Dangerous Goods by Road
full unless the following conditions are met:
(a) the packagings were manufactured to a package design approved by the competent authority
under the provisions of the 1973 or 1973 (as amended) or the 1985 or 1985 (as amended 1990)
editions of iaea safety series no.6;
(b) the package design is subject to multilateral approval;
(c) the applicable requirements of 1.7.3 are applied;
(d) the activity limits and classification in 2.2.7 are applied;
(e) the requirements and controls for carriage in parts 1, 3, 4, 5 and 7 are applied;
(f) (reserved)
(g) for packages that meet the requirements of the 1973 or 1973 (as amended) editions of iaea
safety series no. 6:
(i) the packages retain sufficient shielding to ensure that the radiation level at 1 m from
the surface of the package would not exceed 10 msv/h in the accident conditions of
carriage defined in the 1973 revised or 1973 revised (as amended) editions of iaea
safety series no.6 with the maximum radioactive contents which the package is
authorized to contain;
(ii) the packages do not utilize continuous venting;
(iii) a serial number in accordance with the provision of 5.2.1.7.5 is assigned to and marked
on the outside of each packaging.