an application for approval of type b(u) or type c package design shall include:
(a) a detailed description of the proposed radioactive contents with reference to their physical
and chemical states and the nature of the radiation emitted;
(b) a detailed statement of the design, including complete engineering drawings and schedules of
materials and methods of manufacture;
(c) a statement of the tests which have been done and their results, or evidence based on
calculative methods or other evidence that the design is adequate to meet the applicable
requirements;
(d) the proposed operating and maintenance instructions for the use of the packaging;
(e) if the package is designed to have a maximum normal operating pressure in excess of 100 kpa
gauge, a specification of the materials of manufacture of the containment system, the samples to be
taken, and the tests to be made;
(f) where the proposed radioactive contents are irradiated nuclear fuel, a statement and a
justification of any assumption in the safety analysis relating to the characteristics of the fuel
and a description of any pre-shipment measurement as required by 6.4.11.5 (b);
(g) any special stowage provisions necessary to ensure the safe dissipation of heat from the
package considering the various modes of carriage to be used and type of vehicle or container;
(h) a reproducible illustration, not larger than 21 cm by 30 cm, showing the make-up of the
package; and
(i) a specification of the applicable management system as required in 1.7.3.