P112(c)

P112(c)

PACKING INSTRUCTION

(Solid dry powder 1.1D)

P112(c)

The following packagings are authorized, provided the general packing provisions of 4.1.1, 4.1.3 and special packing provisions of 4.1.5 are met:

Inner packagings

Intermediate packagings

Outer packagings

Bags

paper, multiwall, water resistant plastics

woven plastics

Receptacles fibreboard metal plastics wood

Bags

paper, multiwall, water resistant with inner lining

plastics

Receptacles metal plastics wood

Boxes

steel (4A) aluminium (4B) other metal (4N)

natural wood, ordinary (4C1) natural wood, sift-proof (4C2) plywood (4D)

reconstituted wood (4F) fibreboard (4G) plastics, solid (4H2)

Drums

steel (1A1, 1A2) aluminium (1B1, 1B2) other metal (1N1, 1N2) plywood (1D)

fibre (1G)

plastics (1H1, 1H2)

Additional requirements:

1. Inner packagings are not required if drums are used as the outer packaging.

2. The packaging shall be sift-proof.

Special packing provisions:

PP26 For UN Nos. 0004, 0076, 0078, 0154, 0216, 0219 and 0386, packagings shall be lead free.

PP46 For UN No. 0209, bags, sift-proof (5H2) are recommended for flake or prilled TNT in the dry state and a maximum net mass of 30 kg.

PP48 For UN No. 0504, metal packagings shall not be used. Packagings of other material with a small amount of metal, for example metal closures or other metal fittings such as those mentioned in 6.1.4, are not considered metal packagings.