- Türkçe
- English

- ADR 2019 (beta)
- ADR 2017

Sign Up

- Forgot Password

Dangerous Goods by Road

Index
- ADR 2017
ADR
- ADR Books
  ADR 2015
  
  ADR 2017
  What is Hazardous Substance?
  For which label number, what equipment is required?
  
  CARRIAGE PROHIBITED
  
  NOT SUBJECT TO ADR
  Which Hazardous Material Placards?
  Class 1 Explosives
  
  Class 2: Gases
  
  Class 3: Flammable Liquids
  
  Class 4: Flammable Solids
  
  Class 5: Oxidizing Agents and Organic Peroxides
  
  Class 6: Toxic and Infectious Substances
  
  Class 7: Radioactive Substances
  
  Class 8: Corrosive Substances
  
  Class 9: Miscellaneous

Home
6.2.2.5 6.2.2.5 about 37 results

Table A
Book
Table B

6.2.2.5

conformity assessment system and approval for manufacture of pressure receptacles

4.1.4.1 - Packing instructions concerning the use of packagings (except IBCs and large packagings)
6.2.2.1.1
6.2.2.1.2
6.2.2.1.3
6.2.2.1.4
6.2.2.1.5
6.2.2.1.6
6.2.2.1.7
6.2.2.5 - Conformity assessment system and approval for manufacture of pressure receptacles
6.2.2.5.1 - Definitions
6.2.2.5.2 - General requirements
6.2.2.5.2.1
6.2.2.5.2.2
6.2.2.5.2.3
6.2.2.5.2.4 - Inspection body
6.2.2.5.2.5
6.2.2.5.2.6 - Manufacturer
6.2.2.5.2.7 - Testing laboratory
6.2.2.5.3 - Manufacturer's quality system
6.2.2.5.3.1
6.2.2.5.3.2 - Audit of the quality system
6.2.2.5.3.3 - Maintenance of the quality system
6.2.2.5.4 - Approval process
6.2.2.5.4.1 - Initial design type approval
6.2.2.5.4.2
6.2.2.5.4.3
6.2.2.5.4.4
6.2.2.5.4.5
6.2.2.5.4.6
6.2.2.5.4.7 - Subsequent design type approvals
6.2.2.5.4.8
6.2.2.5.4.9 - Procedure for design type approval
6.2.2.5.4.10
6.2.2.5.4.11
6.2.2.5.5 - Production inspection and certification
6.2.2.5.6 - Records
6.2.2.11 - Equivalent procedures for conformity assessment and periodic inspection and test

1 - General provisions

1 - General provisions
1.1 - SCOPE AND APPLICABILITY
1.1.2 - Scope
1.1.3 - Exemptions
1.1.3.2 - Exemptions related to the carriage of gases
1.1.3.6 - Exemptions related to quantities carried per transport unit
1.1.4 - Applicability of other regulations
1.1.4.2 - Carriage in a transport chain including maritime or air carriage
1.1.4.5 - Carriage other than by road
1.2 - DEFINITIONS AND UNITS OF MEASUREMENT
1.2.1 - Definitions
1.2.2 - Units of measurement
1.3 - TRAINING OF PERSONS INVOLVED IN THE CARRIAGE OF DANGEROUS GOODS
1.4 - SAFETY OBLIGATIONS OF THE PARTICIPANTS
1.4.1 - General safety measures
1.4.2.1 - Consignor
1.4.2.2 - Carrier
1.4.2.3 - Consignee
1.4.3.1 - Loader
1.4.3.7 - Unloader
1.5 - DEROGATIONS
1.5.1 - Temporary derogations
1.6 - TRANSITIONAL MEASURES
1.6.1 - General
1.6.2 - Pressure receptacles and receptacles for Class 2
1.6.3 - Fixed tanks (tank-vehicles), demountable tanks and battery-vehicles
1.6.4 - Tank-containers, portable tanks and MEGCs
1.6.5 - Vehicles
1.6.6 - Class 7
1.6.6.2 - Packages approved under the 1973, 1973 (as amended), 1985 and 1985 (as amended 1990) editions of IAEA Safety Series No. 6
1.7 - GENERAL PROVISIONS CONCERNING RADIOACTIVE MATERIAL
1.7.1.5 - Specific provisions for the carriage of excepted packages
1.7.2 - Radiation protection programme
1.7.4 - Special arrangement
1.7.6 - Non-compliance
1.8 - CHECKS AND OTHER SUPPORT MEASURES TO ENSURE COMPLIANCE WITH SAFETY REQUIREMENTS
1.8.1 - Administrative controls of dangerous goods
1.8.2 - Mutual administrative support
1.8.3 - Safety adviser
1.8.3.12 - Examinations
1.8.3.16 - Validity and renewal of certificates
1.8.5 - Notifications of occurrences involving dangerous goods
1.8.6 - Administrative controls for application of the conformity assessments, periodic inspections, intermediate inspections and exceptional checks described in 1.8.7
1.8.6.2 - Operational obligations for the competent authority, its delegate or inspection body
1.8.7.1 - General provisions
1.8.7.2 - Type approval
1.8.7.3 - Supervision of manufacture
1.8.7.4 - Initial inspection and tests
1.8.7.5 - Periodic inspection, intermediate inspection and exceptional checks
1.8.7.6 - Surveillance of the applicant’s in-house inspection service
1.8.8.1 - General provisions
1.8.8.2 - Design type examination
1.8.8.3 - Supervision of manufacture
1.8.8.4 - Leakproofness test
1.9 - TRANSPORT RESTRICTIONS BY THE COMPETENT AUTHORITIES
1.9.5 - Tunnel restrictions
1.9.5.2 - Categorization
1.9.5.3 - Provisions for road signs and notification of restrictions
1.10 - SECURITY PROVISIONS
1.10.1 - General provisions
1.10.2 - Security training
1.10.3 - Provisions for high consequence dangerous goods
1.10.3.1 - Definition of high consequence dangerous goods
1.10.3.2 - Security plans

2 - Classification

2 - Classification
2.1 - GENERAL PROVISIONS
2.1.1 - Introduction
2.1.2 - Principles of classification
2.1.3 - Classification of substances, including solutions and mixtures (such as preparations and wastes), not mentioned by name
2.1.3.10 - 2.1.3.10 Table of precedence of hazards
2.1.4 - Classification of samples
2.2 - CLASS SPECIFIC PROVISIONS
2.2.1 - Class 1 Explosive substances and articles
2.2.1.1 - Criteria
2.2.1.1.7 - Assignment of fireworks to divisions
2.2.1.1.8 - Exclusion from Class 1
2.2.1.1.9 - Classification documentation
2.2.1.2 - Substances and articles not accepted for carriage
2.2.1.3 - List of collective entries
2.2.1.4 - Glossary of names
2.2.2 - Class 2 Gases
2.2.2.1 - Criteria
2.2.2.1.6 - Aerosols
2.2.2.2 - Gases not accepted for carriage
2.2.2.3 - List of collective entries
2.2.3 - Class 3 Flammable liquids
2.2.3.1 - Criteria
2.2.3.1.5 - Viscous liquids
2.2.3.2 - Substances not accepted for carriage
2.2.41 - Class 4.1 Flammable solids, self-reactive substances, polymerizing substances and solid desensitized explosives
2.2.41.1 - Criteria
2.2.41.2 - Substances not accepted for carriage
2.2.42 - Class 4.2 Substances liable to spontaneous combustion
2.2.42.1 - Criteria
2.2.43 - Class 4.3 Substances which, in contact with water, emit flammable gases
2.2.43.1 - Criteria
2.2.43.3 - List of collective entries
2.2.51 - Class 5.1 Oxidizing substances
2.2.51.1 - Criteria
2.2.51.2 - Substances not accepted for carriage
2.2.51.3 - List of collective entries
2.2.52 - Class 5.2 Organic peroxides
2.2.52.1 - Criteria
2.2.52.3 - List of collective entries
2.2.61 - Class 6.1 Toxic substances
2.2.61.1 - Criteria
2.2.61.2 - Substances not accepted for carriage
2.2.62 - Class 6.2 Infectious substances
2.2.62.1 - Criteria
2.2.62.1.5 - Exemptions
2.2.62.1.11 - Medical or clinical wastes
2.2.62.1.12 - Infected animals
2.2.62.3 - List of collective entries
2.2.7 - Class 7 Radioactive material
2.2.7.1 - Definitions
2.2.7.2 - Classification
2.2.7.2.1 - General provisions
2.2.7.2.2 - Determination of basic radionuclide values
2.2.7.2.3 - Determination of other material characteristics
2.2.7.2.3.1 - Low specific activity (LSA) material
2.2.7.2.3.3 - Special form radioactive material
2.2.7.2.3.4 - Low dispersible radioactive material
2.2.7.2.4.1 - Classification as excepted package
2.2.7.2.4.5 - Classification of uranium hexafluoride
2.2.7.2.4.6 - Classification as Type B(U), Type B(M) or Type C packages
2.2.8 - Class 8 Corrosive substances
2.2.8.1 - Criteria
2.2.8.2 - Substances not accepted for carriage
2.2.9 - Class 9 Miscellaneous dangerous substances and articles
2.2.9.1 - Criteria
2.2.9.1.9 - Environmentally hazardous substances
2.2.9.1.10.1 - General definitions
2.2.9.1.10.2 - Definitions and data requirements
2.2.9.1.10.3 - Substance classification categories and criteria
2.2.9.1.10.4 - Mixtures classification categories and criteria
2.2.9.1.10.4.3 - Classification of mixtures when toxicity data are available for the complete mixture
2.2.9.1.10.4.5 - Classification of mixtures when toxicity data are available for all ingredients or only for some ingredients of the mixture
2.2.9.1.10.4.6 - Summation method
2.2.9.1.10.4.6.2 - Classification for category Acute 1
2.2.9.1.10.4.6.3 - Classification for categories Chronic 1 and 2
2.2.9.3 - List of entries
2.3 - TEST METHODS
2.3.1 - Exudation test for blasting explosives of Type A
2.3.2 - Tests relating to nitrated cellulose mixtures of Class 4.1
2.3.3 - Tests relating to flammable liquids of Classes 3, 6.1 and 8
2.3.3.1 - Determination of flash-point
2.3.4.3 - Evaluation of test results

3 - Dangerous goods list, special provisions and exemptions related to limited and excepted quantities

3 - Dangerous goods list, special provisions and exemptions related to limited and excepted quantities
3.1 - GENERAL
3.1.2.8
3.1.3 - Solutions or mixtures
3.2 - DANGEROUS GOODS LIST
3.3 - SPECIAL PROVISIONS APPLICABLE TO CERTAIN ARTICLES OR SUBSTANCES
3.4 - DANGEROUS GOODS PACKED IN LIMITED QUANTITIES
3.4.7 - Marking of packages containing limited quantities
3.4.8 - Marking of packages containing limited quantities conforming to Part 3, Chapter 4 of the ICAO Technical Instructions
3.5 - DANGEROUS GOODS PACKED IN EXCEPTED QUANTITIES
3.5.1 - Excepted quantities
3.5.3 - Tests for packages
3.5.4 - Marking of packages

4 - Packing and tank provisions

4 - Packing and tank provisions
4.1 - USE OF PACKAGINGS, INCLUDING INTERMEDIATE BULK CONTAINERS (IBCs) AND LARGE PACKAGINGS
4.1.1.19 - Use of salvage packagings and large salvage packagings
4.1.1.19.3 - Appropriate measures shall be taken to ensure that there is no dangerous build up of pressure.
4.1.1.20 - Use of salvage pressure receptacles
4.1.1.21 - Verification of the chemical compatibility of plastics packagings, including IBCs, by assimilation of filling substances to standard liquids
4.1.2 - Additional general provisions for the use of IBCs
4.1.3 - General provisions concerning packing instructions
4.1.3.6 - Pressure receptacles for liquids and solids
4.1.3.8 - Unpackaged articles other than Class 1 articles
4.1.4.1 - Packing instructions concerning the use of packagings (except IBCs and large packagings)
4.1.4.2 - Packing instructions concerning the use of IBCs
4.1.4.3 - Packing instructions concerning the use of large packagings
4.1.5 - Special packing provisions for goods of Class 1
4.1.6 - Special packing provisions for goods of Class 2 and goods of other classes assigned to packing instruction P200
4.1.7 - Special packing provisions for organic peroxides (Class 5.2) and self-reactive substances of Class 4.1
4.1.7.1 - Use of packagings (except IBCs)
4.1.7.2 - Use of intermediate bulk containers
4.1.8 - Special packing provisions for infectious substances (Class 6.2)
4.1.9 - Special packing provisions for radioactive material
4.1.9.1 - General
4.1.9.2 - Requirements and controls for carriage of LSA material and SCO
4.1.10 - Special provisions for mixed packing
4.2 - USE OF PORTABLE TANKS AND UN MULTIPLE-ELEMENT GAS CONTAINERS (MEGCs)
4.2.1 - General provisions for the use of portable tanks for the carriage of substances of Class 1 and Classes 3 to 9
4.2.1.9 - Degree of filling
4.2.1.10 - Additional provisions applicable to the carriage of Class 3 substances in portable tanks
4.2.1.11 - Additional provisions applicable to the carriage of Classes 4.1, 4.2 or 4.3 substances (other than Class 4.1 self-reactive substances) in portable tanks
4.2.1.12 - Additional provisions applicable to the carriage of Class 5.1 substances in portable tanks
4.2.1.13 - Additional provisions applicable to the carriage of Class 5.2 substances and Class 4.1 self-reactive substances in portable tanks
4.2.1.14 - Additional provisions applicable to the carriage of Class 6.1 substances in portable tanks
4.2.1.15 - Additional provisions applicable to the carriage of Class 6.2 substances in portable tanks
4.2.1.16 - Additional provisions applicable to the carriage of Class 7 substances in portable tanks
4.2.1.17 - Additional provisions applicable to the carriage of Class 8 substances in portable tanks
4.2.1.18 - Additional provisions applicable to the carriage of Class 9 substances in portable tanks
4.2.1.19 - Additional provisions applicable to the carriage of solid substances carried above their melting point
4.2.2 - General provisions for the use of portable tanks for the carriage of non-refrigerated liquefied gases and chemicals under pressure
4.2.2.7 - Filling
4.2.3 - General provisions for the use of portable tanks for the carriage of refrigerated liquefied gases
4.2.3.6 - Filling
4.2.3.7 - Actual holding time
4.2.4 - General provisions for the use of UN multiple-element gas containers (MEGCs)
4.2.4.5 - Filling
4.2.5 - Portable tank instructions and special provisions
4.2.5.1 - General
4.2.5.2 - Portable tank instructions
4.2.5.2.5 - Determination of the appropriate portable tank instructions
4.2.5.2.6 - Portable tank instructions
4.2.5.3 - Portable tank special provisions
4.3 - USE OF FIXED TANKS (TANK-VEHICLES), DEMOUNTABLE TANKS, TANK-CONTAINERS AND TANK SWAP BODIES WITH SHELLS MADE OF METALLIC MATERIALS, AND BATTERY-VEHICLES AND MULTIPLE-ELEMENT GAS CONTAINERS (MEGCs)
4.3.1 - Scope
4.3.2 - Provisions applicable to all classes
4.3.2.1 - Use
4.3.2.2 - Degree of filling
4.3.2.3 - Operation
4.3.2.4 - Empty tanks, battery-vehicles and MEGCs, uncleaned
4.3.3 - Special provisions applicable to Class 2
4.3.3.1 - Coding and hierarchy of tanks
4.3.3.1.2 - Hierarchy of tanks
4.3.3.2 - Filling conditions and test pressures
4.3.3.3 - Operation
4.3.4 - Special provisions applicable to Classes 1 and 3 to 9
4.3.4.1 - Coding, rationalized approach and hierarchy of tanks
4.3.4.1.1 - Coding of tanks
4.3.4.2 - General provisions
4.3.5 - Special provisions
4.4 - USE OF FIBRE-REINFORCED PLASTICS (FRP) TANKS, FIXED TANKS (TANK-VEHICLES), DEMOUNTABLE TANKS, TANK-CONTAINERS AND TANK SWAP BODIES
4.4.2 - Operation
4.5 - USE OF VACUUM OPERATED WASTE TANKS
4.5.1 - Use
4.5.2 - Operation
4.6 - (Reserved)
4.7 - USE OF MOBILE EXPLOSIVES MANUFACTURING UNITS (MEMUs)
4.7.1 - Use
4.7.2 - Operation

5 - Consignment procedures

5 - Consignment procedures
5.1 - GENERAL PROVISIONS
5.1.1 - Application and general provisions
5.1.2 - Use of overpacks
5.1.3 - Empty uncleaned packagings (including IBCs and large packagings), tanks, MEMUs, vehicles and containers for carriage in bulk
5.1.4 - Mixed packing
5.1.5 - General provisions for Class 7
5.1.5.1 - Approval of shipments and notificat
5.1.5.2 - Certificates issued by the competent authority
5.1.5.3 - Determination of transport index (TI) and criticality safety index (CSI)
5.1.5.4 - Specific provisions for excepted packages of radioactive material of Class 7
5.1.5.5 - Summary of approval and prior notification requirements
5.2 - MARKING AND LABELLING
5.2.1 - Marking of packages
5.2.1.5 - Additional provisions for goods of Class 1
5.2.1.6 - Additional provisions for goods of Class 2
5.2.1.7 - Special marking provisions for radioactive material
5.2.1.8 - Special marking provisions for environmentally hazardous substances
5.2.1.9 - Lithium battery mark
5.2.1.10 - Orientation arrows
5.2.2 - Labelling of packages
5.2.2.1 - Labelling provisions
5.2.2.1.11 - Special provisions for the labelling of radioactive material
5.2.2.2 - Provisions for labels
5.2.2.2.2 - Specimen labels
5.3 - PLACARDING AND MARKING OF CONTAINERS, MEGCs, MEMUs, TANKCONTAINERS, PORTABLE TANKS AND VEHICLES
5.3.1 - Placarding
5.3.1.1 - General provisions
5.3.1.2 - Placarding of containers, MEGCs, tank-containers and portable tanks
5.3.1.3 - Placarding of vehicles carrying containers, MEGCs, tank-containers or portable tanks
5.3.1.4 - Placarding of vehicles for carriage in bulk, tank-vehicles, battery-vehicles, MEMUs and vehicles with demountable tanks
5.3.1.5 - Placarding of vehicles carrying packages only
5.3.1.6 - Placarding of empty tank-vehicles, battery-vehicles, MEGCs, MEMUs, tank-containers, portable tanks and empty vehicles and containers for carriage in bulk
5.3.1.7 - Specifications for placards
5.3.2 - Orange-coloured plate marking
5.3.2.1 - General orange-coloured plate marking provisions
5.3.2.2 - Specifications for the orange-coloured plates
5.3.2.2.3 - Example of orange-coloured plate with hazard identification number and UN number
5.3.2.3 - Meaning of hazard identification numbers
5.3.3 - Elevated temperature substance mark
5.3.6 - Environmentally hazardous substance mark
5.4 - DOCUMENTATION
5.4.0 - General
5.4.1 - Dangerous goods transport document and related information
5.4.1.1 - General information required in the transport document
5.4.1.1.6 - Special provision for empty means of containment, uncleaned
5.4.1.2 - Additional or special information required for certain classes
5.4.1.2.3 - Additional provisions for self-reactive substances and polymerizing substances of Class 4.1 and organic peroxides of Class 5.2
5.4.1.2.5 - Additional provisions for Class 7
5.4.1.4 - Format and language
5.4.1.5 - Non-dangerous goods
5.4.2 - Container/vehicle packing certificate
5.4.3 - Instructions in writing
5.4.4 - Retention of dangerous goods transport information
5.4.5 - Example of a multimodal dangerous goods form
5.5 - SPECIAL PROVISIONS
5.5.2 - Special provisions applicable to fumigated cargo transport units (UN 3359)
5.5.2.1 - General
5.5.2.2 - Training
5.5.2.3 - Marking and placarding
5.5.2.4 - Documentation
5.5.3 - Special provisions applicable to packages and vehicles and containers containing substances presenting a risk of asphyxiation when used for cooling or conditioning purposes (such as dry ice (UN 1845) or nitrogen, refrigerated liquid (UN 1977) or argon, refrigerated liquid (UN 1951))
5.5.3.1 - Scope
5.5.3.2 - General
5.5.3.3 - Packages containing a coolant or conditioner
5.5.3.4 - Marking of packages containing a coolant or conditioner
5.5.3.5 - Vehicles and containers containing unpackaged dry ice
5.5.3.6 - Marking of vehicles and containers
5.5.3.7 - Documentation

6 - Requirements for the construction and testing of packagings, intermediate bulk containers (IBCs), large packagings, tanks and bulk containers

6 - Requirements for the construction and testing of packagings, intermediate bulk containers (IBCs), large packagings, tanks and bulk containers
6.1 - REQUIREMENTS FOR THE CONSTRUCTION AND TESTING OF PACKAGINGS
6.1.1 - General
6.1.2 - Code for designating types of packagings
6.1.3 - Marking
6.1.3.11 - Examples for marking NEW packagings
6.1.3.12 - Examples for marking RECONDITIONED packagings
6.1.3.13 - Example for marking SALVAGE packagings
6.1.3.14 - Certification
6.1.4 - Requirements for packagings
6.1.4.2 - Aluminium drums
6.1.4.5 - Plywood drums
6.1.4.9 - Boxes of natural wood
6.1.4.10 - Plywood boxes
6.1.4.11 - Reconstituted wood boxes
6.1.4.12 - Fibreboard boxes
6.1.4.13 - Plastics boxes
6.1.4.14 - Steel, aluminium or other metal boxes
6.1.4.15 - Textile bags
6.1.4.16 - Woven plastics bags
6.1.4.19 - Composite packagings (plastics material)
6.1.4.19.1 - Inner receptacle
6.1.4.19.2 - Outer packaging
6.1.4.20 - Composite packagings (glass, porcelain or stoneware)
6.1.4.20.1 - Inner receptacle
6.1.4.20.2 - Outer packaging
6.1.4.21 - Combination packagings
6.1.5 - Test requirements for packagings
6.1.5.1 - Performance and frequency of tests
6.1.5.2 - Preparation of packagings for testing
6.1.5.3 - Drop test 3
6.1.5.3.6 - Criteria for passing the test
6.1.5.5 - Internal pressure (hydraulic) test
6.1.5.5.6 - Stacking test
6.1.5.6 - Stacking test
6.1.5.7 - Supplementary permeability test for plastics drums and jerricans in accordance with 6.1.4.8 and for composite packagings (plastics material) in accordance with 6.1.4.19 intended for the carriage of liquids having a flash-point ≤ 60 °C, other than 6HA1 packagings
6.1.5.8 - Test Report
6.1.6 - Standard liquids for verifying the chemical compatibility testing of polyethylene packagings, including IBCs, in accordance with 6.1.5.2.6 and 6.5.6.3.5, respectively
6.2 - REQUIREMENTS FOR THE CONSTRUCTION AND TESTING OF PRESSURE RECEPTACLES, AEROSOL DISPENSERS, SMALL RECEPTACLES CONTAINING GAS (GAS CARTRIDGES) AND FUEL CELL CARTRIDGES CONTAINING LIQUEFIED FLAMMABLE GAS
6.2.1 - General requirements
6.2.1.1 - Design and construction
6.2.1.2 - Materials
6.2.1.3 - Service equipment
6.2.1.3.6 - Additional requirements for closed cryogenic receptacles
6.2.1.4 - Approval of pressure receptacles
6.2.1.5 - Initial inspection and test
6.2.1.6 - Periodic inspection and test
6.2.1.7 - Requirements for manufacturers
6.2.1.8 - Requirements for inspection bodies
6.2.2 - Requirements for UN pressure receptacles
6.2.2.1 - Design, construction and initial inspection and test
6.2.2.2 - Materials
6.2.2.3 - Service equipment
6.2.2.4 - Periodic inspection and test
6.2.2.5 - Conformity assessment system and approval for manufacture of pressure receptacles
6.2.2.5.2 - General requirements
6.2.2.5.3 - Manufacturer's quality system
6.2.2.5.4 - Approval process
6.2.2.6 - Approval system for periodic inspection and test of pressure receptacles
6.2.2.6.2 - General requirements
6.2.2.6.3 - Quality system and audit of the periodic inspection and test body
6.2.2.6.4 - Approval process for periodic inspection and test bodies
6.2.2.8 - Marking of non-refillable UN pressure receptacles
6.2.2.9 - Marking of UN metal hydride storage systems
6.2.2.10 - Marking of UN bundles of cylinders
6.2.2.11 - Equivalent procedures for conformity assessment and periodic inspection and test
6.2.3 - General requirements for non-UN pressure receptacles
6.2.3.1 - Design and construction
6.2.3.3 - Service equipment
6.2.3.4 - Initial inspection and test
6.2.3.5 - Periodic inspection and test
6.2.3.6 - Approval of pressure receptacles
6.2.3.7 - Requirements for manufacturers
6.2.3.8 - Requirements for inspection bodies
6.2.3.9 - Marking of refillable pressure receptacles
6.2.3.9.7 - Marking of bundles of cylinders
6.2.3.10 - Marking of non-refillable pressure receptacles
6.2.3.11 - Salvage pressure receptacles
6.2.4 - Requirements for non-UN pressure receptacles designed, constructed and tested according to referenced standards
6.2.4.2 - Periodic inspection and test
6.2.5 - Requirements for non-UN pressure receptacles not designed, constructed and tested according to referenced standards
6.2.5.1 - Materials
6.2.5.2 - Service equipment
6.2.5.3 - Metal cylinders, tubes, pressure drums and bundles of cylinders
6.2.5.4 - Additional provisions relating to aluminium-alloy pressure receptacles for compressed gases, liquefied gases, dissolved gases and non pressurized gases subject to special requirements (gas samples) as well as articles containing gas under pressure other than aerosol dispensers and small receptacles containing gas (gas cartridges)
6.2.5.5 - Pressure receptacles in composite materials
6.2.6 - General requirements for aerosol dispensers, small receptacles containing gas (gas cartridges) and fuel cell cartridges containing liquefied flammable gas
6.2.6.1 - Design and construction
6.2.6.2 - Hydraulic pressure test
6.2.6.3 - Tightness (leakproofness) test
6.2.6.3.1 - Hot water bath test
6.2.6.3.2.2 - Aerosol dispensers
6.2.6.3.2.3 - Gas cartridges and fuel cell cartridges
6.2.6.4 - Reference to standards
6.3 - REQUIREMENTS FOR THE CONSTRUCTION AND TESTING OF PACKAGINGS FOR CLASS 6.2 INFECTIOUS SUBSTANCES OF CATEGORY A
6.3.1 - General
6.3.2 - Requirements for packagings
6.3.3 - Code for designating types of packagings
6.3.4 - Marking
6.3.4.4 - Example of marking
6.3.5 - Test requirements for packagings
6.3.5.1 - Performance and frequency of tests
6.3.5.2 - Preparation of packagings for testing
6.3.5.3 - Drop test
6.3.5.3.6 - Special preparation of test sample for the drop test
6.3.5.4 - Puncture test
6.3.5.5 - Test report
6.4 - REQUIREMENTS FOR THE CONSTRUCTION, TESTING AND APPROVAL OF PACKAGES FOR RADIOACTIVE MATERIAL AND FOR THE APPROVAL OF SUCH MATERIAL
6.4.2 - General requirements
6.4.4 - Requirements for excepted packages
6.4.5 - Requirements for Industrial packages
6.4.5.4 - Alternative requirements for Types IP-2 and IP-3 packages
6.4.6 - Requirements for packages containing uranium hexafluoride
6.4.7 - Requirements for Type A packages
6.4.8 - Requirements for Type B(U) packages
6.4.9 - Requirements for Type B(M) packages
6.4.10 - Requirements for Type C packages
6.4.11 - Requirements for packages containing fissile material
6.4.12 - Test procedures and demonstration of compliance
6.4.13 - Testing the integrity of the containment system and shielding and evaluating criticality safety
6.4.14 - Target for drop tests
6.4.15 - Tests for demonstrating ability to withstand normal conditions of carriage
6.4.16 - Additional tests for Type A packages designed for liquids and gases
6.4.17 - Tests for demonstrating ability to withstand accident conditions in carriage
6.4.18 - Enhanced water immersion test for Type B(U) and Type B(M) packages containing more than 10^5 A2 and Type C packages
6.4.19 - Water leakage test for packages containing fissile material
6.4.20 - Tests for Type C packages
6.4.21 - Inspections for packagings designed to contain 0.1 kg or more of uranium hexafluoride
6.4.22 - Approvals of package designs and materials
6.4.23 - Applications and approvals for radioactive material carriage
6.5 - REQUIREMENTS FOR THE CONSTRUCTION AND TESTING OF INTERMEDIATE BULK CONTAINERS (IBCs)
6.5.1 - General requirements
6.5.1.1 - Scope
6.5.1.4 - Designatory code system for IBCs
6.5.2 - Marking
6.5.2.1 - Primary marking
6.5.2.2 - Additional marking
6.5.2.3 - Conformity to design type
6.5.2.4 - Marking of remanufactured composite IBCs (31HZ1)
6.5.3 - Construction requirements
6.5.3.1 - General requirements
6.5.4 - Testing, certification and inspection
6.5.4.4 - Inspection and testing
6.5.4.5 - Repaired IBCs
6.5.5 - Specific requirements for IBCs
6.5.5.1 - Specific requirements for metal IBCs
6.5.5.2 - Specific requirements for flexible IBCs
6.5.5.3 - Specific requirements for rigid plastics IBCs
6.5.5.4 - Specific requirements for composite IBCs with plastics inner receptacles
6.5.5.5 - Specific requirements for fibreboard IBCs
6.5.5.6 - Specific requirements for wooden IBCs
6.5.6 - Test requirements for IBCs
6.5.6.1 - Performance and frequency of tests
6.5.6.2 - Design type tests
6.5.6.3 - Preparation of IBCs for testing
6.5.6.3.7 - Design type tests required and sequential order
6.5.6.4 - Bottom lift test
6.5.6.5 - Top lift test
6.5.6.6 - Stacking test
6.5.6.7 - Leakproofness test
6.5.6.8 - Internal pressure (hydraulic) test
6.5.6.8.4 - Pressures to be applied
6.5.6.9 - Drop test
6.5.6.10 - Tear test
6.5.6.11 - Topple test
6.5.6.12 - Righting test
6.5.6.13 - Vibration test
6.5.6.13.3 - Test method and duration
6.5.6.14 - Test report
6.6 - REQUIREMENTS FOR THE CONSTRUCTION AND TESTING OF LARGE PACKAGINGS
6.6.1 - General
6.6.2 - Code for designating types of large packagings
6.6.3 - Marking
6.6.4 - Specific requirements for large packagings
6.6.4.1 - Specific requirements for metal large packagings
6.6.4.2 - Specific requirements for flexible material large packagings
6.6.4.3 - Specific requirements for plastics large packagings
6.6.4.4 - Specific requirements for fibreboard large packagings
6.6.4.5 - Specific requirements for wooden large packagings
6.6.5 - Test requirements for large packagings
6.6.5.1 - Performance and frequency of test
6.6.5.2 - Preparation for testing
6.6.5.3 - Test requirements
6.6.5.3.1 - Bottom lift test
6.6.5.3.2 - Top lift test
6.6.5.3.3 - Stacking test
6.6.5.3.4 - Drop test
6.6.5.3.4.5 - Criteria for passing the test
6.6.5.4 - Certification and test report
6.7 - REQUIREMENTS FOR THE DESIGN, CONSTRUCTION, INSPECTION AND TESTING OF PORTABLE TANKS AND UN MULTIPLE-ELEMENT GAS CONTAINERS (MEGCs)
6.7.1 - Application and general requirements
6.7.2 - Requirements for the design, construction, inspection and testing of portable tanks intended for the carriage of substances of Class 1 and Classes 3 to 9
6.7.2.1 - Definitions
6.7.2.2 - General design and construction requirements
6.7.2.3 - Design criteria
6.7.2.4 - Minimum shell thickness
6.7.2.5 - Service equipment
6.7.2.6 - Bottom openings
6.7.2.7 - Safety-relief devices
6.7.2.8 - Pressure-relief devices
6.7.2.9 - Setting of pressure-relief devices
6.7.2.10 - Fusible elements
6.7.2.11 - Frangible discs
6.7.2.12 - Capacity of pressure-relief devices
6.7.2.13 - Marking of pressure-relief devices
6.7.2.14 - Connections to pressure-relief devices
6.7.2.15 - Siting of pressure-relief devices
6.7.2.16 - Gauging devices
6.7.2.17 - Portable tank supports, frameworks, lifting and tie-down attachments
6.7.2.18 - Design approval
6.7.2.19 - Inspection and testing
6.7.2.20 - Marking
6.7.3 - Requirements for the design, construction, inspection and testing of portable tanks intended for the carriage of non-refrigerated liquefied gases
6.7.3.1 - Definitions
6.7.3.2 - General design and construction requirements
6.7.3.3 - Design criteria
6.7.3.4 - Minimum shell thickness
6.7.3.5 - Service equipment
6.7.3.6 - Bottom openings
6.7.3.7 - Pressure-relief devices
6.7.3.8 - Capacity of relief devices
6.7.3.9 - Marking of pressure-relief devices
6.7.3.10 - Connections to pressure-relief devices
6.7.3.11 - Siting of pressure-relief devices
6.7.3.12 - Gauging devices
6.7.3.13 - Portable tank supports, frameworks, lifting and tie-down attachments
6.7.3.14 - Design approval
6.7.3.15 - Inspection and testing
6.7.3.16 - Marking
6.7.4 - Requirements for the design, construction, inspection and testing of portable tanks intended for the carriage of refrigerated liquefied gases
6.7.4.1 - Definitions
6.7.4.2 - General design and construction requirements
6.7.4.3 - Design criteria
6.7.4.4 - Minimum shell thickness
6.7.4.5 - Service equipment
6.7.4.6 - Pressure-relief devices
6.7.4.7 - Capacity and setting of pressure-relief devices
6.7.4.8 - Marking of pressure-relief devices
6.7.4.9 - Connections to pressure-relief devices
6.7.4.10 - Siting of pressure-relief devices
6.7.4.11 - Gauging devices
6.7.4.12 - Portable tank supports, frameworks, lifting and tie-down attachments
6.7.4.13 - Design approval
6.7.4.14 - Inspection and testing
6.7.4.15 - Marking
6.7.5 - Requirements for the design, construction, inspection and testing of UN multiple-element gas containers (MEGCs) intended for the carriage of non-refrigerated gases
6.7.5.2 - General design and construction requirements
6.7.5.3 - Service equipment
6.7.5.4 - Pressure-relief devices
6.7.5.5 - Capacity of pressure relief devices
6.7.5.6 - Marking of pressure-relief devices
6.7.5.7 - Connections to pressure-relief devices
6.7.5.8 - Siting of pressure-relief devices
6.7.5.9 - Gauging devices
6.7.5.10 - MEGC supports, frameworks, lifting and tie-down attachments
6.7.5.11 - Design approval
6.7.5.12 - Inspection and testing
6.7.5.13 - Marking
6.8 - REQUIREMENTS FOR THE CONSTRUCTION, EQUIPMENT, TYPE APPROVAL, INSPECTIONS AND TESTS, AND MARKING OF FIXED TANKS (TANK-VEHICLES), DEMOUNTABLE TANKS AND TANK-CONTAINERS AND TANK SWAP BODIES, WITH SHELLS MADE OF METALLIC MATERIALS, AND BATTERY-VEHICLES AND MULTIPLE ELEMENT GAS CONTAINERS (MEGCs)
6.8.1 - Scope
6.8.2 - Requirements applicable to all classes
6.8.2.1 - Construction
6.8.2.2 - Items of equipment
6.8.2.3 - Type approval
6.8.2.4 - Inspections and tests
6.8.2.5 - Marking
6.8.2.6 - Requirements for tanks which are designed, constructed and tested according to referenced standards
6.8.3 - Special requirements applicable to Class 2
6.8.3.1 - Construction of shells
6.8.3.2 - Items of equipment
6.8.3.3 - Type approval
6.8.3.4 - Inspections and tests
6.8.3.5 - Marking
6.8.4 - Special provisions
6.8.5 - Requirements concerning the materials and construction of fixed welded tanks, demountable welded tanks, and welded shells of tank-containers for which a test pressure of not less than 1 MPa (10 bar) is required, and of fixed welded tanks, demountable welded tanks and welded shells of tank-containers intended for the carriage of refrigerated liquefied gases of Class 2
6.8.5.1 - Materials and shells
6.8.5.2 - Test requirements
6.8.5.3 - Impact-strength tests
6.8.5.4 - Reference to standards
6.9 - REQUIREMENTS FOR THE DESIGN, CONSTRUCTION, EQUIPMENT, TYPE APPROVAL, TESTING AND MARKING OF FIBRE-REINFORCED PLASTICS (FRP) FIXED TANKS (TANK-VEHICLES), DEMOUNTABLE TANKS, TANK-CONTAINERS AND TANK SWAP BODIES
6.9.1 - General
6.9.2 - Construction
6.9.2.3 - Raw materials
6.9.2.14 - Special requirements for the carriage of substances with a flash-point of not more than 60 °C
6.9.3 - Items of equipment
6.9.4 - Type testing and approval
6.9.4.2 - Material testing
6.9.4.3 - Type testing
6.9.4.4 - Type approval
6.9.5 - Inspections
6.9.6 - Marking
6.10 - REQUIREMENTS FOR THE CONSTRUCTION, EQUIPMENT, TYPE APPROVAL, INSPECTION AND MARKING OF VACUUM-OPERATED WASTE TANKS
6.10.1 - General
6.10.1.1 - Definition
6.10.1.2 - Scope
6.10.2 - Construction
6.10.3 - Items of equipment
6.10.4 - Inspection
6.11 - REQUIREMENTS FOR THE DESIGN, CONSTRUCTION, INSPECTION AND TESTING OF BULK CONTAINERS
6.11.2 - Application and general requirements
6.11.3 - Requirements for the design, construction, inspection and testing of containers conforming to the CSC used as BK1 or BK2 bulk containers
6.11.3.1 - Design and construction requirements
6.11.3.2 - Service equipment
6.11.3.3 - Inspection and testing
6.11.3.4 - Marking
6.11.4 - Requirements for the design, construction and approval of BK1 or BK2 bulk containers other than containers conforming to the CSC
6.11.5 - Requirements for the design, construction, inspection and testing of BK3 flexible bulk containers
6.11.5.1 - Design and construction requirements
6.11.5.2 - Service equipment and handling devices
6.11.5.3 - Inspection and testing
6.11.5.3.5 - Drop test
6.11.5.3.6 - Top lift test
6.11.5.3.7 - Topple test
6.11.5.3.8 - Righting test
6.11.5.3.9 - Tear test
6.11.5.3.10 - Stacking test
6.11.5.4 - Test report
6.11.5.5 - Marking
6.12 - REQUIREMENTS FOR THE CONSTRUCTION, EQUIPMENT, TYPE APPROVAL, INSPECTIONS AND TESTS, AND MARKING OF TANKS, BULK CONTAINERS AND SPECIAL COMPARTMENTS FOR EXPLOSIVES OF MOBILE EXPLOSIVES MANUFACTURING UNITS (MEMUs)
6.12.1 - Scope
6.12.2 - General provisions
6.12.3 - Tanks
6.12.3.1 - Tanks with a capacity of 1 000 litres or more
6.12.3.2 - Tanks with a capacity of less than 1 000 litres
6.12.4 - Items of equipment
6.12.5 - Special compartments for explosives

7 - Provisions concerning the conditions of carriage, loading, unloading and handling

7 - Provisions concerning the conditions of carriage, loading, unloading and handling
7.1 - GENERAL PROVISIONS
7.2 - PROVISIONS CONCERNING CARRIAGE IN PACKAGES
7.3 - PROVISIONS CONCERNING CARRIAGE IN BULK
7.3.1 - General provisions
7.3.2 - Provisions for the carriage in bulk when the provisions of 7.3.1.1 (a) are applied
7.3.2.3 - Goods of Class 4.2
7.3.2.4 - Goods of Class 4.3
7.3.2.5 - Goods of Class 5.1
7.3.2.6 - Goods of Class 6.2
7.3.2.7 - Material of Class 7
7.3.2.8 - Goods of Class 8
7.3.2.9 - Goods of Class 9
7.3.2.10 - Use of flexible bulk containers
7.3.3 - Provisions for carriage in bulk when the provisions of 7.3.1.1 (b) are applied
7.4 - PROVISIONS CONCERNING CARRIAGE IN TANKS
7.5 - PROVISIONS CONCERNING LOADING, UNLOADING AND HANDLING
7.5.1 - General provisions concerning loading, unloading and handling
7.5.2 - Mixed loading prohibition
7.5.4 - Precautions with respect to foodstuffs, other articles of consumption and animal feeds
7.5.5 - Limitation of the quantities carried
7.5.5.2 - Limitations with respect to explosive substances and articles
7.5.7 - Handling and stowage
7.5.7.6 - Loading of flexible bulk containers
7.5.8 - Cleaning after unloading
7.5.9 - Prohibition of smoking
7.5.10 - Precautions against electrostatic charges
7.5.11 - Additional provisions applicable to certain classes or specific goods

8 - Requirements for vehicle crews, equipment, operation and documentation

8 - Requirements for vehicle crews, equipment, operation and documentation
8.1 - GENERAL REQUIREMENTS CONCERNING TRANSPORT UNITS AND EQUIPMENT ON BOARD
8.1.1 - Transport units
8.1.2 - Documents to be carried on the transport unit
8.1.3 - Placarding and marking
8.1.4 - Fire-fighting equipment
8.1.5 - Miscellaneous equipment and equipment for personal protection
8.2 - REQUIREMENTS CONCERNING THE TRAINING OF THE VEHICLE CREW
8.2.1 - Scope and general requirements concerning the training of drivers
8.2.2 - Special requirements concerning the training of drivers
8.2.2.3 - Structure of training
8.2.2.4 - Initial training programme
8.2.2.5 - Refresher training programme
8.2.2.6 - Approval of training
8.2.2.7 - Examinations
8.2.2.7.1 - Examinations for the basic training course
8.2.2.7.2
8.2.2.8 - Certificate of driver's training
8.2.3 - Training of persons other than the drivers holding a certificate in accordance with 8.2.1, involved in the carriage of dangerous goods by road
8.3 - MISCELLANEOUS REQUIREMENTS TO BE COMPLIED WITH BY THE VEHICLE CREW
8.3.1 - Passengers
8.3.2 - Use of fire-fighting appliances
8.3.3 - Prohibition on opening packages
8.3.4 - Portable lighting apparatus
8.3.6 - Use of the parking brakes and wheel chocks
8.3.7 - Use of the parking brakes and wheel chocks
8.3.8 - Use of cables
8.4 - REQUIREMENTS CONCERNING THE SUPERVISION OF VEHICLES
8.5 - ADDITIONAL REQUIREMENTS RELATING TO PARTICULAR CLASSES OR SUBSTANCES
8.6 - ROAD TUNNEL RESTRICTIONS FOR THE PASSAGE OF VEHICLES CARRYING DANGEROUS GOODS
8.6.1 - General provisions
8.6.2 - Road signs or signals governing the passage of vehicles carrying dangerous goods
8.6.3 - Tunnel restriction codes
8.6.4 - Restrictions for the passage of transport units carrying dangerous goods through tunnels

9 - Requirements concerning the construction and approval of vehicles

9 - Requirements concerning the construction and approval of vehicles
9.1 - SCOPE, DEFINITIONS AND REQUIREMENTS FOR THE APPROVAL OF VEHICLES
9.1.1 - Scope and definitions
9.1.1.1 - Scope
9.1.1.2 - Definitions
9.1.2 - Approval of EX/II, EX/III, FL and AT vehicles and MEMUs
9.1.2.2 - Requirements for type-approved vehicles
9.1.3 - Certificate of approval
9.1.3.5 - Model for certificate of approval for vehicles carrying certain dangerous goods
9.2 - REQUIREMENTS CONCERNING THE CONSTRUCTION OF VEHICLES
9.2.1 - Compliance with the requirements of this Chapter
9.2.2 - Electrical equipment
9.2.2.1 - General provisions
9.2.2.2 - Wiring
9.2.2.3 - Fuses and circuit breakers
9.2.2.4 - Batteries
9.2.2.5 - Lighting
9.2.2.6 - Electrical connections between motor vehicles and trailers
9.2.2.6.2
9.2.2.7 - Voltage
9.2.2.8 - Battery master switch
9.2.2.9 - Permanently energized circuits
9.2.3 - Braking equipment
9.2.3.1 - General provisions
9.2.4 - Prevention of fire risks
9.2.4.1 - General provisions
9.2.4.3 - Fuel tanks and cylinders
9.2.4.4
9.2.4.7 - Combustion heaters
9.2.5 - Speed limitation device
9.2.6 - Coupling devices of motor vehicles and trailers
9.2.7 - Prevention of other risks caused by fuels
9.3 - ADDITIONAL REQUIREMENTS CONCERNING COMPLETE OR COMPLETED EX/II OR EX/III VEHICLES INTENDED FOR THE CARRIAGE OF EXPLOSIVE SUBSTANCES AND ARTICLES (CLASS 1) IN PACKAGES
9.3.1 - Materials to be used in the construction of vehicle bodies
9.3.2 - Combustion heaters
9.3.3 - EX/II vehicles
9.3.4 - EX/III vehicles
9.3.5 - Engine and load compartment
9.3.6 - External heat sources and load compartment
9.3.7 - Electrical equipment
9.4 - ADDITIONAL REQUIREMENTS CONCERNING THE CONSTRUCTION OF THE BODIES OF COMPLETE OR COMPLETED VEHICLES INTENDED FOR THE CARRIAGE OF DANGEROUS GOODS IN PACKAGES (OTHER THAN EX/II AND EX/III VEHICLES)
9.5 - ADDITIONAL REQUIREMENTS CONCERNING THE CONSTRUCTION OF THE BODIES OF COMPLETE OR COMPLETED VEHICLES INTENDED FOR THE CARRIAGE OF DANGEROUS SOLIDS IN BULK
9.6 - ADDITIONAL REQUIREMENTS CONCERNING COMPLETE OR COMPLETED VEHICLES INTENDED FOR THE CARRIAGE OF TEMPERATURE CONTROLLED SUBSTANCES
9.7 - ADDITIONAL REQUIREMENTS CONCERNING FIXED TANKS (TANK-VEHICLES), BATTERY-VEHICLES AND COMPLETE OR COMPLETED VEHICLES USED FOR THE CARRIAGE OF DANGEROUS GOODS IN DEMOUNTABLE TANKS WITH A CAPACITY GREATER THAN 1 M3 OR IN TANKCONTAINERS, PORTABLE TANKS OR MEGCs OF A CAPACITY GREATER THAN 3 M3 (EX/III, FL AND AT VEHICLES)
9.7.1 - General provisions
9.7.2 - Requirements concerning tanks
9.7.3 - Fastenings
9.7.4 - Earthing of FL vehicles
9.7.5 - Stability of tank-vehicles
9.7.6 - Rear protection of vehicles
9.7.7 - Combustion heaters
9.7.8 - Electrical equipment
9.7.9 - Additional safety requirements concerning EX/III vehicles
9.8 - ADDITIONAL REQUIREMENTS CONCERNING COMPLETE AND COMPLETED MEMUs
9.8.1 - General provisions
9.8.2 - Requirements concerning tanks and bulk containers
9.8.3 - Earthing of MEMUs
9.8.4 - Stability of MEMUs
9.8.5 - Rear protection of MEMUs
9.8.6 - Combustion heaters
9.8.7 - Additional safety requirements
9.8.8 - Additional security requirements

adrbook.com - Copyright all rights reserved. © 2015-2018