6.6.3.3

the maximum permitted stacking load applicable when the large packaging is in use shall be

displayed on a symbol as shown in figure 6.6.3.3.1 or figure 6.6.3.3.2. the symbol shall be durable

and clearly visible.

the minimum dimensions shall be 100 mm x 100 mm. the letters and numbers indicating the mass

shall be at least 12 mm high. the area within the printer’s marks indicated by the dimensional arrows

shall be square. where dimensions are not specified, all features shall be in approximate proportion to

those shown. the mass marked above the symbol shall not exceed the load imposed during the design

type test (see 6.6.5.3.3.4) divided by 1.8.