- Türkçe
- English

- ADR 2019 (beta)
- ADR 2017

Sign Up

- Forgot Password

Dangerous Goods by Road

Index
- ADR 2017
ADR
- ADR Books
  ADR 2015
  
  ADR 2017
  What is Hazardous Substance?
  For which label number, what equipment is required?
  
  CARRIAGE PROHIBITED
  
  NOT SUBJECT TO ADR
  Which Hazardous Material Placards?
  Class 1 Explosives
  
  Class 2: Gases
  
  Class 3: Flammable Liquids
  
  Class 4: Flammable Solids
  
  Class 5: Oxidizing Agents and Organic Peroxides
  
  Class 6: Toxic and Infectious Substances
  
  Class 7: Radioactive Substances
  
  Class 8: Corrosive Substances
  
  Class 9: Miscellaneous

Home
3.4.8 3.4.8 about 4 results

Table A
Book
Table B

3.4.8

marking of packages containing limited quantities conforming to part 3, chapter 4 of the icao technical instructions

3.4.8 - Marking of packages containing limited quantities conforming to Part 3, Chapter 4 of the ICAO Technical Instructions
3.4.8.1
3.4.8.2
3.4.9

1 - General provisions

1 - General provisions
1.1 - SCOPE AND APPLICABILITY
1.1.2 - Scope
1.1.3 - Exemptions
1.1.3.2
1.1.3.6 - Exemptions related to quantities carried per transport unit
1.1.4 - Applicability of other regulations
1.1.4.2 - Carriage in a transport chain including maritime or air carriage
1.1.4.5 - Carriage other than by road
1.2 - DEFINITIONS AND UNITS OF MEASUREMENT
1.2.1 - Definitions
1.2.2 - Units of measurement
1.3 - TRAINING OF PERSONS INVOLVED IN THE CARRIAGE OF DANGEROUS GOODS
1.4 - SAFETY OBLIGATIONS OF THE PARTICIPANTS
1.4.1 - General safety measures
1.4.2.1 - Consignor
1.4.2.2 - Carrier
1.4.2.3 - Consignee
1.4.3.1 - Loader
1.4.3.7 - Unloader
1.5 - DEROGATIONS
1.5.1 - Temporary derogations
1.6 - TRANSITIONAL MEASURES
1.6.1 - General
1.6.2 - Pressure receptacles and receptacles for Class 2
1.6.3 - Fixed tanks (tank-vehicles), demountable tanks and battery-vehicles
1.6.3.100 - Fibre-reinforced plastics (FRP) tanks
1.6.4 - Tank-containers, portable tanks and MEGCs
1.6.5 - Vehicles
1.6.6 - Class 7
1.6.6.1 - Packages not requiring competent authority approval of design under the 1985 and 1985 (as amended 1990) editions of IAEA Safety Series No. 6
1.6.6.2 - Packages approved under the 1973, 1973 (as amended), 1985 and 1985 (as amended 1990) editions of IAEA Safety Series No. 6
1.6.6.3 - Packages excepted from the requirements for fissile materials under the 2011 and 2013 editions of ADR (2009 Edition of IAEA Safety Standard Series No.TS-R-1)
1.6.6.4 - Special form radioactive material approved under the 1973, 1973 (as amended), 1985 and 1985 (as amended 1990) Editions of IAEA Safety Series No. 6
1.7 - GENERAL PROVISIONS CONCERNING RADIOACTIVE MATERIAL
1.7.1 - Scope and application
1.7.1.5 - Specific provisions for the carriage of excepted packages
1.7.2 - Radiation protection programme
1.7.3 - Management system
1.7.4 - Special arrangement
1.7.5 - Radioactive material possessing other dangerous properties
1.7.6 - Non-compliance
1.8 - CHECKS AND OTHER SUPPORT MEASURES TO ENSURE COMPLIANCE WITH SAFETY REQUIREMENTS
1.8.1 - Administrative controls of dangerous goods
1.8.2 - Mutual administrative support
1.8.3 - Safety adviser
1.8.3.12 - Examinations
1.8.3.16 - Validity and renewal of certificates
1.8.3.18 - Form of certificate
1.8.3.19 - Extension of the certificate
1.8.4 - List of competent authorities and bodies designated by them
1.8.5 - Notifications of occurrences involving dangerous goods
1.8.5.4 - Model for report on occurrences during the carriage of dangerous goods
1.8.6 - Administrative controls for application of the conformity assessments, periodic inspections, intermediate inspections and exceptional checks described in 1.8.7
1.8.6.1 - Approval of inspection bodies
1.8.6.2 - Operational obligations for the competent authority, its delegate or inspection body
1.8.6.3 - Delegation of inspection tasks
1.8.6.5 - Information obligations for inspection bodies
1.8.7 - Procedures for conformity assessment and periodic inspection
1.8.7.1 - General provisions
1.8.7.2 - Type approval
1.8.7.3 - Supervision of manufacture
1.8.7.4 - Initial inspection and tests
1.8.7.5 - Periodic inspection, intermediate inspection and exceptional checks
1.8.7.6 - Surveillance of the applicant’s in-house inspection service
1.8.7.7 - Documents
1.8.7.8 - Products manufactured, approved, inspected and tested according to standards
1.8.8 - Procedures for conformity assessment of gas cartridges
1.8.8.1 - General provisions
1.8.8.2 - Design type examination
1.8.8.3 - Supervision of manufacture
1.8.8.4 - Leakproofness test
1.8.8.6 - Surveillance of the in-house inspection service
1.8.8.7 - Documents
1.9 - TRANSPORT RESTRICTIONS BY THE COMPETENT AUTHORITIES
1.9.5 - Tunnel restrictions
1.9.5.1 - General provisions
1.9.5.2 - Categorization
1.9.5.3 - Provisions for road signs and notification of restrictions
1.10 - SECURITY PROVISIONS
1.10.1 - General provisions
1.10.2 - Security training
1.10.3 - Provisions for high consequence dangerous goods
1.10.3.1 - Definition of high consequence dangerous goods
1.10.3.2 - Security plans

2 - Classification

2 - Classification
2.1 - GENERAL PROVISIONS
2.1.1 - Introduction
2.1.2 - Principles of classification
2.1.3 - Classification of substances, including solutions and mixtures (such as preparations and wastes), not mentioned by name
2.1.3.10 - Table of precedence of hazards
2.1.4 - Classification of samplesof samples
2.1.4.3 - Samples of energetic materials for testing purposes
2.1.5 - Classification of articles as articles containing dangerous goods, n.o.s.
2.1.6 - Classification of packagings, discarded, empty, uncleaned
2.2 - CLASS SPECIFIC PROVISIONS
2.2.1 - Class 1 Explosive substances and articles
2.2.1.1 - Criteria
2.2.1.1.7 - Assignment of fireworks to divisions
2.2.1.1.8 - Exclusion from Class 1
2.2.1.1.9 - Classification documentation
2.2.1.2 - Substances and articles not accepted for carriage
2.2.1.3 - List of collective entries
2.2.1.4 - Glossary of names
2.2.2 - Class 2 Gases
2.2.2.1 - Criteria
2.2.2.1.6 - Aerosols
2.2.2.2 - Gases not accepted for carriage
2.2.2.3 - List of collective entries
2.2.3 - Class 3 Flammable liquids
2.2.3.1 - Criteria
2.2.3.2 - Substances not accepted for carriage
2.2.3.3 - List of collective entries
2.2.7 - Class 7 Radioactive material
2.2.7.1 - Definitions
2.2.7.2 - Classification
2.2.7.2.1 - General provisions
2.2.7.2.2 - Determination of basic radionuclide values
2.2.7.2.3 - Determination of other material characteristics
2.2.7.2.3.1 - Low specific activity (LSA) material
2.2.7.2.3.3 - Special form radioactive material
2.2.7.2.3.4 - Low dispersible radioactive material
2.2.7.2.4.1 - Classification as excepted package
2.2.7.2.4.5 - Classification of uranium hexafluoride
2.2.7.2.4.6 - Classification as Type B(U), Type B(M) or Type C packages
2.2.8 - Class 8 Corrosive substances
2.2.8.1 - Definition, general provisions and criteria
2.2.8.1.4 - General classification provisions
2.2.8.1.5 - Packing group assignment for substances and mixtures
2.2.8.1.6 - Alternative packing group assignment methods for mixtures: Step-wise approach
2.2.8.1.6.3 - Calculation method based on the classification of the substances
2.2.8.2 - Substances not accepted for carriage
2.2.9 - Class 9 Miscellaneous dangerous substances and articles
2.2.9.1 - Criteria
2.2.9.1.9 - Environmentally hazardous substances
2.2.9.1.10.1 - General definitions
2.2.9.1.10.2 - Definitions and data requirements
2.2.9.1.10.3 - Substance classification categories and criteria
2.2.9.1.10.4 - Mixtures classification categories and criteria
2.2.9.1.10.4.3 - Classification of mixtures when toxicity data are available for the complete mixture
2.2.9.1.10.4.4 - Classification of mixtures when toxicity data are not available for the complete mixture: bridging principles
2.2.9.1.10.4.6 - Summation method
2.2.9.1.10.4.6.2 - Classification for category Acute 1
2.2.9.1.10.4.6.3 - Classification for categories Chronic 1 and 2
2.2.9.3 - List of entries
2.2.41 - Class 4.1Flammable solids, self-reactive substances, polymerizing substancesand solid desensitized explosives
2.2.41.1 - Criteria
2.2.41.2 - Substances not accepted for carriage
2.2.42 - Class 4.2 Substances liable to spontaneous combustion
2.2.42.1 - Criteria
2.2.43 - Class 4.3 Substances which, in contact with water, emit flammable gases
2.2.43.1 - Criteria
2.2.43.3 - List of collective entries
2.2.51 - Class 5.1 Oxidizing substances
2.2.51.1 - Criteria
2.2.51.2 - Substances not accepted for carriage
2.2.51.3 - List of collective entries
2.2.52 - Class 5.2 Organic peroxides
2.2.52.1 - Criteria
2.2.52.3 - List of collective entries
2.2.61 - Class 6.1 Toxic substances
2.2.61.1 - Criteria
2.2.61.2 - Substances not accepted for carriage
2.2.62 - Class 6.2 Infectious substances
2.2.62.1 - Criteria
2.2.62.1.5 - Exemptions
2.2.62.1.11 - Medical or clinical wastes
2.2.62.1.12 - Infected animals
2.2.62.3 - List of collective entries
2.3 - TEST METHODS
2.3.1 - Exudation test for blasting explosives of Type A
2.3.2 - Tests relating to nitrated cellulose mixtures of Class 4.1
2.3.3 - Tests relating to flammable liquids of Classes 3, 6.1 and 8
2.3.3.1 - Determination of flash-point
2.3.4.3 - Evaluation of test results

3 - Dangerous goods list, special provisions and exemptions related to limited and excepted quantities

3 - Dangerous goods list, special provisions and exemptions related to limited and excepted quantities
3.1 - GENERAL
3.1.2.8 - Generic or not otherwise specified (N.O.S.) names
3.1.3 - Solutions or mixtures
3.2 - DANGEROUS GOODS LIST
3.3 - SPECIAL PROVISIONS APPLICABLE TO CERTAIN ARTICLES OR SUBSTANCES
3.4 - DANGEROUS GOODS PACKED IN LIMITED QUANTITIES
3.4.7 - Marking of packages containing limited quantities
3.4.8 - Marking of packages containing limited quantities conforming to Part 3, Chapter 4 of the ICAO Technical Instructions
3.5 - DANGEROUS GOODS PACKED IN EXCEPTED QUANTITIES
3.5.1 - Excepted quantities
3.5.3 - Tests for packages
3.5.4 - Marking of packages

4 - Packing and tank provisions

4 - Packing and tank provisions
4.1 - USE OF PACKAGINGS, INCLUDING INTERMEDIATE BULK CONTAINERS (IBCs) AND LARGE PACKAGINGS
4.1.1.19 - Use of salvage packagings and large salvage packagings
4.1.1.20 - Use of salvage pressure receptacles
4.1.1.21 - Verification of the chemical compatibility of plastics packagings, including IBCs, by assimilation of filling substances to standard liquids
4.1.2 - Additional general provisions for the use of IBCs
4.1.3 - General provisions concerning packing instructions
4.1.3.6 - Pressure receptacles for liquids and solids
4.1.3.8 - Unpackaged articles other than Class 1 articles
4.1.4.1 - Packing instructions concerning the use of packagings (except IBCs and large packagings)
4.1.4.2
4.1.4.3
4.1.5 - Special packing provisions for goods of Class 1
4.1.6 - Special packing provisions for goods of Class 2 and goods of other classes assigned to packing instruction P200
4.1.7 - Special packing provisions for organic peroxides (Class 5.2) and self-reactive substances of Class 4.1
4.1.7.1 - Use of packagings (except IBCs)
4.1.7.2 - Use of intermediate bulk containers
4.1.8 - Special packing provisions for infectious substances (Class 6.2)
4.1.9 - Special packing provisions for radioactive material
4.1.9.1 - General
4.1.9.2 - Requirements and controls for carriage of LSA material and SCO
4.1.10 - Special provisions for mixed packing
4.2 - USE OF PORTABLE TANKS AND UN MULTIPLE-ELEMENT GAS CONTAINERS (MEGCs)
4.2.1 - General provisions for the use of portable tanks for the carriage of substances of Class 1 and Classes 3 to 9
4.2.1.9 - Degree of filling
4.2.1.10 - Additional provisions applicable to the carriage of Class 3 substances in portable tanks
4.2.1.11 - Additional provisions applicable to the carriage of Classes 4.1, 4.2 or 4.3 substances (other than Class 4.1 self-reactive substances) in portable tanks
4.2.1.12 - Additional provisions applicable to the carriage of Class 5.1 substances in portable tanks
4.2.1.13 - Additional provisions applicable to the carriage of Class 5.2 substances and Class 4.1 self-reactive substances in portable tanks
4.2.1.14 - Additional provisions applicable to the carriage of Class 6.1 substances in portable tanks
4.2.1.15 - Additional provisions applicable to the carriage of Class 6.2 substances in portable tanks
4.2.1.16 - Additional provisions applicable to the carriage of Class 7 substances in portable tanks
4.2.1.17 - Additional provisions applicable to the carriage of Class 8 substances in portable tanks
4.2.1.18 - Additional provisions applicable to the carriage of Class 9 substances in portable tanks
4.2.1.19 - Additional provisions applicable to the carriage of solid substances carried above their melting point
4.2.2 - General provisions for the use of portable tanks for the carriage of non-refrigerated liquefied gases and chemicals under pressure
4.2.2.7 - Filling
4.2.3 - General provisions for the use of portable tanks for the carriage of refrigerated liquefied gases
4.2.3.6 - Filling
4.2.3.7 - Actual holding time
4.2.4 - General provisions for the use of UN multiple-element gas containers (MEGCs)
4.2.4.5 - Filling
4.2.5 - Portable tank instructions and special provisions
4.2.5.1 - General
4.2.5.2 - Portable tank instructions
4.2.5.2.5 - Determination of the appropriate portable tank instructions
4.2.5.2.6 - Portable tank instructions
4.2.5.3 - Portable tank special provisions
4.3 - USE OF FIXED TANKS (TANK-VEHICLES), DEMOUNTABLE TANKS, TANK-CONTAINERS AND TANK SWAP BODIES WITH SHELLS MADE OF METALLIC MATERIALS, AND BATTERY-VEHICLES AND MULTIPLE-ELEMENT GAS CONTAINERS (MEGCs)
4.3.1 - Scope
4.3.2 - Provisions applicable to all classes
4.3.2.1 - Use
4.3.2.2 - Degree of filling
4.3.2.3 - Operation
4.3.2.4 - Empty tanks, battery-vehicles and MEGCs, uncleaned
4.3.3 - Special provisions applicable to Class 2
4.3.3.1 - Coding and hierarchy of tanks
4.3.3.1.2 - Hierarchy of tanks
4.3.3.2 - Filling conditions and test pressures
4.3.3.3
4.3.4
4.3.4.1
4.3.4.1.1
4.3.4.2
4.3.5
4.4
4.4.2
4.5
4.5.1
4.5.2
4.6
4.7
4.7.1
4.7.2

5

6

7

7
7.1
7.2
7.3
7.3.1
7.3.2
7.3.2.3
7.3.2.4
7.3.2.5
7.3.2.6
7.3.2.7
7.3.2.8
7.3.2.9
7.3.2.10
7.3.3
7.4
7.5
7.5.1
7.5.2
7.5.4
7.5.5
7.5.5.2
7.5.7
7.5.7.6
7.5.8
7.5.9
7.5.10
7.5.11

8

9

adrbook.com - Copyright all rights reserved. © 2015-2018