The heading of Class 2 covers pure gases, mixtures of gases, mixtures of one or more gases with one or more other substances and articles containing such substances.
A gas is a substance which:
(a) at 50 °C has a vapour pressure greater than 300 kPa (3 bar); or
(b) is completely gaseous at 20 °C at the standard pressure of 101.3 kPa.
NOTE 1: UN No. 1052 HYDROGEN FLUORIDE, ANHYDROUS is nevertheless classified in Class 8.
NOTE 2: A pure gas may contain other components deriving from its production process or added to preserve the stability of the product, provided that the level of these components does not change its classification or its conditions of carriage, such as filling ratio, filling pressure, test pressure.
NOTE 3: N.O.S. entries in 2.2.2.3 may cover pure gases as well as mixtures.
The substances and articles of Class 2 are subdivided as follows:
1. Compressed gas: a gas which when packaged under pressure for carriage is entirely gaseous at
-50 °C; this category includes all gases with a critical temperature less than or equal to -50 °C;
2. Liquefied gas: a gas which when packaged under pressure for carriage is partially liquid at temperatures above -50 °C. A distinction is made between:
High pressure liquefied gas: a gas with a critical temperature above -50 °C and equal to or below +65 °C; and
Low pressure liquefied gas: a gas with a critical temperature above +65 °C;
3. Refrigerated liquefied gas: a gas which when packaged for carriage is made partially liquid because of its low temperature;
4. Dissolved gas: a gas which when packaged under pressure for carriage is dissolved in a liquid phase solvent;
5. Aerosol dispensers and receptacles, small, containing gas (gas cartridges);
6. Other articles containing gas under pressure;
7. Non-pressurized gases subject to special requirements (gas samples);
8. Chemicals under pressure: liquids, pastes or powders, pressurized with a propellant that meets the definition of a compressed or liquefied gas and mixtures thereof.
9. Adsorbed gas: a gas which when packaged for carriage is adsorbed onto a solid porous material resulting in an internal receptacle pressure of less than 101.3 kPa at 20 C and less than 300 kPa at 50 C.
Substances and articles (except aerosols and chemicals under pressure) of Class 2 are assigned to one of the following groups according to their hazardous properties, as follows:
A asphyxiant;
O oxidizing;
F flammable;
T toxic;
TF toxic, flammable;
TC toxic, corrosive;
TO toxic, oxidizing;
TFC toxic, flammable, corrosive;
TOC toxic, oxidizing, corrosive.
For gases and gas mixtures presenting hazardous properties associated with more than one group according to the criteria, the groups designated by letter T take precedence over all other groups. The groups designated by letter F take precedence over the groups designated by letters A or O.
NOTE 1: In the UN Model Regulations, the IMDG Code and the ICAO Technical Instructions, gases are assigned to one of the following three divisions, based on the primary hazard:
Division 2.1: flammable gases (corresponding to the groups designated by the capital letter F);
Division 2.2: non-flammable, non-toxic gases (corresponding to the groups designated by the capital letters A or O);
Division 2.3: toxic gases (corresponding to the groups designated by the capital letter T i.e. T, TF, TC, TO, TFC and TOC).
NOTE 2: Receptacles, small containing gas (UN No. 2037) shall be assigned to the groups A to TOC according to the hazard of the contents. For aerosols (UN No. 1950), see 2.2.2.1.6. For chemicals under pressure (UN Nos. 3500 to 3505), see 2.2.2.1.7.
NOTE 3: Corrosive gases are considered to be toxic, and are therefore assigned to the group TC, TFC or TOC.
If a mixture of Class 2 mentioned by name in Table A of Chapter 3.2 meets different criteria as mentioned in 2.2.2.1.2 and 2.2.2.1.5, this mixture shall be classified according to the criteria and assigned to an appropriate N.O.S. entry.
Substances and articles (except aerosols and chemicals under pressure) of Class 2 which are not mentioned by name in Table A of Chapter 3.2 shall be classified under a collective entry listed in
2.2.2.3 in accordance with 2.2.2.1.2 and 2.2.2.1.3. The following criteria shall apply:
Asphyxiant gases
Gases which are non-oxidizing, non-flammable and non-toxic and which dilute or replace oxygen normally in the atmosphere.
Flammable gases
Gases which at 20 °C and a standard pressure of 101.3 kPa:
(a) are ignitable when in a mixture of 13% or less by volume with air; or
(b) have a flammable range with air of at least 12 percentage points regardless of the lower flammable limit.
Flammability shall be determined by tests or by calculation, in accordance with methods adopted by ISO (see ISO 10156:2010).
Where insufficient data are available to use these methods, tests by a comparable method recognized by the competent authority of the country of origin may be used.
If the country of origin is not a Contracting Party to ADR these methods shall be recognized by the competent authority of the first country Contracting Party to ADR reached by the consignment.
Oxidizing gases
Gases, which may, generally by providing oxygen, cause or contribute to the combustion of other material more than air does. These are pure gases or gas mixtures with an oxidizing power greater than 23.5% as determined by a method specified in ISO 10156:2010.
Toxic gases
NOTE: Gases meeting the criteria for toxicity in part or completely owing to their corrosivity are to be classified as toxic. See also the criteria under the heading "Corrosive gases" for a possible subsidiary corrosivity hazard.
Gases which:
(a) are known to be so toxic or corrosive to humans as to pose a hazard to health; or
(b) are presumed to be toxic or corrosive to humans because they have a LC50 value for acute toxicity equal to or less than 5 000 ml/m³ (ppm) when tested in accordance with 2.2.61.1.
In the case of gas mixtures (including vapours of substances from other classes) the following formula may be used:
LC Toxic (mixture) =
where fi = mole fraction of the ith component substance of the mixture; Ti = toxicity index of the ith component substance of the mixture.
The Ti equals the LC50 value as found in packing instruction P200 of 4.1.4.1.
When no LC50 value is listed in packing instruction P200 of 4.1.4.1, a LC50 value available in scientific literature shall be used.
When the LC50 value is unknown, the toxicity index is determined by using the lowest LC50 value of substances of similar physiological and chemical effects, or through testing if this is the only practical possibility.
Corrosive gases
Gases or gas mixtures meeting the criteria for toxicity completely owing to their corrosivity are to be classified as toxic with a subsidiary corrosivity hazard.
A gas mixture that is considered to be toxic due to the combined effects of corrosivity and toxicity has a subsidiary hazard of corrosivity when the mixture is known by human experience to be destructive to the skin, eyes or mucous membranes or when the LC50 value of the corrosive components of the mixture is equal to or less than 5 000 ml/m3 (ppm) when the LC50 is calculated by the formula:
LC50 Corrosive (mixture) =
where fci = mole fraction of the ith corrosive component substance of the mixture; Tci = toxicity index of the ith corrosive component substance of the mixture.
The Tci equals the LC50 value as found in packing instruction P200 of 4.1.4.1.
When no LC50 value is listed in packing instruction P200 of 4.1.4.1, a LC50 value available in scientific literature shall be used.
When the LC50 value is unknown the toxicity index is determined by using the lowest LC50 value of substances of similar physiological and chemical effects, or through testing if this is the only practical possibility.
Aerosols (UN No. 1950) are assigned to one of the following groups according to their hazardous properties, as follows:
A asphyxiant;
O oxidizing;
F flammable;
T toxic;
C corrosive;
CO corrosive, oxidizing;
FC flammable, corrosive;
TF toxic, flammable;
TC toxic, corrosive;
TO toxic, oxidizing;
TFC toxic, flammable, corrosive; TOC toxic, oxidizing, corrosive.
The classification depends on the nature of the contents of the aerosol dispenser.
NOTE: Gases, which meet the definition of toxic gases according to 2.2.2.1.5 and gases identified as "Considered as pyrophoric" by table note c of Table 2 of packing instruction P200 in 4.1.4.1, shall not be used as a propellant in an aerosol dispenser. Aerosols with contents meeting the criteria for packing group I for toxicity or corrosivity shall not be accepted for carriage (see also 2.2.2.2.2).
The following criteria shall apply:
(a) Assignment to group A shall apply when the contents do not meet the criteria for any other group according to sub-paragraphs (b) to (f) below;
(b) Assignment to group O shall apply when the aerosol contains an oxidizing gas according to 2.2.2.1.5;
(c) Assignment to group F shall apply if the contents include 85% by mass or more flammable components and the chemical heat of combustion is 30 kJ/g or more.
It shall not apply if the contents contain 1% by mass or less flammable components and the heat of combustion is less than 20 kJ/g.
Otherwise the aerosol shall be tested for flammability in accordance with the tests described in the Manual of Tests and Criteria, Part III, section 31. Extremely flammable and flammable aerosols shall be assigned to group F;
NOTE: Flammable components are flammable liquids, flammable solids or flammable gases and gas mixtures as defined in Notes 1 to 3 of sub-section 31.1.3 of Part III of the Manual of Tests and Criteria. This designation does not cover pyrophoric, self-heating or water-reactive substances. The chemical heat of combustion shall be determined by one of the following methods ASTM D 240, ISO/FDIS 13943:1999 (E/F) 86.1 to 86.3 or NFPA 30B.
(d) Assignment to group T shall apply when the contents, other than the propellant of aerosol dispensers to be ejected, are classified as Class 6.1, packing groups II or III;
(e) Assignment to group C shall apply when the contents, other than the propellant of aerosol dispensers to be ejected, meet the criteria for Class 8, packing groups II or III;
(f) When the criteria for more than one group amongst groups O, F, T, and C are met, assignment to groups CO, FC, TF, TC TO, TFC or TOC shall apply, as relevant.
Chemicals under pressure (UN Nos. 3500 to 3505) are assigned to one of the following groups according to their hazardous properties, as follows:
A asphyxiant;
F flammable;
T toxic;
C corrosive;
FC flammable, corrosive; TF toxic, flammable.
The classification depends on the hazard characteristics of the components in the different states:
The propellant; The liquid; or The solid.
NOTE 1: Gases, which meet the definition of toxic gases or of oxidizing gases according to 2.2.2.1.5 or gases identified as "Considered as pyrophoric" by table note c of Table 2 of packing instruction P200 in 4.1.4.1, shall not be used as a propellant in chemicals under pressure.
NOTE 2: Chemicals under pressure with contents meeting the criteria for packing group I for toxicity or corrosivity or with contents meeting both the criteria for packing group II or III for toxicity and for packing group II or III for corrosivity shall not be accepted for carriage under these UN numbers.
NOTE 3: Chemicals under pressure with components meeting the properties of Class 1; liquid desensitized explosives of Class 3; self-reactive substances and solid desensitized explosives of Class 4.1; Class 4.2; Class 4.3; Class 5.1; Class 5.2; Class 6.2; or Class 7, shall not be used for carriage under these UN numbers.
NOTE 4: A chemical under pressure in an aerosol dispenser shall be carried under UN No. 1950.
The following criteria shall apply:
(a) Assignment to group A shall apply when the contents do not meet the criteria for any other group according to sub-paragraphs (b) to (e) below;
(b) Assignment to group F shall apply if one of the components, which can be a pure substance or a mixture, needs to be classified as flammable. Flammable components are flammable liquids and liquid mixtures, flammable solids and solid mixtures or flammable gases and gas mixtures meeting the following criteria:
(i) A flammable liquid is a liquid having a flashpoint of not more than 93 °C;
(ii) A flammable solid is a solid which meets the criteria in 2.2.41.1;
(iii) A flammable gas is a gas which meets the criteria in 2.2.2.1.5;
(c) Assignment to group T shall apply when the contents, other than the propellant, are classified as dangerous goods of Class 6.1, packing groups II or III;
(d) Assignment to group C shall apply when the contents, other than the propellant, are classified as dangerous goods of Class 8, packing groups II or III;
(e) When the criteria for two groups amongst groups F, T, and C are met, assignment to groups FC or TF shall apply, as relevant.
Chemically unstable gases of Class 2 shall not be accepted for carriage unless the necessary precautions have been taken to prevent the possibility of a dangerous decomposition or polymerization under normal conditions of carriage or unless carried in accordance with special packing provision (r) of packing instruction P200 (10) of 4.1.4.1, as applicable. For the precautions necessary to prevent polymerization, see special provision 386 of Chapter 3.3. To this end particular care shall be taken to ensure that receptacles and tanks do not contain any substances liable to promote these reactions.
The following substances and mixtures shall not be accepted for carriage:
- UN No. 2186 HYDROGEN CHLORIDE, REFRIGERATED LIQUID;
- UN No. 2421 NITROGEN TRIOXIDE;
- UN No. 2455 METHYL NITRITE;
- Refrigerated liquefied gases which cannot be assigned to classification codes 3A, 3O or 3F;
- Dissolved gases which cannot be classified under UN Nos. 1001, 2073 or 3318;
- Aerosols where gases which are toxic according to 2.2.2.1.5 or pyrophoric according to packing instruction P200 in 4.1.4.1 are used as propellants;
- Aerosols with contents meeting the criteria for packing group I for toxicity or corrosivity (see
2.2.61 and 2.2.8);
- Receptacles, small, containing gases which are very toxic (LC50 lower than 200 ppm) or pyrophoric according to packing instruction P200 in 4.1.4.1.
Compressed gases |
|
Classification code |
UN Name of the substance or article No. |
1A |
1956 COMPRESSED GAS, N.O.S. |
1O |
3156 COMPRESSED GAS, OXIDIZING, N.O.S. |
1F |
1964 HYDROCARBON GAS MIXTURE, COMPRESSED, N.O.S. 1954 COMPRESSED GAS, FLAMMABLE, N.O.S. |
1T |
1955 COMPRESSED GAS, TOXIC, N.O.S. |
1TF |
1953 COMPRESSED GAS, TOXIC, FLAMMABLE, N.O.S. |
1TC |
3304 COMPRESSED GAS, TOXIC, CORROSIVE, N.O.S. |
1TO |
3303 COMPRESSED GAS, TOXIC, OXIDIZING, N.O.S. |
1TFC |
3305 COMPRESSED GAS, TOXIC, FLAMMABLE, CORROSIVE, N.O.S. |
1TOC |
3306 COMPRESSED GAS, TOXIC, OXIDIZING, CORROSIVE, N.O.S. |
Liquefied gases |
||
Classification code |
UN No. |
Name of the substance or article |
2A |
1058 |
LIQUEFIED GASES, non-flammable, charged with nitrogen, carbon dioxide or air |
|
1078 |
REFRIGERANT GAS, N.O.S. |
|
|
such as mixtures of gases, indicated by the letter R..., which as: |
|
|
Mixture F1, have a vapour pressure at 70 °C not exceeding 1.3 MPa (13 bar) and a |
|
|
density at 50 °C not lower than that of dichlorofluoromethane (1.30 kg/l); |
|
|
Mixture F2, have a vapour pressure at 70 °C not exceeding 1.9 MPa (19 bar) and a |
|
|
density at 50 °C not lower than that of dichlorodifluoromethane (1.21 kg/l); |
|
|
Mixture F3, have a vapour pressure at 70 °C not exceeding 3 MPa (30 bar) and a density |
|
|
at 50 °C not lower than that of chlorodifluoromethane (1.09 kg/l). |
|
|
NOTE: Trichlorofluoromethane (Refrigerant R 11), 1,1,2-trichloro-1,2,2- |
|
|
trifluoroethane (Refrigerant R 113), 1,1,1-trichloro-2,2,2-trifluoroethane (Refrigerant R |
|
|
113a), 1-chloro-1,2,2-trifluoroethane (Refrigerant R 133) and 1-chloro-1,1,2- |
|
|
trifluoroethane (Refrigerant R 133b) are not substances of Class 2. They may, however, |
|
|
enter into the composition of mixtures F1 to F3. |
|
1968 |
INSECTICIDE GAS, N.O.S. |
|
3163 |
LIQUEFIED GAS, N.O.S. |
2O |
3157 |
LIQUEFIED GAS, OXIDIZING, N.O.S. |
2F |
1010 |
BUTADIENES AND HYDROCARBON MIXTURE, STABILIZED, having a vapour |
|
|
pressure at 70 °C not exceeding 1.1 MPa (11 bar) and a density at 50 °C not lower than |
|
|
0.525 kg/l. |
|
|
NOTE: Butadienes, stabilized are also classified under UN No. 1010, see Table A of |
|
|
Chapter 3.2. |
|
1060 |
METHYLACETYLENE AND PROPADIENE MIXTURE, STABILIZED |
|
|
such as mixtures of methylacetylene and propadiene with hydrocarbons, which as: |
|
|
Mixture P1, contain not more than 63% methylacetylene and propadiene by volume and |
|
|
not more than 24% propane and propylene by volume, the percentage of C4- saturated |
|
|
hydrocarbons being not less than 14% by volume; and as |
|
|
Mixture P2, contain not more than 48% methylacetylene and propadiene by volume and |
|
|
not more than 50% propane and propylene by volume, the percentage of C4- saturated |
|
|
hydrocarbons being not less than 5% by volume, |
|
|
as well as mixtures of propadiene with 1 to 4% methylacetylene. |
Liquefied gases (cont'd) |
||
Classification code |
UN No. |
Name of the substance or article |
2F |
1965 |
HYDROCARBON GAS MIXTURE, LIQUEFIED, N.O.S |
(cont'd) |
|
such as mixtures, which as: |
|
|
Mixture A, have a vapour pressure at 70 °C not exceeding 1.1 MPa (11 bar) and a |
|
|
density at 50 °C not lower than 0.525 kg/l; |
|
|
Mixture A01, have a vapour pressure at 70 °C not exceeding 1.6 MPa (16 bar) and a |
|
|
relative density at 50 °C not lower than 0.516 kg/l; |
|
|
Mixture A02, have a vapour pressure at 70 °C not exceeding 1.6 MPa (16 bar) and a |
|
|
relative density at 50 °C not lower than 0.505 kg/l; |
|
|
Mixture A0, have a vapour pressure at 70 °C not exceeding 1.6 MPa (16 bar) and a |
|
|
density at 50 °C not lower than 0.495 kg/l; |
|
|
Mixture A1, have a vapour pressure at 70 °C not exceeding 2.1 MPa (21 bar) and a |
|
|
density at 50 °C not lower than 0.485 kg/l; |
|
|
Mixture B1 have a vapour pressure at 70 °C not exceeding 2.6 MPa (26 bar) and a |
|
|
relative density at 50 °C not lower than 0.474 kg/l; |
|
|
Mixture B2 have a vapour pressure at 70 °C not exceeding 2.6 MPa (26 bar) and a |
|
|
relative density at 50 °C not lower than 0.463 kg/l; |
|
|
Mixture B, have a vapour pressure at 70 °C not exceeding 2.6 MPa (26 bar) and a |
|
|
density at 50 °C not lower than 0.450 kg/l; |
|
|
Mixture C, have a vapour pressure at 70 °C not exceeding 3.1 MPa (31 bar) and a |
|
|
relative density at 50 °C not lower than 0.440 kg/l; |
|
|
NOTE 1: In the case of the foregoing mixtures, the use of the following names |
|
|
customary in the trade is permitted for describing these substances: for mixtures A, A01, |
|
|
A02 and A0: BUTANE; for mixture C: PROPANE. |
|
|
NOTE 2: UN No. 1075 PETROLEUM GASES, LIQUEFIED may be used as an |
|
|
alternative entry for UN No. 1965 HYDROCARBON GAS MIXTURE LIQUEFIED, |
|
|
N.O.S. for carriage prior to or following maritime or air carriage. |
|
3354 |
INSECTICIDE GAS, FLAMMABLE, N.O.S. |
|
3161 |
LIQUEFIED GAS, FLAMMABLE, N.O.S. |
2T |
1967 |
INSECTICIDE GAS, TOXIC, N.O.S. |
|
3162 |
LIQUEFIED GAS, TOXIC, N.O.S. |
2TF |
3355 |
INSECTICIDE GAS, TOXIC, FLAMMABLE, N.O.S. |
|
3160 |
LIQUEFIED GAS, TOXIC, FLAMMABLE, N.O.S. |
2TC |
3308 |
LIQUEFIED GAS, TOXIC, CORROSIVE, N.O.S. |
2TO |
3307 |
LIQUEFIED GAS, TOXIC, OXIDIZING, N.O.S. |
2TFC |
3309 |
LIQUEFIED GAS, TOXIC, FLAMMABLE, CORROSIVE, N.O.S. |
2TOC |
3310 |
LIQUEFIED GAS, TOXIC, OXIDIZING, CORROSIVE, N.O.S. |
Refrigerated liquefied gases |
||
Classification code |
UN No. |
Name of the substance or article |
3A |
3158 |
GAS, REFRIGERATED LIQUID, N.O.S. |
3O |
3311 |
GAS, REFRIGERATED LIQUID, OXIDIZING, N.O.S. |
3F |
3312 |
GAS, REFRIGERATED LIQUID, FLAMMABLE, N.O.S. |
Dissolved gases |
|
Classification code |
UN Name of the substance or article No. |
4 |
Only substances listed in Table A of Chapter 3.2 are to be accepted for carriage. |
Aerosols and receptacles, small, containing gas |
|
Classification code |
UN Name of the substance or article No. |
5 |
1950 AEROSOLS 2037 RECEPTACLES, SMALL CONTAINING GAS (GAS CARTRIDGES) without a release device, non-refillable |
Other articles containing gas under pressure |
||
Classification code |
UN No. |
Name of the substance or article |
6A |
2857 |
REFRIGERATING MACHINES containing non-flammable, non-toxic gases or ammonia solutions (UN 2672) ARTICLES, PRESSURIZED, PNEUMATIC (containing non-flammable gas) or ARTICLES, PRESSURIZED, HYDRAULIC (containing non-flammable gas) ARTICLES CONTAINING NON-FLAMMABLE, NON TOXIC GAS, N.O.S. |
|
3164 |
|
|
3164 |
|
|
3538 |
|
6F |
3150 |
DEVICES, SMALL, HYDROCARBON GAS POWERED or |
|
3150 |
HYDROCARBON GAS REFILLS FOR SMALL DEVICES, with release device |
|
3478 |
FUEL CELL CARTRIDGES, containing liquefied flammable gas or |
|
3478 |
FUEL CELL CARTRIDGES CONTAINED IN EQUIPMENT, containing liquefied |
|
|
flammable gas or |
|
3478 |
FUEL CELL CARTRIDGES PACKED WITH EQUIPMENT, containing liquefied |
|
|
flammable gas |
|
3479 |
FUEL CELL CARTRIDGES, containing hydrogen in metal hydride or |
|
3479 |
FUEL CELL CARTRIDGES CONTAINED IN EQUIPMENT, containing hydrogen in |
|
|
metal hydride or |
|
3479 |
FUEL CELL CARTRIDGES PACKED WITH EQUIPMENT, containing hydrogen in |
|
|
metal hydride |
|
3529 |
ENGINE, INTERNAL COMBUSTION, FLAMMABLE GAS POWERED or |
|
3529 |
ENGINE, FUEL CELL, FLAMMABLE GAS POWERED or |
|
3529 |
MACHINERY, INTERNAL COMBUSTION, FLAMMABLE GAS POWERED or |
|
3529 |
MACHINERY, FUEL CELL, FLAMMABLE GAS POWERED |
|
3537 |
ARTICLES CONTAINING FLAMMABLE GAS, N.O.S. |
6T |
3539 |
ARTICLES CONTAINING TOXIC GAS, N.O.S. |
Gas samples |
||
Classification code |
UN No. |
Name of the substance or article |
7F |
3167 |
GAS SAMPLE, NON-PRESSURIZED, FLAMMABLE, N.O.S., not refrigerated liquid |
7T |
3169 |
GAS SAMPLE, NON-PRESSURIZED, TOXIC, N.O.S., not refrigerated liquid |
7TF |
3168 |
GAS SAMPLE, NON-PRESSURIZED, TOXIC, FLAMMABLE, N.O.S., not refrigerated liquid |
Chemicals under pressure |
|
Classification code |
UN Name of the substance or article No. |
8A |
3500 CHEMICAL UNDER PRESSURE, N.O.S. |
8F |
3501 CHEMICAL UNDER PRESSURE, FLAMMABLE, N.O.S. |
8T |
3502 CHEMICAL UNDER PRESSURE, TOXIC, N.O.S. |
8C |
3503 CHEMICAL UNDER PRESSURE, CORROSIVE, N.O.S. |
8TF |
3504 CHEMICAL UNDER PRESSURE, FLAMMABLE, TOXIC, N.O.S. |
8FC |
3505 CHEMICAL UNDER PRESSURE, FLAMMABLE, CORROSIVE, N.O.S. |
Adsorbed gases |
|
Classification code |
UN Name of the substance or article No. |
9A |
3511 ADSORBED GAS, N.O.S. |
9O |
3513 ADSORBED GAS, OXIDIZING, N.O.S. |
9F |
3510 ADSORBED GAS, FLAMMABLE, N.O.S. |
9T |
3512 ADSORBED GAS, TOXIC, N.O.S. |
9TF |
3514 ADSORBED GAS, TOXIC, FLAMMABLE, N.O.S. |
9TC |
3516 ADSORBED GAS, TOXIC, CORROSIVE, N.O.S. |
9TO |
3515 ADSORBED GAS, TOXIC, OXIDIZING, N.O.S. |
9TFC |
3517 ADSORBED GAS, TOXIC, FLAMMABLE, CORROSIVE, N.O.S. |
9TOC |
3518 ADSORBED GAS, TOXIC, OXIDIZING, CORROSIVE, N.O.S. |