packages requiring competent authority approval of the design shall meet the requirements of adr in full unless the following conditions are met:

(a)    the packagings were manufactured to a package design approved by the competent authority under the provisions of the 1973 or 1973 (as amended) or the 1985 or 1985 (as amended 1990) editions of iaea safety series no.6;

(b)    the package design is subject to multilateral approval;

(c)    the applicable requirements of 1.7.3 are applied;

(d)    the activity limits and classification in 2.2.7 are applied;

(e)    the requirements and controls for carriage in parts 1, 3, 4, 5 and 7 are applied;

(f)    (reserved)

(g)    for packages that meet the requirements of the 1973 or 1973 (as amended) editions of iaea safety series no. 6:

(i)    the packages retain sufficient shielding to ensure that the radiation level at 1 m from   the surface of the package would not exceed 10 msv/h in the accident conditions of carriage defined in the 1973 revised or 1973 revised (as amended) editions of iaea
 

safety series no.6 with the maximum radioactive contents which the package is authorized to contain;

(ii)    the packages do not utilize continuous venting;

(iii)    a serial number in accordance with the provision of 5.2.1.7.5 is assigned to and marked on the outside of each packaging.
 

adrbook.com - Copyright all rights reserved. © 2015-2018