P207 |
PACKING INSTRUCTION |
P207 |
This instruction applies to UN No. 1950. |
||
The following packagings are authorized, provided that the general provisions of 4.1.1 and 4.1.3 are met: |
||
(a) Drums (1A1, 1A2, 1B1, 1B2, 1N1, 1N2, 1H1, 1H2, 1D, 1G); |
||
Boxes (4A, 4B, 4N, 4C1, 4C2, 4D, 4F, 4G, 4H1, 4H2). |
||
Packagings shall conform to the packing group II performance level. |
||
(b) Rigid outer packagings with a maximum net mass as follows: |
||
Fibreboard 55 kg |
||
Other than fibreboard 125 kg |
||
The provisions of 4.1.1.3 need not be met. |
||
The packagings shall be designed and constructed to prevent excessive movement of the aerosols and inadvertent discharge during normal conditions of carriage. |
||
Special packing provision: |
||
PP87 For UN 1950 waste aerosols carried in accordance with special provision 327, the packagings shall have a means of retaining any free liquid that might escape during carriage, e.g. absorbent material. The packagings shall be adequately ventilated to prevent the creation of flammable atmosphere and the build-up of pressure. |
||
Special packing provision specific to RID and ADR |
||
RR6 For UN 1950 in the case of carriage by full load, metal articles may also be packed as follows: The articles shall be grouped together in units on trays and held in position with an appropriate plastics cover; these units shall be stacked and suitably secured on pallets. |