Appropriate measures shall be taken to ensure that there is no dangerous build up of pressure.
In the case of damaged, defective, leaking or non-conforming pressure receptacles, salvage pressure receptacles according to 6.2.3.11 may be used.
NOTE: A salvage pressure receptacle may be used as an overpack in accordance with 5.1.2. When used as an overpack, marks shall be in accordance with 5.1.2.1 instead of 5.2.1.3.
Pressure receptacles shall be placed in salvage pressure receptacles of suitable size. The maximum size of the placed pressure receptacle is limited to a water capacity of 1 000 litres. More than one pressure receptacle may be placed in the same salvage pressure receptacle only if the contents are known and do not react dangerously with each other (see 4.1.1.6). In this case the total sum of water capacities of the placed pressure receptacles shall not exceed 1 000 litres. Appropriate measures shall be taken to prevent movement of the pressure receptacles within the salvage pressure receptacle e.g. by partitioning, securing or cushioning.
A pressure receptacle may only be placed in a salvage pressure receptacle if:
(a) The salvage pressure receptacle is in accordance with 6.2.3.11 and a copy of the approval certificate is available;
(b) Parts of the salvage pressure receptacle which are, or are likely to be in direct contact with the dangerous goods will not be affected or weakened by those dangerous goods and will not cause a dangerous effect (e.g. catalyzing reaction or reacting with the dangerous goods); and
(c) The contents of the contained pressure receptacle(s) are limited in pressure and volume so that if totally discharged into the salvage pressure receptacle, the pressure in the salvage pressure receptacle at 65 °C will not exceed the test pressure of the salvage pressure receptacle (for gases, see packing instruction in P200 (3) in 4.1.4.1). The reduction of the useable water capacity of the salvage pressure receptacle, e.g. by any contained equipment and cushioning, shall be taken into account.
The proper shipping name, the UN number preceded by the letters "UN" and label(s) as required for packages in Chapter 5.2 applicable to the dangerous goods inside the contained pressure receptacle(s) shall be applied to the salvage pressure receptacle for carriage.
Salvage pressure receptacles shall be cleaned, purged and visually inspected internally and externally after each use. They shall be periodically inspected and tested in accordance with 6.2.3.5 at least once every five years.
For polyethylene packagings as specified in 6.1.5.2.6, and for polyethylene IBCs as specified in 6.5.6.3.5, the chemical compatibility with filling substances may be verified by assimilation to standard liquids following the procedures, as set out in 4.1.1.21.3 to 4.1.1.21.5 and using the list in table 4.1.1.21.6, provided that the particular design types have been tested with these standard liquids in accordance with 6.1.5 or 6.5.6, taking into account 6.1.6 and that the conditions in 4.1.1.21.2 are met. When assimilation in accordance with this sub-section is not possible, the chemical compatibility needs to be verified by design type testing in accordance with 6.1.5.2.5 or by laboratory tests in accordance with 6.1.5.2.7 for packagings, and in accordance with 6.5.6.3.3 or 6.5.6.3.6 for IBCs, respectively.
NOTE: Irrespective of the provisions of this sub-section, the use of packagings, including IBCs, for a specific filling substance is subject to the limitations of Table A of Chapter 3.2, and the packing instructions in Chapter 4.1.
The relative densities of the filling substances shall not exceed that used to determine the height for the drop test performed successfully according to 6.1.5.3.5 or 6.5.6.9.4 and the mass for the stacking test performed successfully according to 6.1.5.6 or where necessary according to 6.5.6.6 with the assimilated standard liquid(s). The vapour pressures of the filling substances at 50 °C or 55 °C shall not exceed that used to determine the pressure for the internal pressure (hydraulic) test performed successfully according to 6.1.5.5.4 or 6.5.6.8.4.2 with the assimilated standard liquid(s). In case that filling substances are assimilated to a combination of standard liquids, the corresponding values of the filling substances shall not exceed the minimum values derived from the applied drop heights, stacking masses and internal test pressures.
Example: UN 1736 Benzoyl chloride is assimilated to the combination of standard liquids "Mixture of hydrocarbons and wetting solution". It has a vapour pressure of 0.34 kPa at 50 °C and a relative density of approximately 1.2. Design type tests for plastics drums and jerricans were frequently performed at minimum required test levels. In practice this means that the stacking test is commonly performed with stacking loads considering only a relative density of 1.0 for the "Mixture of hydrocarbons" and a relative density of 1.2 for the "Wetting solution" (see definition of standard liquids in 6.1.6). As a consequence chemical compatibility of such tested design types would not be verified for benzoyl chloride by reason of the inadequate test level of the design type with the standard liquid "mixture of hydrocarbons". (Due to the fact that in the majority of cases the applied internal hydraulic test pressure is not less than 100 kPa, the vapour pressure of benzoyl chloride would be covered by such test level according to 4.1.1.10).
All components of a filling substance, which may be a solution, mixture or preparation, such as wetting agents in detergents and disinfectants, irrespective whether dangerous or non-dangerous, shall be included in the assimilation procedure.
The following steps shall be taken to assign filling substances to listed substances or groups of substances in table 4.1.1.21.6 (see also scheme in Figure 4.1.1.21.1):
(a) Classify the filling substance in accordance with the procedures and criteria of Part 2 (determination of the UN number and packing group);
(b) If it is included there, go to the UN number in column (1) of table 4.1.1.21.6;
(c) Select the line that corresponds in terms of packing group, concentration, flashpoint, the presence of non-dangerous components etc. by means of the information given in columns (2a), (2b) and (4), if there is more than one entry for this UN number.
If this is not possible, the chemical compatibility shall be verified in accordance with 6.1.5.2.5 or 6.1.5.2.7 for packagings, and in accordance with 6.5.6.3.3 or 6.5.6.3.6 for IBCs (however, in the case of aqueous solutions, see 4.1.1.21.4);
(d) If the UN number and packing group of the filling substance determined in accordance with (a) is not included in the assimilation list, the chemical compatibility shall be proved in accordance with 6.1.5.2.5 or 6.1.5.2.7 for packagings, and in accordance with 6.5.6.3.3 or 6.5.6.3.6 for IBCs;
(e) Apply the "Rule for collective entries", as described in 4.1.1.21.5, if this is indicated in column (5) of the selected line;
(f) The chemical compatibility of the filling substance may be regarded as verified taking into account 4.1.1.21.1 and 4.1.1.21.2, if a standard liquid or a combination of standard liquids is assimilated in column (5) and the design type is approved for that/those standard liquid(s).
Figure 4.1.1.21.1: Scheme for the assimilation of filling substances to standard liquids
Aqueous solutions of substances and groups of substances assimilated to specific standard liquid(s) in accordance with 4.1.1.21.3 may also be assimilated to that (those) standard liquid(s) provided the following conditions are met:
(a) the aqueous solution can be assigned to the same UN number as the listed substance in accordance with the criteria of 2.1.3.3, and
(b) the aqueous solution is not specifically mentioned by name otherwise in the assimilation list in 4.1.1.21.6, and
(c) no chemical reaction is taking place between the dangerous substance and the solvent water.
Example: Aqueous solutions of UN 1120 tert-Butanol:
- Pure tert-Butanol itself is assigned to the standard liquid "acetic acid" in the assimilation list.
- Aqueous solutions of tert-Butanol can be classified under the entry UN 1120 BUTANOLS in accordance with 2.1.3.3, because the aqueous solution of tert-Butanol does not differ from the entries of the pure substances relating to the class, the packing group(s) and the physical state. Furthermore, the entry "1120 BUTANOLS" is not explicitly limited to the pure substances, and aqueous solutions of these substances are not specifically mentioned by name otherwise in Table A of chapter 3.2 as well as in the assimilation list.
- UN 1120 BUTANOLS do not react with water under normal conditions of carriage.
As a consequence, aqueous solutions of UN 1120 tert-Butanol may be assigned to the standard liquid "acetic acid".
For the assimilation of filling substances for which "Rule for collective entries" is indicated in column (5), the following steps shall be taken and conditions be met (see also scheme in Figure 4.1.1.21.2):
(a) Perform the assimilation procedure for each dangerous component of the solution, mixture or preparation in accordance with 4.1.1.21.3 taking into account the conditions in 4.1.1.21.2. In the case of generic entries, components may be neglected, that are known to have no damaging effect on high density polyethylene (e.g. solid pigments in UN 1263 PAINT or PAINT RELATED MATERIAL);
(b) A solution, mixture or preparation cannot be assimilated to a standard liquid, if:
(i) the UN number and packing group of one or more of the dangerous components does not appear in the assimilation list; or
(ii) "Rule for collective entries" is indicated in column (5) of the assimilation list for one or more of the components; or
(iii) (with the exception of UN 2059 NITROCELLULOSE SOLUTION, FLAMMABLE) the classification code of one or more of its dangerous components differs from that of the solution, mixture or preparation.
(c) If all dangerous components are listed in the assimilation list, and its classification codes are in accordance with the classification code of the solution, mixture or preparation itself, and all dangerous components are assimilated to the same standard liquid or combination of standard liquids in column (5), the chemical compatibility of the solution, mixture or preparation may be regarded as verified taking into account 4.1.1.21.1 and 4.1.1.21.2;
If all dangerous components are listed in the assimilation list and its classification codes are in accordance with the classification code of the solution, mixture or preparation itself, but different standard liquids are indicated in column (5), the chemical compatibility may only
be regarded as verified for the following combinations of standard liquids taking into account 4.1.1.21.1 and 4.1.1.21.2:
(i) water/nitric acid 55%; with the exception of inorganic acids with the classification code C1, which are assigned to standard liquid "water";
(ii) water/wetting solution;
(iii) water/acetic acid;
(iv) water/mixture of hydrocarbons;
(v) water/n-butyl acetate – n-butyl acetate-saturated wetting solution;
(e) In the scope of this rule, chemical compatibility is not regarded as verified for other combinations of standard liquids than those specified in (d) and for all cases specified in (b). In such cases the chemical compatibility shall be verified by other means (see 4.1.1.21.3 (d)).
Example 1: Mixture of UN 1940 THIOGLYCOLIC ACID (50%) and UN 2531 METHACRYLIC
ACID, STABILIZED (50%); classification of the mixture: UN 3265 CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
- Both the UN numbers of the components and the UN number of the mixture are included in the assimilation list;
- Both the components and the mixture have the same classification code: C3;
- UN 1940 THIOGLYCOLIC ACID is assimilated to standard liquid "acetic acid", and UN 2531 METHACRYLIC ACID, STABILIZED is assimilated to standard liquid "n-butyl acetate/n-butyl acetate-saturated wetting solution". According to paragraph (d) this is not an acceptable combination of standard liquids. The chemical compatibility of the mixture has to be verified by other means.
Example 2: Mixture of UN 1793 ISOPROPYL ACID PHOSPHATE (50%) and UN 1803 PHENOLSULPHONIC ACID, LIQUID (50%); classification of the mixture: UN 3265 CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
- Both the UN numbers of the components and the UN number of the mixture are included in the assimilation list;
- Both the components and the mixture have the same classification code: C3;
- UN 1793 ISOPROPYL ACID PHOSPHATE is assimilated to standard liquid "wetting solution", and UN 1803 PHENOLSULPHONIC ACID, LIQUID is assimilated to standard liquid "water". According to paragraph (d) this is one of the acceptable combinations of standard liquids. As a consequence the chemical compatibility may be regarded as verified for this mixture, provided the packaging design type is approved for the standard liquids "wetting solution" and "water".
Figure 4.1.1.21.2: Scheme "Rules for collective entries"
Acceptable combinations of standard liquids:
- water/nitric acid (55%), with the exception of inorganic acids of classification code C1 which are assigned to standard liquid "water";
- water/wetting solution;
- water/acetic acid;
- water/mixture of hydrocarbons;
- water/n-butyl acetate
– n-butyl acetate saturated wetting solution
In the following table (assimilation list) dangerous substances are listed in the numerical order of their UN numbers. As a rule, each line deals with a dangerous substance, single entry or collective entry covered by a specific UN number. However, several consecutive lines may be used for the same UN number, if substances belonging to the same UN number have different names (e.g. individual isomers of a group of substances), different chemical properties, different physical properties and/or different transport conditions. In such cases the single entry or collective entry within the particular packing group is the last one of such consecutive lines.
Columns (1) to (4) of table 4.1.1.21.6, following a structure similar to that of Table A of Chapter 3.2, are used to identify the substance for the purpose of this sub-section. The last column indicates the standard liquid(s) to which the substance can be assimilated.
Explanatory notes for each column:
Column (1) UN No.
Contains the UN number:
of the dangerous substance, if the substance has been assigned its own specific UN number, or
of the collective entry to which dangerous substances not listed by name have been assigned in accordance with the criteria ("decision trees") of Part 2.
Column (2a) Proper shipping name or technical name
Contains the name of the substance, the name of the single entry, which may cover various isomers, or the name of the collective entry itself.
The indicated name can deviate from the applicable proper shipping name.
Column (2b) Description
Contains a descriptive text to clarify the scope of the entry in those cases when the classification, the transport conditions and/or the chemical compatibility of the substance may be variable.
Column (3a) Class
Contains the number of the class, whose heading covers the dangerous substance. This class number is assigned in accordance with the procedures and criteria of Part 2.
Column (3b) Classification code
Contains the classification code of the dangerous substance in accordance with the procedures and criteria of Part 2.
Column (4) Packing group
Contains the packing group number(s) (I, II or III) assigned to the dangerous substance in accordance with the procedures and criteria of Part 2. Certain substances are not assigned to packing groups.
Column (5) Standard liquid
This column indicates, as definite information, either a standard liquid or a combination of standard liquids to which the substance can be assimilated, or a reference to the rule for collective entries in 4.1.1.21.5.
Table 4.1.1.21.6: Assimilation list
UN No. |
Proper shipping name or technical name |
Description |
Class |
Classifi- cation Code |
Packing group |
Standard liquid |
3.1.2 |
3.1.2 |
2.2 |
2.2 |
2.1.1.3 |
||
(1) |
(2a) |
(2b) |
(3a) |
(3b) |
(4) |
(5) |
1090 |
Acetone |
3 |
F1 |
II |
Mixture of hydrocarbons Remark: applicable only, if it is proved that the permeability of the substance out of the package intended for carriage has an acceptable level |
|
1093 |
Acrylonitrile, stabilized |
3 |
FT1 |
I |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
1104 |
Amyl acetates |
pure isomers and isomeric mixture |
3 |
F1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
1105 |
Pentanols |
pure isomers and isomeric mixture |
3 |
F1 |
II/III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
1106 |
Amylamines |
pure isomers and isomeric mixture |
3 |
FC |
II/III |
Mixture of hydrocarbons and wetting solution |
1109 |
Amyl formates |
pure isomers and isomeric mixture |
3 |
F1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
1120 |
Butanols |
pure isomers and isomeric mixture |
3 |
F1 |
II/III |
Acetic acid |
1123 |
Butyl acetates |
pure isomers and isomeric mixture |
3 |
F1 |
II/III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
1125 |
n-Butylamine |
3 |
FC |
II |
Mixture of hydrocarbons and wetting solution |
|
1128 |
n-Butyl formate |
3 |
F1 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
1129 |
Butyraldehyde |
3 |
F1 |
II |
Mixture of hydrocarbons |
|
1133 |
Adhesives |
containing flammable liquid |
3 |
F1 |
I/II/III |
Rule for collective entries |
1139 |
Coating solution |
includes surface treatments or coatings used for industrial or other purposes such as vehicle under coating, drum or barrel lining |
3 |
F1 |
I/II/III |
Rule for collective entries |
1145 |
Cyclohexane |
3 |
F1 |
II |
Mixture of hydrocarbons |
|
1146 |
Cyclopentane |
3 |
F1 |
II |
Mixture of hydrocarbons |
|
1153 |
Ethylene glycol diethyl ether |
3 |
F1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution and mixture of hydrocarbons |
|
1154 |
Diethylamine |
3 |
FC |
II |
Mixture of hydrocarbons and wetting solution |
|
1158 |
Diisopropylamine |
3 |
FC |
II |
Mixture of hydrocarbons and wetting solution |
UN No. |
Proper shipping name or technical name |
Description |
Class |
Classifi- cation Code |
Packing group |
Standard liquid |
3.1.2 |
3.1.2 |
2.2 |
2.2 |
2.1.1.3 |
||
(1) |
(2a) |
(2b) |
(3a) |
(3b) |
(4) |
(5) |
1160 |
Dimethylamine aqueous solution |
3 |
FC |
II |
Mixture of hydrocarbons and wetting solution |
|
1165 |
Dioxane |
3 |
F1 |
II |
Mixture of hydrocarbons |
|
1169 |
Extracts, aromatic, liquid |
3 |
F1 |
II/III |
Rule for collective entries |
|
1170 |
Ethanol or Ethanol solution |
aqueous solution |
3 |
F1 |
II/III |
Acetic acid |
1171 |
Ethylene glycol monoethyl ether |
3 |
F1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution and mixture of hydrocarbons |
|
1172 |
Ethylene glycol monoethyl ether acetate |
3 |
F1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution and mixture of hydrocarbons |
|
1173 |
Ethyl acetate |
3 |
F1 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
1177 |
2-Ethylbutyl acetate |
3 |
F1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
1178 |
2-Ethylbutyraldehyde |
3 |
F1 |
II |
Mixture of hydrocarbons |
|
1180 |
Ethyl butyrate |
3 |
F1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
1188 |
Ethylene glycol monomethyl ether |
3 |
F1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution and mixture of hydrocarbons |
|
1189 |
Ethylene glycol monomethyl ether acetate |
3 |
F1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution and mixture of hydrocarbons |
|
1190 |
Ethyl formate |
3 |
F1 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
1191 |
Octyl aldehydes |
pure isomers and isomeric mixture |
3 |
F1 |
III |
Mixture of hydrocarbons |
1192 |
Ethyl lactate |
3 |
F1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
1195 |
Ethyl propionate |
3 |
F1 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
1197 |
Extracts, flavouring, liquid |
3 |
F1 |
II/III |
Rule for collective entries |
|
1198 |
Formaldehyde solution, flammable |
aqueous solution, flashpoint between 23 °C and 60 °C |
3 |
FC |
III |
Acetic acid |
1202 |
Diesel fuel |
complying with EN 590:2013 + A1:2017 or with a flashpoint not more than 100 °C |
3 |
F1 |
III |
Mixture of hydrocarbons |
UN No. |
Proper shipping name or technical name |
Description |
Class |
Classifi- cation Code |
Packing group |
Standard liquid |
3.1.2 |
3.1.2 |
2.2 |
2.2 |
2.1.1.3 |
||
(1) |
(2a) |
(2b) |
(3a) |
(3b) |
(4) |
(5) |
1202 |
Gas oil |
flashpoint not more than 100 °C |
3 |
F1 |
III |
Mixture of hydrocarbons |
1202 |
Heating oil, light |
extra light |
3 |
F1 |
III |
Mixture of hydrocarbons |
1202 |
Heating oil, light |
complying with EN 590:2013 + AC:2014 or with a flashpoint not more than 100 °C |
3 |
F1 |
III |
Mixture of hydrocarbons |
1203 |
Motor spirit, or gasoline, or petrol |
3 |
F1 |
II |
Mixture of hydrocarbons |
|
1206 |
Heptanes |
pure isomers and isomeric mixture |
3 |
F1 |
II |
Mixture of hydrocarbons |
1207 |
Hexaldehyde |
n-Hexaldehyde |
3 |
F1 |
III |
Mixture of hydrocarbons |
1208 |
Hexanes |
pure isomers and isomeric mixture |
3 |
F1 |
II |
Mixture of hydrocarbons |
1210 |
Printing ink or Printing ink related material |
flammable, including printing ink thinning or reducing compound |
3 |
F1 |
I/II/III |
Rule for collective entries |
1212 |
Isobutanol |
3 |
F1 |
III |
Acetic acid |
|
1213 |
Isobutyl acetate |
3 |
F1 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
1214 |
Isobutylamine |
3 |
FC |
II |
Mixture of hydrocarbons and wetting solution |
|
1216 |
Isooctenes |
pure isomers and isomeric mixture |
3 |
F1 |
II |
Mixture of hydrocarbons |
1219 |
Isopropanol |
3 |
F1 |
II |
Acetic acid |
|
1220 |
Isopropyl acetate |
3 |
F1 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
1221 |
Isopropylamine |
3 |
FC |
I |
Mixture of hydrocarbons and wetting solution |
|
1223 |
Kerosene |
3 |
F1 |
III |
Mixture of hydrocarbons |
|
1224 |
3,3-Dimethyl-2-butanone |
3 |
F1 |
II |
Mixture of hydrocarbons |
|
1224 |
Ketones, liquid, n.o.s. |
3 |
F1 |
II/III |
Rule for collective entries |
|
1230 |
Methanol |
3 |
FT1 |
II |
Acetic acid |
|
1231 |
Methyl acetate |
3 |
F1 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
1233 |
Methylamyl acetate |
3 |
F1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
1235 |
Methylamine, aqueous solution |
3 |
FC |
II |
Mixture of hydrocarbons and wetting solution |
|
1237 |
Methyl butyrate |
3 |
F1 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
1247 |
Methyl methacrylate monomer, stabilized |
3 |
F1 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
UN No. |
Proper shipping name or technical name |
Description |
Class |
Classifi- cation Code |
Packing group |
Standard liquid |
3.1.2 |
3.1.2 |
2.2 |
2.2 |
2.1.1.3 |
||
(1) |
(2a) |
(2b) |
(3a) |
(3b) |
(4) |
(5) |
1248 |
Methyl propionate |
3 |
F1 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
1262 |
Octanes |
pure isomers and isomeric mixture |
3 |
F1 |
II |
Mixture of hydrocarbons |
1263 |
Paint or Paint related material |
including paint, lacquer, enamel, stain, shellac, varnish, polish, liquid filler and liquid lacquer base or including paint thinning and reducing compound |
3 |
F1 |
I/II/III |
Rule for collective entries |
1265 |
Pentanes |
n-Pentane |
3 |
F1 |
II |
Mixture of hydrocarbons |
1266 |
Perfumery products |
with flammable solvents |
3 |
F1 |
II/III |
Rule for collective entries |
1268 |
Coal tar naphtha |
vapour pressure at 50 °C not more than 110 kPa |
3 |
F1 |
II |
Mixture of hydrocarbons |
1268 |
Petroleum distillates, n.o.s. or Petroleum products, n.o.s. |
3 |
F1 |
I/II/III |
Rule for collective entries |
|
1274 |
n-Propanol |
3 |
F1 |
II/III |
Acetic acid |
|
1275 |
Propionaldehyde |
3 |
F1 |
II |
Mixture of hydrocarbons |
|
1276 |
n-Propyl acetate |
3 |
F1 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
1277 |
Propylamine |
n-Propylamine |
3 |
FC |
II |
Mixture of hydrocarbons and wetting solution |
1281 |
Propyl formates |
pure isomers and isomeric mixture |
3 |
F1 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
1282 |
Pyridine |
3 |
F1 |
II |
Mixture of hydrocarbons |
|
1286 |
Rosin oil |
3 |
F1 |
II/III |
Rule for collective entries |
|
1287 |
Rubber solution |
3 |
F1 |
II/III |
Rule for collective entries |
|
1296 |
Triethylamine |
3 |
FC |
II |
Mixture of hydrocarbons and wetting solution |
|
1297 |
Trimethylamine, aqueous solution |
not more than 50% trimethylamine, by mass |
3 |
FC |
I/II/III |
Mixture of hydrocarbons and wetting solution |
1301 |
Vinyl acetate, stabilized |
3 |
F1 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
1306 |
Wood preservatives, liquid |
3 |
F1 |
II/III |
Rule for collective entries |
|
1547 |
Aniline |
6.1 |
T1 |
II |
Acetic acid |
|
1590 |
Dichloroanilines, liquid |
pure isomers and isomeric mixture |
6.1 |
T1 |
II |
Acetic acid |
1602 |
Dye, liquid, toxic, n.o.s. or Dye intermediate, liquid, toxic, n.o.s. |
6.1 |
T1 |
I/II/III |
Rule for collective entries |
|
1604 |
Ethylenediamine |
8 |
CF1 |
II |
Mixture of hydrocarbons and wetting solution |
UN No. |
Proper shipping name or technical name |
Description |
Class |
Classifi- cation Code |
Packing group |
Standard liquid |
3.1.2 |
3.1.2 |
2.2 |
2.2 |
2.1.1.3 |
||
(1) |
(2a) |
(2b) |
(3a) |
(3b) |
(4) |
(5) |
1715 |
Acetic anhydride |
8 |
CF1 |
II |
Acetic acid |
|
1717 |
Acetyl chloride |
3 |
FC |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
1718 |
Butyl acid phosphate |
8 |
C3 |
III |
Wetting solution |
|
1719 |
Hydrogen sulphide |
aqueous solution |
8 |
C5 |
III |
Acetic acid |
1719 |
Caustic alkali liquid, n.o.s. |
inorganic |
8 |
C5 |
II/III |
Rule for collective entries |
1730 |
Antimony pentachloride, liquid |
pure |
8 |
C1 |
II |
Water |
1736 |
Benzoyl chloride |
8 |
C3 |
II |
Mixture of hydrocarbons and wetting solution |
|
1750 |
Chloroacetic acid solution |
aqueous solution |
6.1 |
TC1 |
II |
Acetic acid |
1750 |
Chloroacetic acid solution |
mixtures of mono- and dichloroacetic acid |
6.1 |
TC1 |
II |
Acetic acid |
1752 |
Chloroacetyl chloride |
6.1 |
TC1 |
I |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
1755 |
Chromic acid solution |
aqueous solution with not more than 30% chromic acid |
8 |
C1 |
II/III |
Nitric acid |
1760 |
Cyanamide |
aqueous solution with not more than 50% cyanamide |
8 |
C9 |
II |
Water |
1760 |
O,O-Diethyl- dithiophosphoric acid |
8 |
C9 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
1760 |
O,O-Diisopropyl- dithiophosphoric acid |
8 |
C9 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
1760 |
O,O-Di-n-propyl- dithiophosphoric acid |
8 |
C9 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
1760 |
Corrosive liquid, n.o.s. |
flashpoint more than 60 °C |
8 |
C9 |
I/II/III |
Rule for collective entries |
1761 |
Cupriethylenediamine solution |
aqueous solution |
8 |
CT1 |
II/III |
Mixture of hydrocarbons and wetting solution |
1764 |
Dichloroacetic acid |
8 |
C3 |
II |
Acetic acid |
|
1775 |
Fluoroboric acid |
aqueous solution with not more than 50% fluoroboric acid |
8 |
C1 |
II |
Water |
1778 |
Fluorosilicic acid |
8 |
C1 |
II |
Water |
|
1779 |
Formic acid |
with more than 85% acid by mass |
8 |
C3 |
II |
Acetic acid |
1783 |
Hexamethylenediamine solution |
aqueous solution |
8 |
C7 |
II/III |
Mixture of hydrocarbons and wetting solution |
1787 |
Hydriodic acid |
aqueous solution |
8 |
C1 |
II/III |
Water |
1788 |
Hydrobromic acid |
aqueous solution |
8 |
C1 |
II/III |
Water |
1789 |
Hydrochloric acid |
not more than 38% aqueous solution |
8 |
C1 |
II/III |
Water |
1790 |
Hydrofluoric acid |
with not more than 60% hydrofluoric acid |
8 |
CT1 |
II |
Water the permissible period of use: not more than 2 years |
1791 |
Hypochlorite solution |
aqueous solution, containing wetting agents as customary in trade |
8 |
C9 |
II/III |
Nitric acid and wetting solution * |
UN No. |
Proper shipping name or technical name |
Description |
Class |
Classifi- cation Code |
Packing group |
Standard liquid |
3.1.2 |
3.1.2 |
2.2 |
2.2 |
2.1.1.3 |
||
(1) |
(2a) |
(2b) |
(3a) |
(3b) |
(4) |
(5) |
1791 |
Hypochlorite solution |
aqueous solution |
8 |
C9 |
II/III |
Nitric acid * |
* For UN 1791: Test to be carried out only with vent. If the test is carried out with nitric acid as the standard liquid, an acid-resistant vent and gasket shall be used. If the test is carried out with hypochlorite solutions themselves, vents and gaskets of the same design type, resistant to hypochlorite (e.g. of silicone rubber) but not resistant to nitric acid, are also permitted. |
||||||
1793 |
Isopropyl acid phosphate |
8 |
C3 |
III |
Wetting solution |
|
1802 |
Perchloric acid |
aqueous solution with not more than 50% acid, by mass |
8 |
CO1 |
II |
Water |
1803 |
Phenolsulphonic acid, liquid |
isomeric mixture |
8 |
C3 |
II |
Water |
1805 |
Phosphoric acid, solution |
8 |
C1 |
III |
Water |
|
1814 |
Potassium hydroxide solution |
aqueous solution |
8 |
C5 |
II/III |
Water |
1824 |
Sodium hydroxide solution |
aqueous solution |
8 |
C5 |
II/III |
Water |
1830 |
Sulphuric acid |
with more than 51% pure acid |
8 |
C1 |
II |
Water |
1832 |
Sulphuric acid, spent |
chemical stable |
8 |
C1 |
II |
Water |
1833 |
Sulphurous acid |
8 |
C1 |
II |
Water |
|
1835 |
Tetramethylammonium hydroxide, solution |
aqueous solution, flashpoint more than 60 °C |
8 |
C7 |
II |
Water |
1840 |
Zinc chloride solution |
aqueous solution |
8 |
C1 |
III |
Water |
1848 |
Propionic acid |
with not less than 10% and less than 90% acid by mass |
8 |
C3 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
1862 |
Ethyl crotonate |
3 |
F1 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
1863 |
Fuel, aviation, turbine engine |
3 |
F1 |
I/II/III |
Mixture of hydrocarbons |
|
1866 |
Resin solution |
flammable |
3 |
F1 |
I/II/III |
Rule for collective entries |
1902 |
Diisooctyl acid phosphate |
8 |
C3 |
III |
Wetting solution |
|
1906 |
Sludge acid |
8 |
C1 |
II |
Nitric acid |
|
1908 |
Chlorite solution |
aqueous solution |
8 |
C9 |
II/III |
Acetic acid |
1914 |
Butyl propionates |
3 |
F1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
1915 |
Cyclohexanone |
3 |
F1 |
III |
Mixture of hydrocarbons |
|
1917 |
Ethyl acrylate, stabilized |
3 |
F1 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
1919 |
Methyl acrylate, stabilized |
3 |
F1 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
1920 |
Nonanes |
pure isomers and isomeric mixture, flashpoint between 23 °C and 60 °C |
3 |
F1 |
III |
Mixture of hydrocarbons |
1935 |
Cyanide solution, n.o.s. |
inorganic |
6.1 |
T4 |
I/II/III |
Water |
1940 |
Thioglycolic acid |
8 |
C3 |
II |
Acetic acid |
|
1986 |
Alcohols, flammable, toxic, n.o.s. |
3 |
FT1 |
I/II/III |
Rule for collective entries |
|
1987 |
Cyclohexanol |
technical pure |
3 |
F1 |
III |
Acetic acid |
1987 |
Alcohols, n.o.s. |
3 |
F1 |
II/III |
Rule for collective entries |
UN No. |
Proper shipping name or technical name |
Description |
Class |
Classifi- cation Code |
Packing group |
Standard liquid |
3.1.2 |
3.1.2 |
2.2 |
2.2 |
2.1.1.3 |
||
(1) |
(2a) |
(2b) |
(3a) |
(3b) |
(4) |
(5) |
1988 |
Aldehydes, flammable, toxic, n.o.s. |
3 |
FT1 |
I/II/III |
Rule for collective entries |
|
1989 |
Aldehydes, n.o.s. |
3 |
F1 |
I/II/III |
Rule for collective entries |
|
1992 |
2,6-cis-Dimethyl- morpholine |
3 |
FT1 |
III |
Mixture of hydrocarbons |
|
1992 |
Flammable liquid, toxic, n.o.s. |
3 |
FT1 |
I/II/III |
Rule for collective entries |
|
1993 |
Propionic acid vinyl ester |
3 |
F1 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
1993 |
(1-Methoxy-2-propyl) acetate |
3 |
F1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
1993 |
Flammable liquid, n.o.s. |
3 |
F1 |
I/II/III |
Rule for collective entries |
|
2014 |
Hydrogen peroxide, aqueous solution |
with not less than 20% but not more than 60% hydrogen peroxide, stabilized as necessary |
5.1 |
OC1 |
II |
Nitric acid |
2022 |
Cresylic acid |
liquid mixture containing cresols, xylenols and methyl phenols |
6.1 |
TC1 |
II |
Acetic acid |
2030 |
Hydrazine aqueous solution |
with not less than 37% but not more than 64% hydrazine, by mass |
8 |
CT1 |
II |
Water |
2030 |
Hydrazine hydrate |
aqueous solution with 64% hydrazine |
8 |
CT1 |
II |
Water |
2031 |
Nitric acid |
other than red fuming, with not more than 55% pure acid |
8 |
CO1 |
II |
Nitric acid |
2045 |
Isobutyraldehyde |
3 |
F1 |
II |
Mixture of hydrocarbons |
|
2050 |
Diisobutylene isomeric compounds |
3 |
F1 |
II |
Mixture of hydrocarbons |
|
2053 |
Methyl isobutyl carbinol |
3 |
F1 |
III |
Acetic acid |
|
2054 |
Morpholine |
8 |
CF1 |
I |
Mixture of hydrocarbons |
|
2057 |
Tripropylene |
3 |
F1 |
II/III |
Mixture of hydrocarbons |
|
2058 |
Valeraldehyde |
pure isomers and isomeric mixture |
3 |
F1 |
II |
Mixture of hydrocarbons |
2059 |
Nitrocellulose solution, flammable |
3 |
D |
I/II/III |
Rule for collective entries: Deviating from the general procedure this rule may be applied to solvents of classification code F1 |
|
2075 |
Chloral, anhydrous, stabilized |
6.1 |
T1 |
II |
Wetting solution |
|
2076 |
Cresols, liquid |
pure isomers and isomeric mixture |
6.1 |
TC1 |
II |
Acetic acid |
2078 |
Toluene diisocyanate |
liquid |
6.1 |
T1 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
2079 |
Diethylenetriamine |
8 |
C7 |
II |
Mixture of hydrocarbons |
|
2209 |
Formaldehyde solution |
aqueous solution with 37% Form-aldehyde, methanol content: 8-10% |
8 |
C9 |
III |
Acetic acid |
2209 |
Formaldehyde solution |
aqueous solution, with not less than 25% formaldehyde |
8 |
C9 |
III |
Water |
UN No. |
Proper shipping name or technical name |
Description |
Class |
Classifi- cation Code |
Packing group |
Standard liquid |
3.1.2 |
3.1.2 |
2.2 |
2.2 |
2.1.1.3 |
||
(1) |
(2a) |
(2b) |
(3a) |
(3b) |
(4) |
(5) |
2218 |
Acrylic acid, stabilized |
8 |
CF1 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
2227 |
n-Butyl methacrylate, stabilized |
3 |
F1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
2235 |
Chlorobenzyl chlorides, liquid |
para-Chlorobenzyl chloride |
6.1 |
T2 |
III |
Mixture of hydrocarbons |
2241 |
Cycloheptane |
3 |
F1 |
II |
Mixture of hydrocarbons |
|
2242 |
Cycloheptene |
3 |
F1 |
II |
Mixture of hydrocarbons |
|
2243 |
Cyclohexyl acetate |
3 |
F1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
2244 |
Cyclopentanol |
3 |
F1 |
III |
Acetic acid |
|
2245 |
Cyclopentanone |
3 |
F1 |
III |
Mixture of hydrocarbons |
|
2247 |
n-Decane |
3 |
F1 |
III |
Mixture of hydrocarbons |
|
2248 |
Di-n-butylamine |
8 |
CF1 |
II |
Mixture of hydrocarbons |
|
2258 |
1,2-Propylenediamine |
8 |
CF1 |
II |
Mixture of hydrocarbons and wetting solution |
|
2259 |
Triethylenetetramine |
8 |
C7 |
II |
Water |
|
2260 |
Tripropylamine |
3 |
FC |
III |
Mixture of hydrocarbons and wetting solution |
|
2263 |
Dimethylcyclohexanes |
pure isomers and isomeric mixture |
3 |
F1 |
II |
Mixture of hydrocarbons |
2264 |
N,N-Dimethyl- cyclohexylamine |
8 |
CF1 |
II |
Mixture of hydrocarbons and wetting solution |
|
2265 |
N,N-Dimethyl-formamide |
3 |
F1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
2266 |
Dimethyl-N-propylamine |
3 |
FC |
II |
Mixture of hydrocarbons and wetting solution |
|
2269 |
3,3'-Imino-dipropylamine |
8 |
C7 |
III |
Mixture of hydrocarbons and wetting solution |
|
2270 |
Ethylamine, aqueous solution |
with not less than 50% but not more than 70% ethylamine, flashpoint below 23 °C, corrosive or slightly corrosive |
3 |
FC |
II |
Mixture of hydrocarbons and wetting solution |
2275 |
2-Ethylbutanol |
3 |
F1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
2276 |
2-Ethylhexylamine |
3 |
FC |
III |
Mixture of hydrocarbons and wetting solution |
|
2277 |
Ethyl methacrylate, stabilized |
3 |
F1 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
2278 |
n-Heptene |
3 |
F1 |
II |
Mixture of hydrocarbons |
UN No. |
Proper shipping name or technical name |
Description |
Class |
Classifi- cation Code |
Packing group |
Standard liquid |
3.1.2 |
3.1.2 |
2.2 |
2.2 |
2.1.1.3 |
||
(1) |
(2a) |
(2b) |
(3a) |
(3b) |
(4) |
(5) |
2282 |
Hexanols |
pure isomers and isomeric mixture |
3 |
F1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
2283 |
Isobutyl methacrylate, stabilized |
3 |
F1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
2286 |
Pentamethylheptane |
3 |
F1 |
III |
Mixture of hydrocarbons |
|
2287 |
Isoheptenes |
3 |
F1 |
II |
Mixture of hydrocarbons |
|
2288 |
Isohexenes |
3 |
F1 |
II |
Mixture of hydrocarbons |
|
2289 |
Isophoronediamine |
8 |
C7 |
III |
Mixture of hydrocarbons and wetting solution |
|
2293 |
4-Methoxy-4-methyl- pentan-2-one |
3 |
F1 |
III |
Mixture of hydrocarbons |
|
2296 |
Methylcyclohexane |
3 |
F1 |
II |
Mixture of hydrocarbons |
|
2297 |
Methylcyclohexanone |
pure isomers and isomeric mixture |
3 |
F1 |
III |
Mixture of hydrocarbons |
2298 |
Methylcyclopentane |
3 |
F1 |
II |
Mixture of hydrocarbons |
|
2302 |
5-Methylhexan-2-one |
3 |
F1 |
III |
Mixture of hydrocarbons |
|
2308 |
Nitrosylsulphuric acid, liquid |
8 |
C1 |
II |
Water |
|
2309 |
Octadienes |
3 |
F1 |
II |
Mixture of hydrocarbons |
|
2313 |
Picolines |
pure isomers and isomeric mixture |
3 |
F1 |
III |
Mixture of hydrocarbons |
2317 |
Sodium cuprocyanide solution |
aqueous solution |
6.1 |
T4 |
I |
Water |
2320 |
Tetraethylenepentamine |
8 |
C7 |
III |
Mixture of hydrocarbons and wetting solution |
|
2324 |
Triisobutylene |
mixture of C12-mono- olefines, flashpoint between 23 °C and 60 °C |
3 |
F1 |
III |
Mixture of hydrocarbons |
2326 |
Trimethyl- cyclohexylamine |
8 |
C7 |
III |
Mixture of hydrocarbons and wetting solution |
|
2327 |
Trimethylhexamethylene- diamines |
pure isomers and isomeric mixture |
8 |
C7 |
III |
Mixture of hydrocarbons and wetting solution |
2330 |
Undecane |
3 |
F1 |
III |
Mixture of hydrocarbons |
|
2336 |
Allyl formate |
3 |
FT1 |
I |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
2348 |
Butyl acrylates, stabilized |
pure isomers and isomeric mixture |
3 |
F1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
2357 |
Cyclohexylamine |
flashpoint between 23 °C and 60 °C |
8 |
CF1 |
II |
Mixture of hydrocarbons and wetting solution |
2361 |
Diisobutylamine |
3 |
FC |
III |
Mixture of hydrocarbons and wetting solution |
|
2366 |
Diethyl carbonate |
3 |
F1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
UN No. |
Proper shipping name or technical name |
Description |
Class |
Classifi- cation Code |
Packing group |
Standard liquid |
3.1.2 |
3.1.2 |
2.2 |
2.2 |
2.1.1.3 |
||
(1) |
(2a) |
(2b) |
(3a) |
(3b) |
(4) |
(5) |
2367 |
alpha-Methyl- valeraldehyde |
3 |
F1 |
II |
Mixture of hydrocarbons |
|
2370 |
1-Hexene |
3 |
F1 |
II |
Mixture of hydrocarbons |
|
2372 |
1,2-Di-(dimethylamino)- ethane |
3 |
F1 |
II |
Mixture of hydrocarbons and wetting solution |
|
2379 |
1,3-Dimethylbutylamine |
3 |
FC |
II |
Mixture of hydrocarbons and wetting solution |
|
2383 |
Dipropylamine |
3 |
FC |
II |
Mixture of hydrocarbons and wetting solution |
|
2385 |
Ethyl isobutyrate |
3 |
F1 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
2393 |
Isobutyl formate |
3 |
F1 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
2394 |
Isobutyl propionate |
flashpoint between 23 °C and 60 °C |
3 |
F1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
2396 |
Methacrylaldehyde, stabilized |
3 |
FT1 |
II |
Mixture of hydrocarbons |
|
2400 |
Methyl isovalerate |
3 |
F1 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
2401 |
Piperidine |
8 |
CF1 |
I |
Mixture of hydrocarbons and wetting solution |
|
2403 |
Isopropenyl acetate |
3 |
F1 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
2405 |
Isopropyl butyrate |
3 |
F1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
2406 |
Isopropyl isobutyrate |
3 |
F1 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
2409 |
Isopropyl propionate |
3 |
F1 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
2410 |
1,2,3,6-Tetrahydro- pyridine |
3 |
F1 |
II |
Mixture of hydrocarbons |
|
2427 |
Potassium chlorate, aqueous solution |
5.1 |
O1 |
II/III |
Water |
|
2428 |
Sodium chlorate, aqueous solution |
5.1 |
O1 |
II/III |
Water |
|
2429 |
Calcium chlorate, aqueous solution |
5.1 |
O1 |
II/III |
Water |
|
2436 |
Thioacetic acid |
3 |
F1 |
II |
Acetic acid |
|
2457 |
2,3-Dimethylbutane |
3 |
F1 |
II |
Mixture of hydrocarbons |
|
2491 |
Ethanolamine |
8 |
C7 |
III |
Wetting solution |
|
2491 |
Ethanolamine solution |
aqueous solution |
8 |
C7 |
III |
Wetting solution |
UN No. |
Proper shipping name or technical name |
Description |
Class |
Classifi- cation Code |
Packing group |
Standard liquid |
3.1.2 |
3.1.2 |
2.2 |
2.2 |
2.1.1.3 |
||
(1) |
(2a) |
(2b) |
(3a) |
(3b) |
(4) |
(5) |
2496 |
Propionic anhydride |
8 |
C3 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
2524 |
Ethyl orthoformate |
3 |
F1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
2526 |
Furfurylamine |
3 |
FC |
III |
Mixture of hydrocarbons and wetting solution |
|
2527 |
Isobutyl acrylate, stabilized |
3 |
F1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
2528 |
Isobutyl isobutyrate |
3 |
F1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
2529 |
Isobutyric acid |
3 |
FC |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
2531 |
Methacrylic acid, stabilized |
8 |
C3 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
2542 |
Tributylamine |
6.1 |
T1 |
II |
Mixture of hydrocarbons |
|
2560 |
2-Methylpentan-2-ol |
3 |
F1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
2564 |
Trichloroacetic acid solution |
aqueous solution |
8 |
C3 |
II/III |
Acetic acid |
2565 |
Dicyclohexylamine |
8 |
C7 |
III |
Mixture of hydrocarbons and wetting solution |
|
2571 |
Ethylsulphuric acid |
8 |
C3 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
2571 |
Alkylsulphuric acids |
8 |
C3 |
II |
Rule for collective entries |
|
2580 |
Aluminium bromide solution |
aqueous solution |
8 |
C1 |
III |
Water |
2581 |
Aluminium chloride solution |
aqueous solution |
8 |
C1 |
III |
Water |
2582 |
Ferric chloride solution |
aqueous solution |
8 |
C1 |
III |
Water |
2584 |
Methane sulphonic acid |
with more than 5% free sulphuric acid |
8 |
C1 |
II |
Water |
2584 |
Alkylsulphonic acids, liquid |
with more than 5% free sulphuric acid |
8 |
C1 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
2584 |
Benzene sulphonic acid |
with more than 5% free sulphuric acid |
8 |
C1 |
II |
Water |
2584 |
Toluene sulphonic acids |
with more than 5% free sulphuric acid |
8 |
C1 |
II |
Water |
2584 |
Arylsulphonic acids, liquid |
with more than 5% free sulphuric acid |
8 |
C1 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
2586 |
Methane sulfonic acid |
with not more than 5% free sulphuric acid |
8 |
C1 |
III |
Water |
2586 |
Alkylsulphonic acids, liquid |
with not more than 5% free sulphuric acid |
8 |
C1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
UN No. |
Proper shipping name or technical name |
Description |
Class |
Classifi- cation Code |
Packing group |
Standard liquid |
3.1.2 |
3.1.2 |
2.2 |
2.2 |
2.1.1.3 |
||
(1) |
(2a) |
(2b) |
(3a) |
(3b) |
(4) |
(5) |
2586 |
Benzene sulphonic acid |
with not more than 5% free sulphuric acid |
8 |
C1 |
III |
Water |
2586 |
Toluene sulphonic acids |
with not more than 5% free sulphuric acid |
8 |
C1 |
III |
Water |
2586 |
Arylsulphonic acids, liquid |
with not more than 5% free sulphuric acid |
8 |
C1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
2610 |
Triallylamine |
3 |
FC |
III |
Mixture of hydrocarbons and wetting solution |
|
2614 |
Methallyl alcohol |
3 |
F1 |
III |
Acetic acid |
|
2617 |
Methylcyclohexanols |
pure isomers and isomeric mixture, flashpoint between 23 °C and 60 °C |
3 |
F1 |
III |
Acetic acid |
2619 |
Benzyldimethylamine |
8 |
CF1 |
II |
Mixture of hydrocarbons and wetting solution |
|
2620 |
Amyl butyrates |
pure isomers and isomeric mixture, flashpoint between 23 °C and 60 °C |
3 |
F1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
2622 |
Glycidaldehyde |
flashpoint below 23 °C |
3 |
FT1 |
II |
Mixture of hydrocarbons |
2626 |
Chloric acid, aqueous solution |
with not more than 10% chloric acid |
5.1 |
O1 |
II |
Nitric acid |
2656 |
Quinoline |
flashpoint more than 60 °C |
6.1 |
T1 |
III |
Water |
2672 |
Ammonia solution |
relative density between 0.880 and 0.957 at 15 °C in water, with more than 10% but not more than 35% ammonia |
8 |
C5 |
III |
Water |
2683 |
Ammonium sulphide solution |
aqueous solution, flashpoint between 23 °C and 60 °C |
8 |
CFT |
II |
Acetic acid |
2684 |
3-Diethylamino- propylamine |
3 |
FC |
III |
Mixture of hydrocarbons and wetting solution |
|
2685 |
N,N-Diethylethylene- diamine |
8 |
CF1 |
II |
Mixture of hydrocarbons and wetting solution |
|
2693 |
Bisulphites, aqueous solution, n.o.s. |
inorganic |
8 |
C1 |
III |
Water |
2707 |
Dimethyldioxanes |
pure isomers and isomeric mixture |
3 |
F1 |
II/III |
Mixture of hydrocarbons |
2733 |
Amines, flammable, corrosive , n.o.s. or Polyamines, flammable, corrosive, n.o.s. |
3 |
FC |
I/II/III |
Mixture of hydrocarbons and wetting solution |
|
2734 |
Di-sec-butylamine |
8 |
CF1 |
II |
Mixture of hydrocarbons |
|
2734 |
Amines, liquid, corrosive, flammable, n.o.s. or Polyamines, liquid, corrosive, flammable, n.o.s. |
8 |
CF1 |
I/II |
Mixture of hydrocarbons and wetting solution |
UN No. |
Proper shipping name or technical name |
Description |
Class |
Classifi- cation Code |
Packing group |
Standard liquid |
3.1.2 |
3.1.2 |
2.2 |
2.2 |
2.1.1.3 |
||
(1) |
(2a) |
(2b) |
(3a) |
(3b) |
(4) |
(5) |
2735 |
Amines, liquid, corrosive, n.o.s. or Polyamines, liquid, corrosive, n.o.s. |
8 |
C7 |
I/II/III |
Mixture of hydrocarbons and wetting solution |
|
2739 |
Butyric anhydride |
8 |
C3 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
2789 |
Acetic acid, glacial or Acetic acid solution |
aqueous solution, more than 80% acid, by mass |
8 |
CF1 |
II |
Acetic acid |
2790 |
Acetic acid solution |
aqueous solution, more than 10% but not more than 80% acid, by mass |
8 |
C3 |
II/III |
Acetic acid |
2796 |
Sulphuric acid |
with not more than 51% pure acid |
8 |
C1 |
II |
Water |
2797 |
Battery fluid, alkali |
Potassium/Sodium hydroxide, aqueous solution |
8 |
C5 |
II |
Water |
2810 |
2-Chloro-6-fluorobenzyl chloride |
stabilized |
6.1 |
T1 |
III |
Mixture of hydrocarbons |
2810 |
2-Phenylethanol |
6.1 |
T1 |
III |
Acetic acid |
|
2810 |
Ethylene glycol monohexyl ether |
6.1 |
T1 |
III |
Acetic acid |
|
2810 |
Toxic liquid, organic, n.o.s. |
6.1 |
T1 |
I/II/III |
Rule for collective entries |
|
2815 |
N-Aminoethylpiperazine |
8 |
CT1 |
III |
Mixture of hydrocarbons and wetting solution |
|
2818 |
Ammonium polysulphide solution |
aqueous solution |
8 |
CT1 |
II/III |
Acetic acid |
2819 |
Amyl acid phosphate |
8 |
C3 |
III |
Wetting solution |
|
2820 |
Butyric acid |
n-Butyric acid |
8 |
C3 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
2821 |
Phenol solution |
aqueous solution, toxic, non- alkaline |
6.1 |
T1 |
II/III |
Acetic acid |
2829 |
Caproic acid |
n-Caproic acid |
8 |
C3 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
2837 |
Bisulphates, aqueous solution |
8 |
C1 |
II/III |
Water |
|
2838 |
Vinyl butyrate, stabilized |
3 |
F1 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
2841 |
Di-n-amylamine |
3 |
FT1 |
III |
Mixture of hydrocarbons and wetting solution |
|
2850 |
Propylene tetramer |
mixture of C12- monoolefines, flashpoint between 23 °C and 60 °C |
3 |
F1 |
III |
Mixture of hydrocarbons |
2873 |
Dibutylaminoethanol |
N,N-Di-n- butylaminoethanol |
6.1 |
T1 |
III |
Acetic acid |
2874 |
Furfuryl alcohol |
6.1 |
T1 |
III |
Acetic acid |
|
2920 |
O,O-Diethyl- dithiophosphoric acid |
flashpoint between 23 °C and 60 °C |
8 |
CF1 |
II |
n-Butylacetate/ n-Butylacetate-saturated wetting solution |
UN No. |
Proper shipping name or technical name |
Description |
Class |
Classifi- cation Code |
Packing group |
Standard liquid |
3.1.2 |
3.1.2 |
2.2 |
2.2 |
2.1.1.3 |
||
(1) |
(2a) |
(2b) |
(3a) |
(3b) |
(4) |
(5) |
2920 |
O,O-Dimethyl- dithiophosphoric acid |
flashpoint between 23 °C and 60 °C |
8 |
CF1 |
II |
Wetting solution |
2920 |
Hydrogen bromide |
33% solution in glacial acetic acid |
8 |
CF1 |
II |
Wetting solution |
2920 |
Tetramethylammonium hydroxide |
aqueous solution, flashpoint between 23 °C and 60 °C |
8 |
CF1 |
II |
Water |
2920 |
Corrosive liquid, flammable, n.o.s. |
8 |
CF1 |
I/II |
Rule for collective entries |
|
2922 |
Ammonium sulphide |
aqueous solution, flashpoint more than 60 °C |
8 |
CT1 |
II |
Water |
2922 |
Cresols |
aqueous alkaline solution, mixture of sodium and potassium cresolate, |
8 |
CT1 |
II |
Acetic acid |
2922 |
Phenol |
aqueous alkaline solution, mixture of sodium and potassium phenolate |
8 |
CT1 |
II |
Acetic acid |
2922 |
Sodium hydrogen difluoride |
aqueous solution |
8 |
CT1 |
III |
Water |
2922 |
Corrosive liquid, toxic, n.o.s. |
8 |
CT1 |
I/II/III |
Rule for collective entries |
|
2924 |
Flammable liquid, corrosive, n.o.s. |
slightly corrosive |
3 |
FC |
I/II/III |
Rule for collective entries |
2927 |
Toxic liquid, corrosive, organic, n.o.s. |
6.1 |
TC1 |
I/II |
Rule for collective entries |
|
2933 |
Methyl 2-chloro- propionate |
3 |
F1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
2934 |
Isopropyl 2-chloro- propionate |
3 |
F1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
2935 |
Ethyl 2-chloropropionate |
3 |
F1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
2936 |
Thiolactic acid |
6.1 |
T1 |
II |
Acetic acid |
|
2941 |
Fluoroanilines |
pure isomers and isomeric mixture |
6.1 |
T1 |
III |
Acetic acid |
2943 |
Tetrahydrofurfurylamine |
3 |
F1 |
III |
Mixture of hydrocarbons |
|
2945 |
N-Methylbutylamine |
3 |
FC |
II |
Mixture of hydrocarbons and wetting solution |
|
2946 |
2-Amino-5-diethyl- aminopentane |
6.1 |
T1 |
III |
Mixture of hydrocarbons and wetting solution |
|
2947 |
Isopropyl chloroacetate |
3 |
F1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
2984 |
Hydrogen peroxide, aqueous solution |
with not less than 8% but less than 20% hydrogen peroxide, stabilized as necessary |
5.1 |
O1 |
III |
Nitric acid |
3056 |
n-Heptaldehyde |
3 |
F1 |
III |
Mixture of hydrocarbons |
|
3065 |
Alcoholic beverages |
with more than 24% alcohol by volume |
3 |
F1 |
II/III |
Acetic acid |
UN No. |
Proper shipping name or technical name |
Description |
Class |
Classifi- cation Code |
Packing group |
Standard liquid |
3.1.2 |
3.1.2 |
2.2 |
2.2 |
2.1.1.3 |
||
(1) |
(2a) |
(2b) |
(3a) |
(3b) |
(4) |
(5) |
3066 |
Paint or Paint related material |
including paint, lacquer, enamel, stain, shellac, varnish, polish, liquid filler and liquid lacquer base or including paint thinning and reducing compound |
8 |
C9 |
II/III |
Rule for collective entries |
3079 |
Methacrylonitrile, stabilized |
6.1 |
TF1 |
I |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
3082 |
sec-Alcohol C6-C17poly (3-6) ethoxylate |
9 |
M6 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution and mixture of hydrocarbons |
|
3082 |
Alcohol C12-C15poly (1-3) ethoxylate |
9 |
M6 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution and mixture of hydrocarbons |
|
3082 |
Alcohol C13-C15poly (1-6) ethoxylate |
9 |
M6 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution and mixture of hydrocarbons |
|
3082 |
Aviation turbine fuel JP-5 |
flashpoint more than 60 °C |
9 |
M6 |
III |
Mixture of hydrocarbons |
3082 |
Aviation turbine fuel JP-7 |
flashpoint more than 60 °C |
9 |
M6 |
III |
Mixture of hydrocarbons |
3082 |
Coal tar |
flashpoint more than 60 °C |
9 |
M6 |
III |
Mixture of hydrocarbons |
3082 |
Coal tar naphtha |
flashpoint more than 60 °C |
9 |
M6 |
III |
Mixture of hydrocarbons |
3082 |
Creosote produced of coal tar |
flashpoint more than 60 °C |
9 |
M6 |
III |
Mixture of hydrocarbons |
3082 |
Creosote produced of wood tar |
flashpoint more than 60 °C |
9 |
M6 |
III |
Mixture of hydrocarbons |
3082 |
Cresyl diphenyl phosphate |
9 |
M6 |
III |
Wetting solution |
|
3082 |
Decyl acrylate |
9 |
M6 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution and mixture of hydrocarbons |
|
3082 |
Diisobutyl phthalate |
9 |
M6 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution and mixture of hydrocarbons |
|
3082 |
Di-n-butyl phthalate |
9 |
M6 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution and mixture of hydrocarbons |
|
3082 |
Hydrocarbons |
liquid, flashpoint more than 60 °C, environmentally hazardous |
9 |
M6 |
III |
Rule for collective entries |
3082 |
Isodecyl diphenyl phosphate |
9 |
M6 |
III |
Wetting solution |
|
3082 |
Methylnaphthalenes |
isomeric mixture, liquid |
9 |
M6 |
III |
Mixture of hydrocarbons |
3082 |
Triaryl phosphates |
n.o.s. |
9 |
M6 |
III |
Wetting solution |
UN No. |
Proper shipping name or technical name |
Description |
Class |
Classifi- cation Code |
Packing group |
Standard liquid |
3.1.2 |
3.1.2 |
2.2 |
2.2 |
2.1.1.3 |
||
(1) |
(2a) |
(2b) |
(3a) |
(3b) |
(4) |
(5) |
3082 |
Tricresyl phosphate |
with not more than 3% ortho-isomer |
9 |
M6 |
III |
Wetting solution |
3082 |
Trixylenyl phosphate |
9 |
M6 |
III |
Wetting solution |
|
3082 |
Zinc alkyl dithiophosphate |
C3-C14 |
9 |
M6 |
III |
Wetting solution |
3082 |
Zinc aryl dithiophosphate |
C7-C16 |
9 |
M6 |
III |
Wetting solution |
3082 |
Environmentally hazardous substance, liquid, n.o.s. |
9 |
M6 |
III |
Rule for collective entries |
|
3099 |
Oxidizing liquid, toxic, n.o.s. |
5.1 |
OT1 |
I/II/III |
Rule for collective entries |
|
3101 3103 3105 3107 3109 3111 3113 3115 3117 3119 |
Organic Peroxide, Type B, C, D, E or F, liquid or Organic Peroxide, Type B, C, D, E or F, liquid, temperature controlled |
5.2 |
P1 |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution and mixture of hydrocarbons and nitric acid** |
||
** For UN Nos. 3101, 3103, 3105, 3107, 3109, 3111, 3113, 3115, 3117, 3119 (tert-butyl hydroperoxide with more than 40% peroxide content and peroxyacetic acids are excluded): All organic peroxides in a technically pure form or in solution in solvents which, as far as their compatibility is concerned, are covered by the standard liquid "mixture of hydrocarbons" in this list. Compatibility of vents and gaskets with organic peroxides may be verified, also independently of the design type test, by laboratory tests with nitric acid. |
||||||
3145 |
Butylphenols |
liquid, n.o.s. |
8 |
C3 |
I/II/III |
Acetic acid |
3145 |
Alkylphenols, liquid, n.o.s. |
including C2 to C12 homologues |
8 |
C3 |
I/II/III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
3149 |
Hydrogen peroxide and peroxyacetic acid mixture, stabilized |
with UN 2790 acetic acid, UN 2796 sulphuric acid and/or UN 1805 phosphoric acid, water and not more than 5% peroxyacetic acid |
5.1 |
OC1 |
II |
Wetting solution and nitric acid |
3210 |
Chlorates, inorganic, aqueous solution, n.o.s. |
5.1 |
O1 |
II/III |
Water |
|
3211 |
Perchlorates, inorganic, aqueous solution, n.o.s. |
5.1 |
O1 |
II/III |
Water |
|
3213 |
Bromates, inorganic, aqueous solution, n.o.s. |
5.1 |
O1 |
II/III |
Water |
|
3214 |
Permanganates, inorganic, aqueous solution, n.o.s. |
5.1 |
O1 |
II |
Water |
|
3216 |
Persulphates, inorganic, aqueous solution, n.o.s. |
5.1 |
O1 |
III |
Wetting solution |
|
3218 |
Nitrates, inorganic, aqueous solution, n.o.s. |
5.1 |
O1 |
II/III |
Water |
|
3219 |
Nitrites, inorganic, aqueous solution, n.o.s. |
5.1 |
O1 |
II/III |
Water |
|
3264 |
Cupric chloride |
aqueous solution, slightly corrosive |
8 |
C1 |
III |
Water |
3264 |
Hydroxylamine sulphate |
25% aqueous solution |
8 |
C1 |
III |
Water |
3264 |
Phosphorous acid |
aqueous solution |
8 |
C1 |
III |
Water |
UN No. |
Proper shipping name or technical name |
Description |
Class |
Classifi- cation Code |
Packing group |
Standard liquid |
3.1.2 |
3.1.2 |
2.2 |
2.2 |
2.1.1.3 |
||
(1) |
(2a) |
(2b) |
(3a) |
(3b) |
(4) |
(5) |
3264 |
Corrosive liquid, acidic, inorganic, n.o.s. |
flashpoint more than 60 °C |
8 |
C1 |
I/II/III |
Rule for collective entries; not applicable to mixtures having components of UN Nos.: 1830, 1832, 1906 and 2308 |
3265 |
Methoxyacetic acid |
8 |
C3 |
I |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
3265 |
Allyl succinic acid anhydride |
8 |
C3 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
3265 |
Dithioglycolic acid |
8 |
C3 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
3265 |
Butyl phosphate |
mixture of mono- and di- butyl phosphate |
8 |
C3 |
III |
Wetting solution |
3265 |
Caprylic acid |
8 |
C3 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
3265 |
Isovaleric acid |
8 |
C3 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
3265 |
Pelargonic acid |
8 |
C3 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
3265 |
Pyruvic acid |
8 |
C3 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
3265 |
Valeric acid |
8 |
C3 |
III |
Acetic acid |
|
3265 |
Corrosive liquid, acidic, organic, n.o.s. |
flashpoint more than 60 °C |
8 |
C3 |
I/II/III |
Rule for collective entries |
3266 |
Sodium hydrosulphide |
aqueous solution |
8 |
C5 |
II |
Acetic acid |
3266 |
Sodium sulphide |
aqueous solution, slightly corrosive |
8 |
C5 |
III |
Acetic acid |
3266 |
Corrosive liquid, basic, inorganic, n.o.s. |
flashpoint more than 60 °C |
8 |
C5 |
I/II/III |
Rule for collective entries |
3267 |
2,2'-(Butylimino)- bisethanol |
8 |
C7 |
II |
Mixture of hydrocarbons and wetting solution |
|
3267 |
Corrosive liquid, basic, organic, n.o.s. |
flashpoint more than 60 °C |
8 |
C7 |
I/II/III |
Rule for collective entries |
3271 |
Ethylene glycol monobutyl ether |
flashpoint 60 °C |
3 |
F1 |
III |
Acetic acid |
3271 |
Ether, n.o.s. |
3 |
F1 |
II/III |
Rule for collective entries |
|
3272 |
Acrylic acid tert-butyl ester |
3 |
F1 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
3272 |
Isobutyl propionate |
flashpoint below 23 °C |
3 |
F1 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
3272 |
Methyl valerate |
3 |
F1 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
3272 |
Trimethyl ortho-formate |
3 |
F1 |
II |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
UN No. |
Proper shipping name or technical name |
Description |
Class |
Classifi- cation Code |
Packing group |
Standard liquid |
3.1.2 |
3.1.2 |
2.2 |
2.2 |
2.1.1.3 |
||
(1) |
(2a) |
(2b) |
(3a) |
(3b) |
(4) |
(5) |
3272 |
Ethyl valerate |
3 |
F1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
3272 |
Isobutyl isovalerate |
3 |
F1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
3272 |
n-Amyl propionate |
3 |
F1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
3272 |
n-Butylbutyrate |
3 |
F1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
3272 |
Methyl lactate |
3 |
F1 |
III |
n-Butyl acetate/ n-butyl acetate-saturated wetting solution |
|
3272 |
Ester, n.o.s. |
3 |
F1 |
II/III |
Rule for collective entries |
|
3287 |
Sodium nitrite |
40% aqueous solution |
6.1 |
T4 |
III |
Water |
3287 |
Toxic liquid, inorganic, n.o.s. |
6.1 |
T4 |
I/II/III |
Rule for collective entries |
|
3291 |
Clinical waste, unspecified, n.o.s. |
liquid |
6.2 |
I3 |
II |
Water |
3293 |
Hydrazine, aqueous solution |
with not more than 37% hydrazine, by mass |
6.1 |
T4 |
III |
Water |
3295 |
Heptenes |
n.o.s |
3 |
F1 |
II |
Mixture of hydrocarbons |
3295 |
Nonanes |
flashpoint below 23 °C |
3 |
F1 |
II |
Mixture of hydrocarbons |
3295 |
Decanes |
n.o.s |
3 |
F1 |
III |
Mixture of hydrocarbons |
3295 |
1,2,3-Trimethylbenzene |
3 |
F1 |
III |
Mixture of hydrocarbons |
|
3295 |
Hydrocarbons, liquid, n.o.s. |
3 |
F1 |
I/II/III |
Rule for collective entries |
|
3405 |
Barium chlorate, solution |
aqueous solution |
5.1 |
OT1 |
II/III |
Water |
3406 |
Barium perchlorate, solution |
aqueous solution |
5.1 |
OT1 |
II/III |
Water |
3408 |
Lead perchlorate, solution |
aqueous solution |
5.1 |
OT1 |
II/III |
Water |
3413 |
Potassium cyanide, solution |
aqueous solution |
6.1 |
T4 |
I/II/III |
Water |
3414 |
Sodium cyanide, solution |
aqueous solution |
6.1 |
T4 |
I/II/III |
Water |
3415 |
Sodium fluoride, solution |
aqueous solution |
6.1 |
T4 |
III |
Water |
3422 |
Potassium fluoride, solution |
aqueous solution |
6.1 |
T4 |
III |
Water |