
The following packagings are authorized provided the general provisions of 4.1.1 and 4.1.3 are met: |
||||
|
Combination packagings: |
Maximum net mass (see 4.1.3.3) |
|||
|
Inner packagings |
Outer packagings |
Packing group I |
Packing group II |
Packing group III |
|
Glass 10 kg Plastics a 50 kg Metal 50 kg Paper a, b, c 50 kg Fibre a, b, c50 kg |
Drums |
|||
|
steel (1A1, 1A2) |
400 kg |
400 kg |
400 kg |
|
|
aluminium (1B1, 1B2) |
400 kg |
400 kg |
400 kg |
|
|
other metal (1N1, 1N2) |
400 kg |
400 kg |
400 kg |
|
|
plastics (1H1, 1H2) |
400 kg |
400 kg |
400 kg |
|
|
plywood (1D) |
400 kg |
400 kg |
400 kg |
|
|
fibre (1G) |
400 kg |
400 kg |
400 kg |
|
|
Boxes |
||||
|
steel (4A) |
400 kg |
400 kg |
400 kg |
|
|
aluminium (4B) |
400 kg |
400 kg |
400 kg |
|
|
other metal (4N) |
400 kg |
400 kg |
400 kg |
|
|
natural wood (4C1) |
250 kg |
400 kg |
400 kg |
|
|
natural wood with sift proof walls (4C2) |
250 kg |
400 kg |
400 kg |
|
|
plywood (4D) |
250 kg |
400 kg |
400 kg |
|
|
reconstituted wood (4F) |
125 kg |
400 kg |
400 kg |
|
|
fibreboard (4G) |
125 kg |
400 kg |
400 kg |
|
|
expanded plastics (4H1) |
60 kg |
60 kg |
60 kg |
|
|
solid plastics (4H2) |
250 kg |
400 kg |
400 kg |
|
|
Jerricans |
||||
|
steel (3A1, 3A2) |
120 kg |
120 kg |
120 kg |
|
|
aluminium (3B1, 3B2) |
120 kg |
120 kg |
120 kg |
|
|
plastics (3H1, 3H2) |
120 kg |
120 kg |
120 kg |
|
|
Single packagings: |
||||
|
Drums |
||||
|
steel (1A1 or 1A2 d) |
400 kg |
400 kg |
400 kg |
|
|
aluminium (1B1 or 1B2 d) |
400 kg |
400 kg |
400 kg |
|
|
metal, other than steel or aluminium (1N1 or 1N2 d) |
400 kg |
400 kg |
400 kg |
|
|
plastics (1H1 or 1H2 d) |
400 kg |
400 kg |
400 kg |
|
|
fibre (1G) e |
400 kg |
400 kg |
400 kg |
|
|
plywood (1D) e |
400 kg |
400 kg |
400 kg |
|
|
Jerricans |
||||
|
steel (3A1 or 3A2 d) |
120 kg |
120 kg |
120 kg |
|
|
aluminium (3B1 or 3B2 d ) |
120 kg |
120 kg |
120 kg |
|
|
plastics (3H1 or 3H2 d) |
120 kg |
120 kg |
120 kg |
|
|
a These inner packagings shall be sift-proof. b These inner packagings shall not be used when the substances being carried may become liquid during carriage (see 4.1.3.4). c These inner packagings shall not be used for substances of packing group I. d These packagings shall not be used for substances of packing group I that may become liquid during carriage (see 4.1.3.4). |
||||
|
e These packagings shall not be used when substances being carried may become liquid during carriage (see 4.1.3.4). |
||||
(Cont'd on next page)
|
P002 PACKING INSTRUCTION (SOLIDS) (cont’d) P002 |
|||
|
Maximum net mass (see 4.1.3.3) |
|||
|
Single packagings (cont’d): |
Packing group I |
Packing group II |
Packing group III |
|
Boxes |
|||
|
steel (4A) e |
Not allowed |
400 kg |
400 kg |
|
aluminium (4B) e |
Not allowed |
400 kg |
400 kg |
|
other metal (4N) e |
Not allowed |
400 kg |
400 kg |
|
natural wood (4C1) e |
Not allowed |
400 kg |
400 kg |
|
plywood (4D) e |
Not allowed |
400 kg |
400 kg |
|
reconstituted wood (4F) e |
Not allowed |
400 kg |
400 kg |
|
natural wood with sift-proof walls (4C2) e |
Not allowed |
400 kg |
400 kg |
|
fibreboard (4G) e |
Not allowed |
400 kg |
400 kg |
|
solid plastics (4H2) e |
Not allowed |
400 kg |
400 kg |
|
Bags |
|||
|
bags (5H3, 5H4, 5L3, 5M2) e |
Not allowed |
50 kg |
50 kg |
|
Composite packagings |
|||
|
plastics receptacle with outer steel, aluminium, plywood, fibre or plastics drum (6HA1, 6HB1, 6HG1 e , 6HD1 e, or 6HH1) |
400 kg |
400 kg |
400 kg |
|
plastics receptacle with outer steel or aluminium crate or box, wooden box, plywood box, fibreboard box or solid plastics box (6HA2, 6HB2, 6HC, 6HD2 e, 6HG2 e or 6HH2) |
75 kg |
75 kg |
75 kg |
|
glass receptacle with outer steel, aluminium plywood or fibre drum (6PA1, 6PB1, 6PD1 e or 6PG1 e ) or with outer steel or aluminium crate or box or with outer wooden, or fibreboard box or with outer wickerwork hamper (6PA2, 6PB2, 6PC, 6PD2 e, or 6PG2e) or with outer solid plastics or expanded plastics packaging (6PH2 or 6PH1 e) |
75 kg |
75 kg |
75 kg |
|
Pressure receptacles, provided that the general provisions of 4.1.3.6 are met. |
|||
|
e These packagings shall not be used when the substances being carried may become liquid during carriage (see 4.1.3.4). |
|||
(Cont'd on next page)
|
P002 PACKING INSTRUCTION (SOLIDS) (cont’d) P002 |
|
Special packing provisions: PP6 (Deleted)
PP7 For UN No. 2000, celluloid may also be transported unpacked on pallets, wrapped in plastic film and secured by appropriate means, such as steel bands as a full load in closed vehicles or containers. Each pallet shall not exceed 1 000 kg.
PP8 For UN No. 2002, packagings shall be so constructed that explosion is not possible by reason of increased internal pressure. Cylinders, tubes and pressure drums shall not be used for these substances.
PP9 For UN Nos. 3175, 3243 and 3244, packagings shall conform to a design type that has passed a leakproofness test at the packing group II performance level. For UN No. 3175, the leakproofness test is not required when the liquids are fully absorbed in solid material contained in sealed bags.
PP11 For UN No. 1309, packing group III, and UN No. 1362, 5H1, 5L1 and 5M1 bags are allowed if they are overpacked in plastic bags and are wrapped in shrink or stretch wrap on pallets.
PP12 For UN Nos. 1361, 2213 and UN No. 3077, 5H1, 5L1 and 5M1 bags are allowed when carried in closed vehicles or containers.
PP13 For articles classified under UN No. 2870, only combination packagings meeting the packing group I performance level are authorized.
PP14 For UN Nos. 2211, 2698 and 3314, packagings are not required to meet the performance tests in Chapter 6.1.
PP15 For UN Nos. 1324 and 2623, packagings shall meet the packing group III performance level.
PP20 For UN No. 2217, any sift-proof, tearproof receptacle may be used.
PP30 For UN No. 2471, paper or fibre inner packagings are not permitted.
PP34 For UN No. 2969 (as whole beans), 5H1, 5L1 and 5M1 bags are permitted.
PP37 For UN Nos. 2590 and 2212, 5M1 bags are permitted. All bags of any type shall be carried in closed vehicles or containers or be placed in closed rigid overpacks.
PP38 For UN No. 1309, packing group II, bags are permitted only in closed vehicles or containers.
PP84 For UN No. 1057, rigid outer packagings meeting the packing group II performance level shall be used. The packagings shall be designed and constructed and arranged to prevent movement, inadvertent ignition of the devices or inadvertent release of flammable gas or liquid. NOTE: For waste lighters collected separately see Chapter 3.3, special provision 654.
PP92 For UN Nos. 3531 and 3533, packagings shall be designed and constructed to permit the release of gas or vapour to prevent a build-up of pressure that could rupture the packagings in the event of loss of stabilization. |
|
Special packing provision specific to RID and ADR: RR5 Notwithstanding special packing provision PP84, only the general provisions of 4.1.1.1, 4.1.1.2 and 4.1.1.5 to 4.1.1.7 need be complied with if the gross mass of the package is not more than 10 kg. NOTE: For waste lighters collected separately see Chapter 3.3, special provision 654. |